版本信息如下:
Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500e-LANBASE-M), Version 15.0(2)SG5, RELEASE SOFTWARE (fc1)
Technical Support:
http://www.cisco.com/techsupport Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 31-Jul-12 04:12 by prod_rel_team
Image text-base: 0x10000000, data-base: 0x128C6878
ROM: 12.2(44r)SG10
Darkside Revision 4, Nexu Revision 14, Fortooine Revision 1.32
HY-SW4506E-Main uptime is 1 week, 6 days, 16 hours, 29 minutes
System returned to ROM by power-on
System image file is "bootflash:cat4500e-lanbase-mz.150-2.SG5.bin"
cisco WS-C4506-E (MPC8548) processor (revision 13) with 524288K bytes of memory.
Processor board ID FXS1707Q05G
MPC8548 CPU at 1GHz, Supervisor 6L-E
Last reset from PowerUp
42 Virtual Ethernet interfaces
88 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
511K bytes of non-volatile configuration memory.
Configuration register is 0x2101
现在的情况是,4506做网关,同一IP地址比如(192.168.10.5)换了网卡,即mac地址改变,就不能访问ping通网关了,必须在配置模式下,执行arp 192.168.10.5 xxxx.xxxx.xxxx arpa,在执行no arp 192.168.10.5 xxxx.xxxx.xxxx arpa才能正常。各位大神看下这是什么问题,怎么解决呢?谢谢!