取消
显示结果 
搜索替代 
您的意思是: 
cancel
4569
查看次数
42
有帮助
7
评论
LinusT
Cisco Employee
Cisco Employee
Proceed with reload? [confirm]
*Sep 7 10:09:25.051: %SYS-5-RELOAD: Reload requested by guangxil on console. Reload Reason: Reload Command.
RO ROMMON (00000000)
Initializing DRAM <<<<<<<<<<<<< Initialize Memory DIMMs through I2C bus
Clearing DRAM 1st 16MB..... done <<<<<<<<<<<<<< Write 0's to DDR2 memory for the first 256MB memory
Performing the Memory POST Test >>>>>>>>>>>>>> 1.
Testing memory - L2 data cache ECC
Testing memory - L2 instruction cache ECC
Testing memory - ECC DDR memory
Memory POST Test Success >>>>>>>>>>>>>>>>1. Testing CPU internal Memory
Memory tests are from 0x80403000 to 0x80503000 >>>>>>>>>>>>2.
Testing memory - all 0xffffffff
Testing memory - data equals address
Testing memory - checkerboard
Testing memory - inverse checkerboard
Testing memory - all 0x00000000
Memory test complete -- PASS >>>>>>>>>>2.Testing On-Board Memory within specified address location with different pattems
Relocating the code to DRAM <<<<<<<<<<<<<<<<< Copy portion of rommon image to DDR2 memory
Continue initializing the platform
Clearing the rest of 1st 256MB (240MB).....
Clearing next 256MB of On-board DRAM
Memory tests are from 0x80000000 to 0x80403000 >>>>>>>>>>>>>>>>3.
Testing memory - all 0xffffffff
Testing memory - data equals address
Testing memory - checkerboard
Testing memory - inverse checkerboard
Testing memory - all 0x00000000
Memory test complete -- PASS
Memory tests are from 0x80803000 to 0x80B03000
Testing memory - all 0xffffffff
Testing memory - data equals address
Testing memory - checkerboard
Testing memory - inverse checkerboard
Testing memory - all 0x00000000
Memory test complete -- PASS
Memory tests are from 0x80B23F38 to 0x81000000
Testing memory - all 0xffffffff
Testing memory - data equals address
Testing memory - checkerboard
Testing memory - inverse checkerboard
Testing memory - all 0x00000000
Memory test complete -- PASS >>>>>>>>>>>>>>3.Initialize and test of the DDR2 memory
Retrieve board id 1
Reset type is System Reset
No Frequency Margin
Performing the CPU BIST Test
Testing memory - CPU internal memory
CPU BIST Success
Performing the IOCTRL BIST Test
IOCTRL BIST Success
Before CFI command
Passed CFI querry string
Value for write(TYP)=6
Value for write(Max)=3
Value for write buffer(TYP)=6
Value for write buffer(Max)=5
Value for erase(TYP)=9
Value for erase(MAX)=3
cfi_write_time = 400
cfi_wr_buf_time = 1000
cfi_erase_time = 7d0000
After CFI commandInit Rommon Upgrade NVRAM Vars <<<<<<<Compact Flash Initialization >>>>>>>>unless the failure keeps showing up after couple rommeon boot up
Compact Flash 0 is present
Power recycle of CF 0 successful
CF 1 not present
System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1) <<<
Technical Support: http://www.cisco.com/techsupport <<<
Copyright (c) 2012 by cisco Systems, Inc. <<<
Total memory size = 512 MB - On-board = 512 MB, DIMM0 = 0 MB <<<
Set up ROMMON TLB
Disable the 3rd level watchdog during mem test
Enable the 3rd level watchdog after mem test
Initialize PCIE Interface and Goofy >>>>>>>>>>>>Initializes PCIE interface between CPU and I/O Contorller; if fails, check CPU 100MHz differential
Enable EHWIC reference clock <<<<<<<
Enable second reference clock source
Read second_ref_clock CLK2 : rc = 1 data [0x16]
Write second_ref_clock CLK2 : rc = 1 data [0x16]
Init Exception
Init Platform Cookie
Other core(s) process
Sizing NVRAM
Set Up Environmental Data
Validate EEPROM Checksum. <<<<<<<<<<<Turn off the 2rd level watchdog
Turn off the 3rd level watchdog
Exiting Init
CISCO1941/K9 platform with 524288 Kbytes of main memory <<<
Main memory is configured to 64/-1(On-board/DIMM0) bit mode with ECC disabled <<<
Readonly ROMMON initialized <<<
rommon 1 > boot
program load complete, entry point: 0x80803000, size: 0x1b340
program load complete, entry point: 0x80803000, size: 0x1b340
