isr 4331 easy vpn 客户端配置命令

[jiahao xian]

本帖最后由 xjh1108lxn1128 于 2019-4-15 16:08 编辑
求助各位
isr 4331 easy vpn 客户端配置命令怎么配置吗？ isr4300-universalk9.03.16.04b.S.155-3.S4b-ext.SPA.bin
设备有lic
Index 3 Feature: securityk9
Period left: Life time
License Type: RightToUse
License State: Active, In Use
License Count: Non-Counted
License Priority: Low
以前的命令配置如下：已经没有了
crypto ipsec client ezvpn ezvpnclient
connect auto
group vpnclient key cisco
mode network-plus
peer x.x.x.x
xauth userid mode local

[wuhao0015 · Accepted solution]

IOS-XE现在不支持ezvpn。
【原创】IOS-XE远程连接之二Anyconnect-EAP
http://bbs.csc-china.com.cn/forum.php?mod=viewthread&tid=988610&fromuid=4603
(出处: 思科社区)

[jiahao xian]

非常感谢，我也开了case问了，cisco tac 也说不支持了。
ISR4k and all other IOS-XE platforms do not support the EZVPN Client feature. Per documentation, EZVPN Server is supported but the Client configuration is not. I looked back and found a discussion I had with the ISR4k development team and they confirmed that this feature is not supported and there are no plans to add support. The migration path would be to move to FlexVPN (site to site or server/client) or DMVPN (site to site).