奇怪哦 ，用的思科的anycounect 我用win7测试 就可以正常连接，但是win10 就 显示VPN session enden
连接不上，是什么原因？
Licensed features for this platform:
Maximum Physical Interfaces : 8
VLANs : 20, DMZ Unrestricted
Inside Hosts : Unlimited
Failover : Active/Standby
VPN-DES : Enabled
VPN-3DES-AES : Enabled
SSL VPN Peers : 10
Total VPN Peers : 25
Dual ISPs : Enabled
VLAN Trunk Ports : 8
Shared License : Disabled
AnyConnect for Mobile : Disabled
AnyConnect for Linksys phone : Disabled
AnyConnect Essentials : Enabled
Advanced Endpoint Assessment : Disabled
UC Phone Proxy Sessions : 2
Total UC Proxy Sessions : 2
Botnet Traffic Filter : Disabled
webvpn
enable outside
anyconnect-essentials
svc image disk0:/anyconnect-win-2.4.1012-k9.pkg 1
svc enable
tunnel-group-list enable
group-policy vpnclient-default internal
group-policy vpnclient-default attributes
vpn-idle-timeout 20
split-tunnel-policy tunnelspecified
split-tunnel-network-list value office
group-policy client internal
group-policy client attributes
vpn-tunnel-protocol svc webvpn
split-tunnel-policy tunnelspecified
split-tunnel-network-list value office
webvpn
url-list none
svc ask enable
username admin password VaqdSTyycYiVoL3E encrypted
username cisco password miNpFG.9QSZNEuyO encrypted privilege 15
username ando password ou2IaFMwZIUwSU0d encrypted privilege 0
username ando attributes
vpn-group-policy client
tunnel-group client type remote-access
tunnel-group client general-attributes
address-pool sslpool
default-group-policy client
tunnel-group client webvpn-attributes
group-alias client enable