IOS Image Load Test
___________________
Digitally Signed Release Software
program load complete, entry point: 0x81000000, size: 0x50101fc
Stack pointer : 0x8EFFFF80
monstack : 0x80FFFFC0
monra : 0x80410474
edata : 0x81019300
start : 0x81019300
magic : 0xFEEDFACE
memsize : 0x0F000000
uncomp_size : 0x0AB72988
comp_size : 0x04FF6EE6
STACK_BYTES : 0x00008000
COPY_CODE_BUF : 0x00000800
_end : 0x81045000
comp_checksum : 0xB4636796
comp_checksum : 0xB4636796
uncomp_checksum : 0x811E7BBC
Self decompressing the image : ####################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################### [OK]
Source elf_hdr->e_shnum = 0x0000000D
Setting up to copy ELF section 0x00000001
to image_info section 0x00000000
sh_name = 0x0000000B
sh_type = 0x00000001
sh_flags = 0x00000007
sh_addr = 0x81000000
sh_offset = 0x00001000
sh_size = 0x05F52000
sh_link = 0x00000000
sh_info = 0x00000000
sh_addralign = 0x00002000
sh_entsize = 0x00000000
Setting up to copy ELF section 0x00000002
to image_info section 0x00000001
sh_name = 0x00000011
sh_type = 0x00000001
sh_flags = 0x00000002
sh_addr = 0x86F52000
sh_offset = 0x05F53000
sh_size = 0x02107FE0
sh_link = 0x00000000
sh_info = 0x00000000
sh_addralign = 0x00000008
sh_entsize = 0x00000000
Setting up to copy ELF section 0x00000003
to image_info section 0x00000002
sh_name = 0x00000019
sh_type = 0x00000001
sh_flags = 0x00000002
sh_addr = 0x89059FE0
sh_offset = 0x0805AFE0
sh_size = 0x00000064
sh_link = 0x00000000
sh_info = 0x00000000
sh_addralign = 0x00000004
sh_entsize = 0x00000000
Setting up to copy ELF section 0x00000004
to image_info section 0x00000003
sh_name = 0x00000023
sh_type = 0x00000001
sh_flags = 0x00000002
sh_addr = 0x8905A044
sh_offset = 0x0805B044
sh_size = 0x011C9658
sh_link = 0x00000000
sh_info = 0x00000000
sh_addralign = 0x00000004
sh_entsize = 0x00000000
Setting up to copy ELF section 0x00000005
to image_info section 0x00000004
sh_name = 0x0000002D
sh_type = 0x00000001
sh_flags = 0x00000003
sh_addr = 0x8A2236EC
sh_offset = 0x092246EC
sh_size = 0x0103EEB4
sh_link = 0x00000000
sh_info = 0x00000000
sh_addralign = 0x00000080
sh_entsize = 0x00000000
Setting up to copy ELF section 0x00000006
to image_info section 0x00000005
sh_name = 0x00000033
sh_type = 0x00000001
sh_flags = 0x00000003
sh_addr = 0x8B2625A0
sh_offset = 0x0A2635A0
sh_size = 0x00000020
sh_link = 0x00000000
sh_info = 0x00000000
sh_addralign = 0x00000001
sh_entsize = 0x00000000
Setting up to copy ELF section 0x00000007
to image_info section 0x00000006
sh_name = 0x0000003A
sh_type = 0x00000001
sh_flags = 0x10000003
sh_addr = 0x8B2625C0
sh_offset = 0x0A2635C0
sh_size = 0x000027A0
sh_link = 0x00000000
sh_info = 0x00000000
sh_addralign = 0x00000010
sh_entsize = 0x00000000
Setting up to copy ELF section 0x00000008
to image_info section 0x00000007
sh_name = 0x00000041
sh_type = 0x00000001
sh_flags = 0x10000003
sh_addr = 0x8B264D60
sh_offset = 0x0A265D60
sh_size = 0x00008D20
sh_link = 0x00000000
sh_info = 0x00000000
sh_addralign = 0x00000008
sh_entsize = 0x00000000
cpu type : 0x00000040
uncomp_size : 0x0AB72988
monstack : 0x80FFFFC0
image_info.entry_point = 0x81004F80
image_info.section_count = 0x00000008
image_info.monstack = 0x80FFFFC0
image_info.monra = 0x80410474
image_info.param0 = 0x00000002
image_info.param1 = 0x00000000
image_info.param2 = 0x80B0F770
image_info.param3 = 0x81000000
Section Index = 0x00000000
source = 0x81046100
dest = 0x81004F80
bytes = 0x05F52000
Section Index = 0x00000001
source = 0x86F98100
dest = 0x86F56F80
bytes = 0x02107FE0
Section Index = 0x00000002
source = 0x890A00E0
dest = 0x8905EF60
bytes = 0x00000064
Section Index = 0x00000003
source = 0x890A0144
dest = 0x8905EFC4
bytes = 0x011C9658
Section Index = 0x00000004
source = 0x8A2697EC
dest = 0x8A22866C
bytes = 0x0103EEB4
Section Index = 0x00000005
source = 0x8B2A86A0
dest = 0x8B267520
bytes = 0x00000020
Section Index = 0x00000006
