取消
显示结果 
搜索替代 
您的意思是: 
cancel
3901
查看次数
20
有帮助
5
回复

Aironet 3700如何连接电脑设置

huanghuang60262
Level 1
Level 1
我时个小白手上有一个AIR-CAP3702E-H-K9想知道如何才能连接到电脑上设置这个AP呢?我这里有控制线。谢谢诸位了。
1 个已接受解答

已接受的解答

YilinChen
Spotlight
Spotlight
本帖最后由 YilinChen 于 2020-8-19 15:44 编辑
CAP 从型号上看,出厂IOS是瘦AP;需要刷成胖AP
但不知道你这台AP的实际情况,如果有CONSOLE线,还是连上去看一下;具体操作步骤可以参考下面这个文档:
https://www.cisco.com/c/en/us/td/docs/wireless/access_point/atnms-ap-82/configuration/guide/cg-82-book/cg-chap20-firmware.html#73237

在原帖中查看解决方案

5 条回复5

YilinChen
Spotlight
Spotlight
本帖最后由 YilinChen 于 2020-8-19 15:44 编辑
CAP 从型号上看,出厂IOS是瘦AP;需要刷成胖AP
但不知道你这台AP的实际情况,如果有CONSOLE线,还是连上去看一下;具体操作步骤可以参考下面这个文档:
https://www.cisco.com/c/en/us/td/docs/wireless/access_point/atnms-ap-82/configuration/guide/cg-82-book/cg-chap20-firmware.html#73237

du.xl
Spotlight
Spotlight
刷成胖AP,配置完成就可以了,你这个型号是瘦AP不能单独管理,需要控制器

huanghuang60262
Level 1
Level 1
comlan 发表于 2020-8-19 15:07
刷成胖AP,配置完成就可以了,你这个型号是瘦AP不能单独管理,需要控制器

谢谢你了,现在能有超级终端连接了并刷了
ap3g2-k9w7-tar.153-3.JPJ3a.tar

这个,用ap#configure t
ap(config)#interfaceBVI1
ap(config-if)#ip address 192.168.0.200 255.255.255.0
ap(config-if)#no shut
ap(config-if)#exit
ap(config)#ip default-gateway 192.168.0.1
ap(config-if)#end
ap#wr 这个方法配置了IP可还是不能用网页进入,ping 192.168.0.200是通的。可否给些意见呢?

huanghuang60262
Level 1
Level 1
YilinChen 发表于 2020-8-19 15:28
CAP 从型号上看,出厂IOS是瘦AP;需要刷成胖AP
但不知道你这台AP的实际情况,如果有CONSOLE线,还是连上去 ...

谢谢你了,现在能有超级终端连接了并刷了
ap3g2-k9w7-tar.153-3.JPJ3a.tar
这个,用ap#configure t
ap(config)#interfaceBVI1
ap(config-if)#ip address 192.168.0.200 255.255.255.0
ap(config-if)#no shut
ap(config-if)#exit
ap(config)#ip default-gateway 192.168.0.1
ap(config-if)#end
ap#wr 这个方法配置了IP可还是不能用网页进入,ping 192.168.0.200是通的。可否给些意见呢?

huanghuang60262
Level 1
Level 1
刷过后显示的信息,现在不能从网页端连接ap
ap#show version
Cisco IOS Software, C3700 Software (AP3G2-K9W7-M), Version 15.3(3)JPJ3a, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2020 by Cisco Systems, Inc.
Compiled Mon 25-May-20 13:09 by prod_rel_team
ROM: Bootstrap program is C3700 boot loader
BOOTLDR: C3700 Boot Loader (AP3G2-BOOT-M) LoaderVersion 15.2(4)JB, RELEASE SOFTWARE (fc1)
ap uptime is 3 hours, 48 minutes
System returned to ROM by power-on
System image file is "flash:/ap3g2-k9w7-mx.153-3.JPJ3a/ap3g2-k9w7-xx.153-3.JPJ3a"
Last reload reason:
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco AIR-SAP3702E-H-K9 (PowerPC) processor (revision A0) with 376814K/134656K bytes of memory.
Processor board ID FGL2107A7WU
PowerPC CPU at 800Mhz, revision number 0x2151
Last reset from power-on
1 Gigabit Ethernet interface
2 802.11 Radios

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: F8:0B:CB:1B:46:00
Part Number : 73-15397-01
PCB Serial Number : FOC21036F24
Top Assembly Part Number : 068-05055-07
Top Assembly Serial Number : FGL2107A7WU
Top Revision Number : A0
Product/Model Number : AIR-CAP3702E-H-K9



Configuration register is 0xF
入门指南

使用上面的搜索栏输入关键字、短语或问题,搜索问题的答案。

我们希望您在这里的旅程尽可能顺利,因此这里有一些链接可以帮助您快速熟悉思科社区:









快捷链接