ciscoEWC控制器怎么开启无线客户端隔离

[fang1]

ciscoEWC控制器怎么开启无线客户端隔离针对单独的SSID

[Rps-Cheers]

参考一下：
peer-blocking [ drop | forward-upstream]
Example:
Device(config)# peer-blocking drop
Configures peer to peer blocking parameters. The keywords are as follows:
drop—Enables peer-to-peer blocking on the drop action.
forward-upstream—No action is taken and forwards packets to the upstream

[Rps-Cheers]

Step 1
Choose Configuration > Wireless > WLANs > Wireless Networks.
Step 2
In the Wireless Networks window, click Add.
Step 3
Under the Advanced tab, check the Coverage Hole Detection check box.
Step 4
Check the Aironet IE check box to enable Aironet IE on the WLAN.
Step 5
Check the Diagnostic Channel check box to enable diagnostic channel on the WLAN.
Step 6
From the P2P Blocking Action drop-down list, choose the required value.

[18653465190]

1540488497lcj 发表于 2020-9-7 10:47
Step 1
Choose Configuration > Wireless > WLANs > Wireless Networks.

受教了，谢谢。

[fang1]

1540488497lcj 发表于 2020-9-7 10:47
Step 1
Choose Configuration > Wireless > WLANs > Wireless Networks.

谢谢大佬指点