source = 0x8B2A86C0
dest = 0x8B267540
bytes = 0x000027A0
Section Index = 0x00000007
source = 0x8B2AAE60
dest = 0x8B269CE0
bytes = 0x00008D20
Smart Init is enabled
smart init is sizing iomem
TYPE MEMORY_REQ
Onboard devices &
buffer pools 0x01E8F000
-----------------------------------------------
TOTAL: 0x01E8F000
Rounded IOMEM up to: 32MB.
Using 6 percent iomem. [32MB/512MB]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.6(3)M1, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2016 by Cisco Systems, Inc.
Compiled Fri 02-Dec-16 15:02 by prod_rel_team
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Installed image archive
Cisco CISCO1941/K9 (revision 1.0) with 491520K/32768K bytes of memory.
Processor board ID FGL183925EQ
2 Gigabit Ethernet interfaces
1 terminal line
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity disabled.
255K bytes of non-volatile configuration memory.
255488K bytes of ATA System CompactFlash 0 (Read/Write)
--- System Configuration Dialog ---
Would you like to enter the initial configuration dialog? [yes/no]: no
Press RETURN to get started!
*Jan 2 00:00:02.083: %SMART_LIC-6-AGENT_READY: Smart Agent for Licensing is initialized
*Jan 2 00:00:02.399: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c1900 Next reboot level = ipbasek9 and License = ipbasek9
*Jan 2 00:00:02.595: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c1900 Next reboot level = securityk9 and License = securityk9
*Jan 2 00:00:02.795: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c1900 Next reboot level = datak9 and License = datak9
*Sep 7 10:12:23.619: c3600_scp_set_dstaddr2_idb(185)add = 80 name is Embedded-Service-Engine0/0
*Sep 7 10:12:38.575: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State changed to: Initialized
*Sep 7 10:12:38.579: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State changed to: Enabled
*Sep 7 10:12:45.239: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to up
*Sep 7 10:12:45.239: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down
*Sep 7 10:12:46.287: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up
*Sep 7 10:12:46.287: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to down
*Sep 7 10:12:47.699: %SYS-6-STARTUP_CONFIG_IGNORED: System startup configuration is ignored based on the configuration register setting.
*Sep 7 10:12:59.663: %LINK-5-CHANGED: Interface Embedded-Service-Engine0/0, changed state to administratively down
*Sep 7 10:12:59.663: %LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to administratively down
*Sep 7 10:12:59.663: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to administratively down
*Sep 7 10:13:00.695: %LINEPROTO-5-UPDOWN: Line protocol on Interface Embedded-Service-Engine0/0, changed state to down
*Sep 7 10:13:00.695: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to down
*Sep 7 10:13:01.927: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.6(3)M1, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2016 by Cisco Systems, Inc.
Compiled Fri 02-Dec-16 15:02 by prod_rel_team
*Sep 7 10:13:02.603: %SYS-6-BOOTTIME: Time taken to reboot after reload = 222 seconds
*Sep 7 10:13:03.215: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*Sep 7 10:13:03.215: %CRYPTO-6-GDOI_ON_OFF: GDOI is OFF
*Sep 7 10:13:03.215: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*Sep 7 10:13:03.215: %CRYPTO-6-GDOI_ON_OFF: GDOI is OFF
Router>
评论
wuleihen
Spotlight
Spotlight
请问,这有何有用信息不?
LinusT
Cisco Employee
Cisco Employee
wuleihen 发表于 2018-9-10 09:22
请问,这有何有用信息不?

G2路由器开机不能正常启动的时候能看到具体是在启动的哪里出了问题
李可
Community Member
多谢楼主分享
Mansur
Spotlight
Spotlight
备注信息很详细
LinusT
Cisco Employee
Cisco Employee
maguanghua2013 发表于 2018-10-13 16:30
备注信息很详细

谢谢,当时学习的时候记录的备注。:P
one-time
Level 13
Level 13
楼主,原创分享内容建议在标题中添加【原创】标签哦
fortune
VIP Alumni
VIP Alumni
感谢分享,学习了
入门指南

使用上面的搜索栏输入关键字、短语或问题,搜索问题的答案。

我们希望您在这里的旅程尽可能顺利,因此这里有一些链接可以帮助您快速熟悉思科社区:









快捷链接