取消
显示结果 
搜索替代 
您的意思是: 
cancel
19797
查看次数
42
有帮助
14
回复

如何关闭思科AP上的LED灯呢

Tonystack
Level 1
Level 1
请问各位牛人,小弟调试思科的3802 1852等等的AP,现在客户需要在黑暗环境下使用,所以嫌AP上的led指示灯和网口灯比较亮,又不想贴东西挡住灯光,请问有没有命令可以关闭AP的led。谢谢啦
1 个已接受解答

已接受的解答

wuleihen
Spotlight
Spotlight
config ap led-state
To enable or disable the LED-State for an access point, or to configure the flashing of LEDs, use the config ap led-state command.
config ap led-state { enable | disable} { cisco_ap | all}
config ap led-state flash { seconds | indefinite | disable} { cisco_ap | dual-band}
Syntax Description
enable Enables the access point’s LED state.
disable Disables the access point’s LED state.
cisco_ap Name of a Cisco lightweight access point.
flash Configure the flashing of LEDs for an access point.
seconds Duration that the LEDs have to flash. The range is from 1 to 3600 seconds.
indefinite Configures indefinite flashing of the access point’s LED.
dual-band Configures the LED state for all dual-band access points.

在原帖中查看解决方案

14 条回复14

wuleihen
Spotlight
Spotlight
config ap led-state
To enable or disable the LED-State for an access point, or to configure the flashing of LEDs, use the config ap led-state command.
config ap led-state { enable | disable} { cisco_ap | all}
config ap led-state flash { seconds | indefinite | disable} { cisco_ap | dual-band}
Syntax Description
enable Enables the access point’s LED state.
disable Disables the access point’s LED state.
cisco_ap Name of a Cisco lightweight access point.
flash Configure the flashing of LEDs for an access point.
seconds Duration that the LEDs have to flash. The range is from 1 to 3600 seconds.
indefinite Configures indefinite flashing of the access point’s LED.
dual-band Configures the LED state for all dual-band access points.

SMG-SH
Level 7
Level 7
这真是个奇葩的要求,说不好真有命令

Rockyw
Spotlight
Spotlight
就算接口的灯可以关闭,电源灯关不了吧。除非物理遮挡,要不然这个需求估计很难满足。
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Rockyw | If it solves your problem, please mark as answer. Thanks !

Rockyw
Spotlight
Spotlight
貌似只有AP能够关闭Led灯
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Rockyw | If it solves your problem, please mark as answer. Thanks !

Rockyw
Spotlight
Spotlight
还有一个方法就是将Led的供电物理切断,但这需要拆机,操作起来估计不容易
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Rockyw | If it solves your problem, please mark as answer. Thanks !

YilinChen
Spotlight
Spotlight
关闭LED灯是有命令可以实现的

winsun
Level 1
Level 1
在控制器上登陆后,
1、在上方的导航栏选择“Wireless”;
2、在左方的栏目选择“All APs”;
3、选择你希望关闭LED指示灯的AP;
4、选择“advanced”;
5、LED State 打勾,选择“Disabled”;
6、Apply 应用;
7、“Save Configuration”

winsun
Level 1
Level 1
115048u18dkphcidcvil70.jpg

winsun
Level 1
Level 1
Rocky 发表于 2018-5-11 11:16
就算接口的灯可以关闭,电源灯关不了吧。除非物理遮挡,要不然这个需求估计很难满足。

AP只有一个灯。接口没有灯

Rockyw
Spotlight
Spotlight
winsun 发表于 2018-5-15 11:52
AP只有一个灯。接口没有灯

审题不仔细,以为要关闭所有设备
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Rockyw | If it solves your problem, please mark as answer. Thanks !

winsun
Level 1
Level 1
Rocky 发表于 2018-5-15 21:15
审题不仔细,以为要关闭所有设备

:lol老师没少因为审题而丢分的事情罚你吧?:lol

Rockyw
Spotlight
Spotlight
winsun 发表于 2018-5-16 08:15
老师没少因为审题而丢分的事情罚你吧?

没当学生很多年了
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Rockyw | If it solves your problem, please mark as answer. Thanks !

gejunyu
Spotlight
Spotlight
web控制台应该可以找到

dcyz
Level 1
Level 1
winsun 发表于 2018-5-15 11:49
在控制器上登陆后,
1、在上方的导航栏选择“Wireless”;
2、在左方的栏目选择“All APs”;

怎么找到某一个ap
入门指南

使用上面的搜索栏输入关键字、短语或问题,搜索问题的答案。

我们希望您在这里的旅程尽可能顺利,因此这里有一些链接可以帮助您快速熟悉思科社区:









快捷链接