取消
显示结果 
搜索替代 
您的意思是: 
cancel
9066
查看次数
20
有帮助
3
回复

思科防火墙破解密码

李东杰
Level 1
Level 1
1,通过Console口连接设备
  2,密码恢复程序
  在设备启动过程中,迅速按ESCCTRL+BREAK 键进入Rommon状态。
  rommon#0>
  然后我们打入命令confreg0x41,进行配置寄存器值的修改。如下
  rommon#1> confreg 0x41
  UpdateConfig Register 0x41 in NVRAM
  修改后,就可以重启,输入 " boot " 如下。
  rommon#2> boot
  启动成功进入ASA以后,enable密码为空。
  输入 enable 如下。
  ciscoasa>enable
  password这步直接敲回车。现在ASA 密码为空。如下
  Password: 密码为空,直接敲回车。
  然后输入如下命令
  ciscoasa#copy startup-config running-config
  ciscoasa#configure terminal
  然后设置新的enable密码为cisco
  ciscoasaconfig# enablepassword cisco
  然后必须修改回原来的配置寄存器的值,命令如下。
  ciscoasaconfig#config-register 0x11
  最后必须保存配置文件,切记,否则新密码无效,命令如下。
  ciscoasaconfig# copyrunning-config startup-config
3 条回复3

lxw615117
Level 1
Level 1
nice,学习了

Stan Huang
Cisco Employee
Cisco Employee
How about firepower series and Meraki?

bo chen
Spotlight
Spotlight
学习了!{:2_31:}
入门指南

使用上面的搜索栏输入关键字、短语或问题,搜索问题的答案。

我们希望您在这里的旅程尽可能顺利,因此这里有一些链接可以帮助您快速熟悉思科社区:









快捷链接