取消
显示结果 
搜索替代 
您的意思是: 
cancel
5849
查看次数
0
有帮助
3
回复

ASA 5505升级IOS问题

zhengwei272
Spotlight
Spotlight
公司有个ASA 5505要借给客户,让我看下是不是好的顺便把配置清了,我拿到手一看 CF卡里面没有IOS,开机报CISCO SYSTEMS Embedded BIOS Version 1.0(12)13 08/28/08 15:50:37.45
Low Memory: 632 KB
High Memory: 507 MB
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 01 00 1022 2080 Host Bridge
00 01 02 1022 2082 Chipset En/Decrypt 11
00 0C 00 1148 4320 Ethernet 11
00 0D 00 177D 0003 Network En/Decrypt 10
00 0F 00 1022 2090 ISA Bridge
00 0F 02 1022 2092 IDE Controller
00 0F 03 1022 2093 Audio 10
00 0F 04 1022 2094 Serial Bus 9
00 0F 05 1022 2095 Serial Bus 9
Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON
Cisco Systems ROMMON Version (1.0(12)13) #0: Thu Aug 28 15:55:27 PDT 2008
Platform ASA5505
Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.
Launching BootLoader...
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
Failsafe booting engaged.
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
开TFTP 灌IOS,
rommon #3> tftp
ROMMON Variable Settings:
ADDRESS=192.168.1.3
SERVER=192.168.1.1
GATEWAY=192.168.1.1
PORT=Ethernet0/0
VLAN=untagged
IMAGE=asa825-k8.bin
CONFIG=
LINKTIMEOUT=20
PKTTIMEOUT=4
RETRY=20
tftp asa825-k8.bin@192.168.1.1 via 192.168.1.1
!!!!!!!!!!!!!!!!!!!!!!
Received 15390720 bytes
Launching TFTP Image...
Cisco Security Appliance admin loader (3.0) #0: Fri May 20 16:01:46 MDT 2011
Platform ASA5505
Loading...
àdosfsck 2.11, 12 Mar 2005, FAT32, LFN
Currently, only 1 or 2 FATs are supported, not 255.
dosfsck(/dev/hda1) returned 1
mount: mounting /dev/hda1 on /mnt/disk0 failed: Invalid argument
mount: mounting /dev/hda1 on /mnt/disk0 failed: Invalid argument
Processor memory 383688704, Reserved memory: 62914560 (DSOs: 0 + kernel: 62914560)
Total SSMs found: 0
Total NICs found: 10
88E6095 rev 2 Gigabit Ethernet @ index 09 MAC: 0000.0003.0002
88E6095 rev 2 Ethernet @ index 08 MAC: e4d3.f12f.837b
88E6095 rev 2 Ethernet @ index 07 MAC: e4d3.f12f.837a
88E6095 rev 2 Ethernet @ index 06 MAC: e4d3.f12f.8379
88E6095 rev 2 Ethernet @ index 05 MAC: e4d3.f12f.8378
88E6095 rev 2 Ethernet @ index 04 MAC: e4d3.f12f.8377
88E6095 rev 2 Ethernet @ index 03 MAC: e4d3.f12f.8376
88E6095 rev 2 Ethernet @ index 02 MAC: e4d3.f12f.8375
88E6095 rev 2 Ethernet @ index 01 MAC: e4d3.f12f.8374
y88acs06 rev16 Gigabit Ethernet @ index 00 MAC: e4d3.f12f.837c
INFO: Unable to read firewall mode from flash
Writing default firewall mode (single) to flash
Running Activation Key: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
This activation key is not valid.
Use default settings only
Encryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0)
Boot microcode : CN1000-MC-BOOT-2.00
SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.05
i2c_write_byte_w_suspend() error, slot = 0x0, device = 0x40, address = 26 byte count = 1. Reason: I2C_UNPOPULATED_ERROR
Cisco Adaptive Security Appliance Software Version 8.2(5)
****************************** Warning *******************************
This product contains cryptographic features and is
subject to United States and local country laws
governing, import, export, transfer, and use.
Delivery of Cisco cryptographic products does not
imply third-party authority to import, export,
distribute, or use encryption. Importers, exporters,
distributors and users are responsible for compliance
with U.S. and local country laws. By using this
product you agree to comply with applicable laws and
regulations. If you are unable to comply with U.S.
and local laws, return the enclosed items immediately.
A summary of U.S. laws governing Cisco cryptographic
products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by
sending email to export@cisco.com.
******************************* Warning *******************************
Copyright (c) 1996-2011 by Cisco Systems, Inc.
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706


