求助:NX7010交换机镜像端口问题

[钉子]

资料上说NX7000系列交换机可做48组镜像,但同时Active的只有2组,现我想启动第2 组,提示没有硬件资源,配置如下:
Nex-7K# sh run moni
!Command: show running-config monitor
!Time: Wed Jun 28 16:42:34 2017
version 6.1(2)
monitor session 1
source interface Ethernet1/11 both
source interface Ethernet1/21 both
source interface Ethernet8/25 both
source interface Ethernet9/9 both
source interface Ethernet9/10 both
source interface Ethernet9/17 both
source interface Ethernet9/18 both
source vlan 60 both
destination interface Ethernet9/32
no shut
monitor session 2
source interface Ethernet1/21 both
destination interface Ethernet1/26
no shut
Nx7010上启动了VDC,但在Vdc上没有做镜像

[martinchow · Accepted solution]

确定其它vdc没有启用span?
7K每系统只支持2个同active的span，意味着所有vdc里配置的span总共active的只能有二个.

[one-time]

感谢您的提问，期待小伙伴的回复！