取消
显示结果 
搜索替代 
您的意思是: 
cancel
3341
查看次数
14
有帮助
3
回复

cisco 6509 部分端口ping不通

小斌
Level 1
Level 1
------------------ show version ------------------
Cisco IOS Software, s2t54 Software (s2t54-ADVIPSERVICESK9-M), Version 15.1(2)SY, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Wed 04-Sep-13 12:37 by prod_rel_team
ROM: System Bootstrap, Version 12.2(50r)SYS3, RELEASE SOFTWARE (fc1)
GDDS-VS6509 uptime is 3 years, 3 days, 15 hours, 17 minutes
Uptime for this control processor is 1 year, 14 weeks, 6 days, 4 hours, 45 minutes
System returned to ROM by Stateful Switchover at 13:24:09 UTC Mon Jun 6 2016
System restarted at 21:26:25 UTC Mon Jun 6 2016
System image file is "bootdisk:s2t54-advipservicesk9-mz.SPA.151-2.SY.bin"
Last reload reason: unknown reload cause - reason ptr 0x17, PC 0x527F7E0, address 0x527F7E0
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
interface TenGigabitEthernet2/6/3
description bad port
no switchport
no ip address
TenGigabitEthernet2/6/3 is down, line protocol is down (notconnect)
Hardware is C6k 10000Mb 802.3, address is b4e9.b0c8.dd00 (bia b4e9.b0c8.dd00)
Description: bad port
MTU 1500 bytes, BW 10000000 Kbit, DLY 10 usec,
reliability 255/255, txload 0/255, rxload 0/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 10Gb/s
input flow-control is off, output flow-control is off
Clock mode is auto
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:04:26, output never, output hang never
Last clearing of "show interface" counters 00:13:46
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 3766602026
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
L2 Switched: ucast: 0 pkt, 0 bytes - mcast: 0 pkt, 0 bytes
L3 in Switched: ucast: 0 pkt, 0 bytes - mcast: 0 pkt, 0 bytes
L3 out Switched: ucast: 0 pkt, 0 bytes - mcast: 0 pkt, 0 bytes
48471 packets input, 4959812 bytes, 0 no buffer
Received 48469 broadcasts (0 IP multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 2 frame, 0 overrun, 0 ignored
0 watchdog, 0 multicast, 2797300 pause input
0 input packets with dribble condition detected
1028744917844 packets output, 697102243319577 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 PAUSE output
0 output buffer failures, 0 output buffers swapped out
3 条回复3

fortune
VIP Alumni
VIP Alumni
(notconnect 是表示物理down,你要测试下 线缆跟PC 测试下看看,如果一直都是down的,有模块看看更换个好的模块试试看。 如果还是down,估计是端口坏了的说

jingjian
Spotlight
Spotlight
TenGigabitEthernet2/6/3 is down, line protocol is down (notconnect)
根据端口的状态显示二层连接有问题,
1.请检查你的跳线是否有问题,可以把此跳线连接到其他的空接口,查看端口是否可以up,从而可以判断跳线是否有问题。
2可以把此接口的光模块和其他接口的光模块互换,判断此模块和端口是否有问题
通过上面的测试基本可以确认问题的原因

RenxChen
Spotlight
Spotlight
PING不通是有很多原因,从贴的配置,
只能看到描述是bad
description bad port
并且没有连接,二层协议down
TenGigabitEthernet2/6/3 is down, line protocol is down (notconnect)
还是个三层接口,没有配置IP
no switchport
no ip address。
可以给接口配个地址,直连个设备看下能不能ping。
入门指南

使用上面的搜索栏输入关键字、短语或问题,搜索问题的答案。

我们希望您在这里的旅程尽可能顺利,因此这里有一些链接可以帮助您快速熟悉思科社区:









快捷链接