从TFTP灌的IOS解压安装到这边就卡住没反应了。试了好几个版本 官网最高的924 然后 845 825都试过了,都是一样。


然后发现有个坏的5505,把CF卡拆下来装这个机子上启动,
CISCO SYSTEMS
Embedded BIOS Version 1.0(12)13 08/28/08 15:50:37.45
Low Memory: 632 KB
High Memory: 507 MB
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 01 00 1022 2080 Host Bridge
00 01 02 1022 2082 Chipset En/Decrypt 11
00 0C 00 1148 4320 Ethernet 11
00 0D 00 177D 0003 Network En/Decrypt 10
00 0F 00 1022 2090 ISA Bridge
00 0F 02 1022 2092 IDE Controller
00 0F 03 1022 2093 Audio 10
00 0F 04 1022 2094 Serial Bus 9
00 0F 05 1022 2095 Serial Bus 9
Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON
Cisco Systems ROMMON Version (1.0(12)13) #0: Thu Aug 28 15:55:27 PDT 2008
Platform ASA5505
Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.
Boot interrupted.
Ethernet0/0
MAC Address: e4d3.f12f.837c
Link is UP
Use ? for help.
rommon #0> reload
Rebooting....
CISCO SYSTEMS
Embedded BIOS Version 1.0(12)13 08/28/08 15:50:37.45
Low Memory: 632 KB
High Memory: 507 MB
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 01 00 1022 2080 Host Bridge
00 01 02 1022 2082 Chipset En/Decrypt 11
00 0C 00 1148 4320 Ethernet 11
00 0D 00 177D 0003 Network En/Decrypt 10
00 0F 00 1022 2090 ISA Bridge
00 0F 02 1022 2092 IDE Controller
00 0F 03 1022 2093 Audio 10
00 0F 04 1022 2094 Serial Bus 9
00 0F 05 1022 2095 Serial Bus 9
Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON
Cisco Systems ROMMON Version (1.0(12)13) #0: Thu Aug 28 15:55:27 PDT 2008
Platform ASA5505
Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.
Launching BootLoader...
Default configuration file contains 1 entry.
Searching / for images to boot.
Loading /asa804-k8.bin... Booting...
Loading...
à
Processor memory 451465216, Reserved memory: 41943040 (DSOs: 0 + kernel: 41943040)
Guest RAM start: 0xc5000080
Guest RAM end: 0xdd400000
Guest RAM brk: 0xc5001000
IO memory 39403520 bytes
IO memory start: 0xc27f9000
IO memory end: 0xc4d8d000
Total SSMs found: 0
Total NICs found: 10
88E6095 rev 2 Gigabit Ethernet @ index 09 MAC: 0000.0003.0002
88E6095 rev 2 Ethernet @ index 08 MAC: e4d3.f12f.837b
88E6095 rev 2 Ethernet @ index 07 MAC: e4d3.f12f.837a
88E6095 rev 2 Ethernet @ index 06 MAC: e4d3.f12f.8379
88E6095 rev 2 Ethernet @ index 05 MAC: e4d3.f12f.8378
88E6095 rev 2 Ethernet @ index 04 MAC: e4d3.f12f.8377
88E6095 rev 2 Ethernet @ index 03 MAC: e4d3.f12f.8376
88E6095 rev 2 Ethernet @ index 02 MAC: e4d3.f12f.8375
88E6095 rev 2 Ethernet @ index 01 MAC: e4d3.f12f.8374
y88acs06 rev16 Gigabit Ethernet @ index 00 MAC: e4d3.f12f.837c
imb_upgrade_thread: IMB in slot 0 is version 1.8
imb_upgrade_thread: IMB in slot 0 is being upgraded to 1.7
i2c_write_byte_w_suspend() error, slot = 0x0, device = 0x40, address = 26 byte count = 1. Reason: I2C_UNPOPULATED_ERROR
IMBFS: Updating the IMB to v1.7. Please wait...
IMBFS: The IMB software was changed to v1.7.
Running Activation Key: 0x3a1f045e 0x50248de4 0x4ce12908 0x8264d840 0x8a07efb1
This activation key is not valid, use default settings only
Encryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0)
Boot microcode : CN1000-MC-BOOT-2.00
SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.05
Cisco Adaptive Security Appliance Software Version 8.0(4)
****************************** Warning *******************************
This product contains cryptographic features and is
subject to United States and local country laws
governing, import, export, transfer, and use.
Delivery of Cisco cryptographic products does not
imply third-party authority to import, export,
distribute, or use encryption. Importers, exporters,
distributors and users are responsible for compliance
with U.S. and local country laws. By using this
product you agree to comply with applicable laws and
regulations. If you are unable to comply with U.S.
and local laws, return the enclosed items immediately.
A summary of U.S. laws governing Cisco cryptographic
products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by
sending email to export@cisco.com.
******************************* Warning *******************************
Copyright (c) 1996-2008 by Cisco Systems, Inc.
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
结果还是一样卡在这,请各位帮忙看看是什么问题
1 个已接受解答

已接受的解答

pxhen
Spotlight
Spotlight
i2c_write_byte_w_suspend() error, slot = 0x0, device = 0x40, address = 26 byte count = 1. Reason: I2C_UNPOPULATED_ERROR
有芯片报错了,硬件故障,不是IOS问题

在原帖中查看解决方案

3 条回复3

pxhen
Spotlight
Spotlight
i2c_write_byte_w_suspend() error, slot = 0x0, device = 0x40, address = 26 byte count = 1. Reason: I2C_UNPOPULATED_ERROR
有芯片报错了,硬件故障,不是IOS问题

one-time
Level 13
Level 13
感谢您的提问!稍后会有小伙伴为您解答的!

zhengwei272
Spotlight
Spotlight
pxhen 发表于 2017-5-12 11:21
i2c_write_byte_w_suspend() error, slot = 0x0, device = 0x40, address = 26 byte count = 1. Reason: I2 ...

哦,好的 谢谢了,我查下服务开case试试
入门指南

使用上面的搜索栏输入关键字、短语或问题,搜索问题的答案。

我们希望您在这里的旅程尽可能顺利,因此这里有一些链接可以帮助您快速熟悉思科社区:









快捷链接