The system boothas been aborted. The following
commands willfinish loading the operating system
software:
ether_init
tftp_init
boot
2、设置以太网接口IP地址
ap: set IP_ADDR10.1.1.1
ap: set NETMASK255.255.255.0
3、启动TFTP 软件，初始化AP tftp服务、flash、以太网
ap: tftp_init
tftp_initsuccess: You can now use tftp file system!
ap: ether_init
Initializingethernet port 0...
Ethernet speedis 100 Mb - FULL Duplex
ap: flash_init
InitializingFlash...
...The flash isalready initialized.
4、从TFTP 下载软件版本
5、设置新IOS 并重启设备
ap: set BOOT flash:// ap1g2-k9w7-tar.152-4.JB3a.tar
ap: boot
