取消
显示结果 
搜索替代 
您的意思是: 
cancel
6907
查看次数
10
有帮助
6
回复

SNMP队列满了怎么办

shanghaiyunji
Level 1
Level 1
请问各位大哥:3750交换机报了个SNMP队列满了的错误:%SNMP-3-INPUT_QFULL_ERR : Packet dropped due to input queue full
有没有解决办法?
1 个已接受解答

已接受的解答

xupeng
Cisco Employee
Cisco Employee
如果没办法调小SNMP访问频率,可以先把SNMP配置no掉,这样SNMP的Q会被清空(因为没有对应的流量了), 再重新配置SNMP, 观察一段时间,看看是否有同样问题.

#sh snmp //可以查看当前的状态
3330 SNMP packets input
0 Bad SNMP version errors
607 Unknown community name
0 Illegal operation for community name supplied
1 Encoding errors
1286 Number of requested variables
0 Number of altered variables
40 Get-request PDUs
1091 Get-next PDUs
0 Set-request PDUs
0 Input queue packet drops (Maximum queue size 1000)<<<<<<
2617 SNMP packets output
0 Too big errors (Maximum packet size 1500)
0 No such name errors
0 Bad values errors
0 General errors
364 Response PDUs
169 Trap PDUs
SNMP global trap: disabled
SNMP logging: disabled
SNMP agent enabled
(config)#snmp-server queue-length //通过此命令增大Q的队列深度

在原帖中查看解决方案

6 条回复6

xupeng
Cisco Employee
Cisco Employee
如果没办法调小SNMP访问频率,可以先把SNMP配置no掉,这样SNMP的Q会被清空(因为没有对应的流量了), 再重新配置SNMP, 观察一段时间,看看是否有同样问题.

#sh snmp //可以查看当前的状态
3330 SNMP packets input
0 Bad SNMP version errors
607 Unknown community name
0 Illegal operation for community name supplied
1 Encoding errors
1286 Number of requested variables
0 Number of altered variables
40 Get-request PDUs
1091 Get-next PDUs
0 Set-request PDUs
0 Input queue packet drops (Maximum queue size 1000)<<<<<<
2617 SNMP packets output
0 Too big errors (Maximum packet size 1500)
0 No such name errors
0 Bad values errors
0 General errors
364 Response PDUs
169 Trap PDUs
SNMP global trap: disabled
SNMP logging: disabled
SNMP agent enabled
(config)#snmp-server queue-length //通过此命令增大Q的队列深度

one-time
Level 13
Level 13
感谢您的提问!稍后会有小伙伴为您解答的!

xupeng
Cisco Employee
Cisco Employee
把SNMP停掉,或者调小SNMP访问的频率

感谢您的回复,20金钱已发放给您了

shanghaiyunji
Level 1
Level 1
xupeng 发表于 2017-5-11 15:36
把SNMP停掉,或者调小SNMP访问的频率

请问,怎么调小SNMP访问的频率?

xupeng
Cisco Employee
Cisco Employee
shanghaiyunji 发表于 2017-5-11 18:28
请问,怎么调小SNMP访问的频率?

在SNMP服务器端修改 (不是在交换机一侧修改)
入门指南

使用上面的搜索栏输入关键字、短语或问题,搜索问题的答案。

我们希望您在这里的旅程尽可能顺利,因此这里有一些链接可以帮助您快速熟悉思科社区:









快捷链接