vss实施后出现的问 求解

[BaocaiWang8628]

vss实施成功 设备在重启后备机8槽出现下面情况：
sh module switch 2
Switch Number: 2 Role: Virtual Switch Standby
---------------------- -----------------------------
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 40 DCEF2T 8 port 40GE / 32 port 10GE C6800-32P10G
2 24 CEF720 24 port 1000mb SFP WS-X6724-SFP
3 48 CEF720 48 port 1000mb SFP WS-X6748-SFP
5 5 Supervisor Engine 2T 10GE w/ CTS (Hot) VS-SUP2T-10G
6 5 Supervisor Engine 2T 10GE w/ CTS (CSSO VS-SUP2T-10G
8 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
1 78bc.1aa5.fec0 to 78bc.1aa5.fee7 2.2 15.2(1r)SYL3 15.5(1)SY3 Ok
2 6c20.569a.0f44 to 6c20.569a.0f5b 5.1 12.2(18r)S1 15.5(1)SY3 Ok
3 ecbd.1d86.5ed4 to ecbd.1d86.5f03 3.1 12.2(18r)S1 15.5(1)SY3 Ok
5 e00e.dabc.5a39 to e00e.dabc.5a40 2.1 12.2(50r)SYS 15.5(1)SY3 Ok
6 7488.bbff.a170 to 7488.bbff.a177 2.1 12.2(50r)SYS 15.5(1)SY3 Ok
8 001e.f709.1150 to 001e.f709.117f 2.6 12.2(14r)S5 15.5(1)SY3 Ok
Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- ------- -------
1 Distributed Forwarding Card C6800-DFC 2.2 Ok
1 Distributed Forwarding Card C6800-DFC 2.1 Ok
2 Distributed Forwarding Card WS-F6K-DFC4-A 2.1 Ok
3 Distributed Forwarding Card WS-F6K-DFC4-A 2.1 Ok
5 Policy Feature Card 4 VS-F6K-PFC4 3.0 Ok
5 CPU Daughterboard VS-F6K-MSFC5 3.1 Ok
6 Policy Feature Card 4 VS-F6K-PFC4 3.0 Ok
6 CPU Daughterboard VS-F6K-MSFC5 3.1 Ok
8 Distributed Forwarding Card WS-F6K-DFC4-A 2.1 Ok
Mod Online Diag Status
---- -------------------
1 Pass
2 Pass
3 Pass
5 Pass
6 Pass
8 Minor Error




sh diagnostic result switch 2 module 8


Current bootup diagnostic level: minimal


Switch 2 Module 8: CEF720 48 port 10/100/1000mb Ethernet SerialNo : SAL13400503


Overall Diagnostic Result for Switch 2 Module 8 : MINOR ERROR
Diagnostic level at card bootup: minimal


Test results: (. = Pass, F = Fail, U = Untested)


1) TestLoopback:


Port 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
----------------------------------------------------------------------------
. . . . . . . . . . . . . . . . . . . . . . . .


Port 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
----------------------------------------------------------------------------
. . . . . . . . . . . . . . . . . F . . . . . .




2) TestScratchRegister -------------> .
3) TestSynchedFabChannel -----------> .
4) TestNewIndexLearn ---------------> .
5) TestDontConditionalLearn --------> .
6) TestBpduTrap --------------------> .
7) TestMatchCapture ----------------> .
8) TestProtocolMatch ---------------> .
9) TestPortSecurity ----------------> .
10) TestMacNotification -------------> .
11) TestIPv4FibShortcut -------------> .
12) TestL3Capture2 ------------------> .
13) TestIPv6FibShortcut -------------> .
14) TestMPLSFibShortcut -------------> .
15) TestNATFibShortcut --------------> .
16) TestAclPermit -------------------> .
17) TestAclDeny ---------------------> .
18) TestAclRedirect -----------------> .
19) TestRBAcl -----------------------> .
20) TestQos -------------------------> .
21) TestL3VlanMet -------------------> .
22) TestIngressSpan -----------------> .
23) TestEgressSpan ------------------> .
24) TestNetflowShortcut -------------> .
25) TestInbandEdit ------------------> .
26) TestFirmwareDiagStatus ----------> .
27) TestAsicSync --------------------> .
28) TestOBFL ------------------------> .
29) TestErrorCounterMonitor ---------> .
30) TestUnusedPortLoopback:


Port 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
----------------------------------------------------------------------------
U U U U U U U U U U U . U U U U U U U U U U U .


Port 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
----------------------------------------------------------------------------
U U U U U U U U U U U . U U U U U U U U U U U .




31) TestPortTxMonitoring:


Port 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
----------------------------------------------------------------------------
U U U U U U U U U U U U U U U U U U U U U U U U


Port 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
----------------------------------------------------------------------------
U U U U U U U U U U U U U U U U U U U U U U U U




32) TestEobcStressPing --------------> U
33) TestFibTcam ---------------------> U
34) TestAclQosTcam ------------------> U
35) TestEarlMemOnBootup -------------> .
36) TestAsicMemory ------------------> U
37) TestLtlFpoeMemoryConsistency ----> .
38) TestRwEngineOverSubscription ----> U
39) TestEARLInternalTables ----------> .
快速hello 显示结果 有一项不知道什么意思
sh switch virtual dual-active fast-hello
Fast-hello dual-active detection enabled: Yes


Fast-hello dual-active interfaces:
Port Local State Peer Port Remote State
---------------------------------------------------
Gi1/5/3 Link up Gi2/5/3 Link up
Gi1/6/3 Link up Gi2/6/3 Link dn

[wuhao0015]

http://www.cisco.com/c/en/us/support/docs/switches/catalyst-6500-series-switches/24053-193.html
run show diagnostic events
if see. TestErrorCounterMonitor
The TestErrorCounterMonitor has detected that an error counter in the specified module has exceeded a threshold. This message contains specific data about the error counter, including the ASIC and register of the counter, and the error count.
This error message is received when an ASIC on the linecard receives packets with a bad CRC. The issue may be local to this module or may be triggered by some other faulty module in the chassis.
The reason for this error can be because the newly inserted module was not firmly inserted.
Reseat the module in order to resolve the problem.

[BaocaiWang8628]

已经解决了 走了RMA CISCO 建议重启设备。