取消
显示结果 
搜索替代 
您的意思是: 
cancel
4363
查看次数
0
有帮助
3
评论
liu_zhimin
Spotlight
Spotlight
本帖最后由 liu.zhimin 于 2019-3-5 19:30 编辑
CiscoCatalyst 3850 Series Switches交换机CPU为四核,所以常见的网管监控平台无法针对设备所有CPU进行监控。(建议大家不要依赖网管监控平台)
我是通过ping 3850设备发现延迟发现这个问题的(延迟为1至20ms不等),通常设备针对ping的流量优先级最低,如果设备CPU繁忙则会出现ping高延迟的问题。
通过设备showprocess cpu sorted detailed可以看到CPU四个核基本都达到90%以上,其中占用最多的进程为fed。
升级步骤:如果3850做了堆叠,需要两台一起升级,整个升级过程需要25分钟,请大家务必在非交易时间进行升级。

详细如下:
------------------show process cpu sorted detailed ------------------
Core0: CPU utilization for five seconds: 97%; one minute: 90%; five minutes: 86%
Core1: CPU utilization for five seconds: 97%; one minute: 87%; five minutes: 81%
Core2: CPU utilization for five seconds: 99%; one minute: 76%; five minutes: 82%
Core3: CPU utilization for five seconds: 99%; one minute: 84%; five minutes: 65%
PID T C TID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
(%) (%) (%)
6050 L 2806047 3037317 384 73.64 73.43 73.72 1088 fed
6050 L 0 6490 2997319 14606720 24.37 24.22 24.23 0 fed-ots-main
6050 L 2 11093 2556317 1149317 0 24.13 24.20 24.26 0 PunjectRx
6050 L 1 10588 1073477 2112100 0 15.46 14.25 16.45 0 Xcvr
6050 L 3 11459 1491764 2367863 0 8.91 10.05 7.99 0 XcvrPoll
6050 L 3 6493 4039417 65131500 0.44 0.49 0.52 0 fed-ots-nfl

通过确定,此为3850 IOS的bug,bug id为CSCuz57493,建议大家排查下各自在用的3850 IOS是否有涉及到相应版本。(版本如下)
建议尽快修复,以免影响网络正常运行从而影响业务使用。

受BUG影响软件版本:
15.2(3)E5以下版本
15.2(2)E6以下版本

3.6(6)E以下版本
BUG修复版本:
15.2(3)E5及以上版本
15.2(2)E6
及以上版本

3.6(6)E及以上版本
备注:(BUG描述)
High CPU utilization due to FED andpunjectrx. These are some possible processes, please have TAC confirm thisdefect as there could be multiple reasons why this occurs.
High Processes are likely to be one of the following:
FED/fed-ots-main
FED/Punject Rx
FED/XCVR
FED/XCVRPoll
stack-mgr/Replenish OOB
stack-mgr/OOBnd RX
Conditions:
This can be easily seen in the switches/stacks that has longuptime (several months).
Workaround:
When the problem is happening NONE of the following optionswork:
- CPP (Control-Plane Policing)
- Storm control
- This problem can be confirmed by checking CPU usage fromkernel perspective (Only TAC can check the kernel)
Reload the device to resolve the issue until code upgrade topick up permanent fix
If this is a stack of multiple switches, a 'redundancyforce-switchover' will not necessarily clear this.

评论
one-time
Level 13
Level 13
感谢楼主分享,您已成功参与“送给女神的礼物,我们已经帮你准备好了”活动。谢谢!:handshake
one2
Level 7
Level 7
谢谢分享!
18653465190
Spotlight
Spotlight
感谢楼主的分享
入门指南

使用上面的搜索栏输入关键字、短语或问题,搜索问题的答案。

我们希望您在这里的旅程尽可能顺利,因此这里有一些链接可以帮助您快速熟悉思科社区:









快捷链接