本帖最后由 xy411381121 于 2018-9-21 16:04 编辑 最近公司换了一个设备巡检记录表,里面需要填写设备内存大小,但以前的采购合同里,没有写设备的内存是多少,所以打算直接登录设备查看内存,但不知道show出来的哪个才是我们需要填写的设备内存大小。
以下列设备为例:
N7K上:N7K_01# show ver
Hardware
cisco Nexus7000 C7010 (10 Slot) Chassis ("Supervisor module-1X")
Intel(R) Xeon(R) CPU with 8251588 kB of memory.
Processor Board ID JAF1727AJLJ
Device name: N7K_01
bootflash: 2048256 kB
slot0: 0 kB (expansion flash)
N7K_01# show processes memory
All processes: MemAlloc = 793137152
ASR1006上:ASR1006_01#show ver
cisco ASR1006 (RP1) processor with 1685164K/6147K bytes of memory.
Processor board ID FXS1724Q2F2
2 Gigabit Ethernet interfaces
63 Serial interfaces
4 Channelized STM-1 ports
32768K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
937983K bytes of eUSB flash at bootflash:.
39004543K bytes of SATA hard disk at harddisk:.
ASR1006_01#show processes memory
Processor Pool Total: 1725514176 Used: 332115576 Free: 1393398600
lsmpi_io Pool Total: 6295088 Used: 6294116 Free: 972
WS-C3750X-48T-S上:6A-XD-SW01#show ver
cisco WS-C3750X-48 (PowerPC405) processor (revision A0) with 262144K bytes of memory.
6A-XD-SW01#show processes memory
Processor Pool Total: 187641736 Used: 45093516 Free: 142548220
I/O Pool Total: 16777216 Used: 10648308 Free: 6128908
Driver te Pool Total: 4194304 Used: 40 Free: 4194264
感觉show ver中的才是设备内存,但为什么show processes memory中显示的总内存,跟show ver里的对不上啊?还是应该用其他命令查看设备总内存大小?