取消
显示结果 
搜索替代 
您的意思是: 
cancel
2822
查看次数
0
有帮助
3
回复

没有rate-limit 这条命令

mingchen89543
Spotlight
Spotlight
rate-limit output access-group 101 1000000 8000 16000 conform-action transmit exceed-action drop
新版本是不是改了这条命令
3 条回复3

junnyang
Cisco Employee
Cisco Employee
First we will need to create a class-map where we can match the traffic by using ACL
#class-map match-any
Match access-group 101 //you need to configure the ACL to match the traffic.
2. Then we will create a Policy map where we will apply the police calling the class that we created
#policy-map
Class
Police 128000 8000 8000 conform-action transmit exceed-action drop
//This is the syntax of the above command: police bps burst-normal burst-max conform-action action exceed-action action violate-action action
3. Lastly we will apply the policy map to an interface matching the policy name:
#int gi0/0/1 //you can use interface as per your network traffic.
Service-policy input

Rockyw
Spotlight
Spotlight
目前在Cisco路由器设备中,只有支持思科快速转发(CEF)的路由器或交换机才能使用rate-limit来限速,具体设置可以按如下步骤进行。
信息来源:Cisco路由器限速:CEF rate-limit限速
http://network.51cto.com/art/201109/288974.htm
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Rockyw | If it solves your problem, please mark as answer. Thanks !

Rockyw
Spotlight
Spotlight
这一篇也可以参考一下
Configuring Rate Limits
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/4_1/nx-os/security/configuration/guide/sec_nx-os-cfg/sec_limits.html
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Rockyw | If it solves your problem, please mark as answer. Thanks !
入门指南

使用上面的搜索栏输入关键字、短语或问题,搜索问题的答案。

我们希望您在这里的旅程尽可能顺利,因此这里有一些链接可以帮助您快速熟悉思科社区:









快捷链接