取消
显示结果 
搜索替代 
您的意思是: 
cancel
5405
查看次数
0
有帮助
5
回复

大神们 我这个 思科AP1815 瘦AP 我想刷成胖的 他一直报这个 敲不了命令 怎么弄啊

wx_m8Or18i3
Level 1
Level 1
大神们 我这个 思科AP1815 瘦AP 我想刷成胖的 他一直报这个 敲不了命令 怎么弄啊!谢谢了150335ua6aldhdws20l6mm.png它一直在这里 输入不了命令急死我了
5 条回复5

YilinChen
Spotlight
Spotlight
Reset the AP to the default factory-shipped configuration.
Clear the AP internal storage, including all configuration files and the regulatory domain configuration.
To use the mode button, press, and keep pressed, the mode button on the access point during the boot cycle. Wait until the status LED changes to Amber. During this, the AP console shows a seconds counter, counting the number of seconds the mode button is pressed. Then:
To reset the AP to the default factory-shipped configuration, keep the mode button pressed for less than 20 seconds. The AP configuration files are cleared.
This resets all configuration settings to factory defaults, including passwords, encryption keys, the IP address, and the SSID. However, the regulatory domain provisioning is not reset.
To clear the AP internal storage, including all configuration files and the regulatory domain configuration, keep the mode button pressed for more than 20 seconds, but less than 60 seconds.
The AP status LED changes from Amber to Red, and all the files in the AP storage directory are cleared.
If you keep the mode button pressed for more than 60 seconds, the mode button is assumed faulty and no changes are made.
参考链接:
https://www.cisco.com/c/en/us/td/docs/wireless/access_point/1815/quick/guide/ap1815igetstart.html

Wubin2010
Spotlight
Spotlight
第一种方法:利用Cisco的Upgrade Tool升级
  对胖ap降级成瘦AP的操作需要软件如下:CiscoAironet-AP-to-LWAPP-Upgrade-Tool-v34.exe 和相应的IOS软件
  例如:c1130-rcvk9w8-tar.123-11JX1.tar,注意:无需解压缩
  软件下载回来之后,进行安装就可以了!
  启动软件,界面如下:
  Step 1:在应用软件前,请您将您电脑的终端联入AP,并在BVI口配置相应的IP地址,例如:192.168.1.1 255.255.255.0 注意:以太口是不需要配置的,并且配置AP的 telnet username和telnet password和enable password,例如:
  Ap(config)#username ap password ap
  #enable secret cisco ap 经测试enable passowrd这个不好用,而secret是好用的。
  Step2:用网线将您的PC和AP的以太口连接在一起,并将PC机的IP设置成与AP BVI接口相同网段的IP地址,例如:192.168.1.2 255.255.255.0,并测试连通性。
  Step3:应用该软件进行操作,软件中有个IP File需要我们去手工操作,新建一个文本文件,然后按照如下格式填写下面内容:
  Ap-ip-address,telnet-usernmae,telnet-password,enable-password
  按照上面的举例,这里可以如下填写即可:如果有多个AP,回车换行继续填写即可。
  192.168.1.1,ap,ap,ciscoap 保存即可
  然后在IP File 点击流量,选中我们做好的这个文件
  Step4::Upgrade Optios 这里前两项是不需要选择的,只需选中最后一项即可
  Step5:在LWAPP Recovery Image这里选中第一项,以本软件作为TFTP Server,这个软件是具备TFTP功能的,如果您想用其他TFTP Server,那么请您选中第二项,这时您需要在下面的TFTP Server IP Address里输入TFTP Server的IP地址,并保证可达。在LWAPP Recovery Image处选择我们下载好的IOS文件。MAX.AP这里选择您要操作的AP个数,如果您要操作多个IP,记得IP File文件里要写多个AP的操作信息。
  Step6:在下面的对话框里按照如下操作即可,这些选项中只需要选择Time Detail即可,其他可不填写。
  Step7:确认我们填写的无误之后,可点击下方的即开始对AP操作了,几分钟后就可以完成操作,然后将AP断电,重启一个胖ap就变成瘦AP了。
  思科官方文档地址:
  http://www.cisco.com/en/US/docs/ ... guide/lwapnote.html
  第二种方法:直接通过WEB管理页面升级,该方法适用于1250系列AP
  第三种方法:开机按mode键方法,这种方法适用于AP升级出现过问题的状况,比如flash有坏块
  1、 首先准备瘦AP的IOS文件
  2、 准备TFTP的环境。(还是用3CDaemon吧,今天曾经用过另外两个tftp软件,同样的条件都无法更新成功。而且3CDaemon还可以随时看到监控记录,便于分析问题),把目录指向要升级的镜像目录。
  TFTP的服务器主机ip地址设置为10.0.0.2 255.0.0.0,IOS文件改名为“c1250-k9w7-tar.default”(IP地址和IOS文件名这样改从后面的提示中可以知道是为什么)
3、设备与PC设置为同一网段,TFTP工具的IOS目录设置正确,上电自动会升级。
  3、 超级终端、控制口连接到AP,以便监控状态。
  4、 按住ap上的mode键,然后插上电源,等30秒,出现如下提示
  flashfs[0]: 3 files, 2 directories
  flashfs[0]: 0 orphaned files, 0 orphaned directories
  flashfs[0]: Total bytes: 15998976
  flashfs[0]: Bytes used: 1867776
  flashfs[0]: Bytes available: 14131200
  flashfs[0]: flashfs fsck took 26 seconds.
  Base ethernet MAC Address: 00:1d:a1:ff:3c:dc
  Initializing ethernet port 0...
  Reset ethernet port 0...
  Reset done!
  ethernet link up, 100 mbps, full-duplex
  Ethernet port 0 initialized: link is up
  button is pressed, wait for button to be released...
  看到上面wait的提示后,松开mode键,一定要松哦,不松不开始
  button pressed for 29 seconds
  process_config_recovery: set IP address and config to default 10.0.0.1
  process_config_recovery: image recovery
  image_recovery: Download default IOS tar image tftp://255.255.255.255/c1250-k9w7-tar.default(

方便分享下那个upgrade tool么?CiscoAironet-AP-to-LWAPP-Upgrade-Tool-v34.exe,没看到哪里可以下了,谢谢。

38927715@qq.com

wx_m8Or18i3
Level 1
Level 1
YilinChen 发表于 2019-9-9 15:49
Reset the AP to the default factory-shipped configuration.
Clear the AP internal storage, including ...

我按住模式按钮没用啊,我这个是瘦的,里面没有地址,我想把他刷成ME胖AP带AC功能的,可是我进去了控制台,一直提示在找DHCP 根本输入不了命令,按什么都没反应。是什么情况啊。思科AP1800 2800 3800 4800 思科第二代AC都是这样,我看视频教程别人就能敲命令,是不是有什么快捷键?

wx_m8Or18i3
Level 1
Level 1
不行 都试试了 先在 是 敲不了命令
入门指南

使用上面的搜索栏输入关键字、短语或问题,搜索问题的答案。

我们希望您在这里的旅程尽可能顺利,因此这里有一些链接可以帮助您快速熟悉思科社区:









快捷链接