YilinChen 发表于 2017-12-28 08:57
这么说吧,技术上肯定可以实现的,要想判断问题出在哪里,还是贴一下完整配置,比较好。
Router#show running-config
Building configuration...
Current configuration : 2161 bytes
!
! Last configuration change at 03:07:24 UTC Tue Dec 26 2017 by bj
!
version 15.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
!
enable password
!
no aaa new-model
!
!
!
!
!
!
!
!
!
!
!
ip dhcp excluded-address 192.168.1.1 192.168.1.10
ip dhcp excluded-address 192.168.1.253
ip dhcp excluded-address 192.168.1.254
!
ip dhcp pool bj
network 192.168.1.0 255.255.255.0
default-router 192.168.1.254
dns-server 111.11.11.1
!
!
!
no ip domain lookup
ip cef
no ipv6 cef
!
multilink bundle-name authenticated
!
!
cts logging verbose
!
!
license udi pid CISCO2911/K9 sn FGL214190ML
!
!
username bj password 0 cisco
!
redundancy
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface Embedded-Service-Engine0/0
no ip address
shutdown
!
interface GigabitEthernet0/0
ip address 10.1.1.1 255.255.255.0
ip nat outside
ip virtual-reassembly in
duplex auto
speed auto
!
interface GigabitEthernet0/1
ip address 192.168.1.254 255.255.255.0
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
!
interface GigabitEthernet0/2
no ip address
shutdown
duplex auto
speed auto
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
ip nat inside source list 1 interface GigabitEthernet0/0 overload
ip nat inside source static tcp 192.168.1.1 3389 10.1.1.1 3390 extendable
ip route 0.0.0.0 0.0.0.0 10.1.1.2
!
!
!
access-list 1 permit 192.168.1.0 0.255.255.255
!
control-plane
!
!
!
line con 0
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
password cisco
login local
transport input telnet
!
scheduler allocate 20000 1000
!
end