Steven2016 发表于 2019-10-23 13:32
这条命令是可选命令
ASA5515----G0/1和0/5链路聚合
#新增port-channel2
interface Port-channel2
no switchport
ip address 10.99.201.1 255.255.255.248
#端口应用
interface GigabitEthernet0/0
nameif inside1
security-level 100
channel-group 2 mode active
policy-route route-map rmap-to-Liantong
interface GigabitEthernet0/5
nameif inside1
security-level 100
channel-group 2 mode active
policy-route route-map rmap-to-Liantong
======================================================
SW3650做了堆叠---G1/0/18和G2/0/18链路聚合
#新增port-channel2
interface Port-channel2
no switchport
ip address 10.99.201.4 255.255.255.248
#端口应用
interface GigabitEthernet1/0/18
no switchport
no ip address
channel-group 2 mode active
interface GigabitEthernet2/0/18
no switchport
no ip address
channel-group 2 mode active
请问这样配置可以吗，ASA551和SW3650做链路聚合，上面的命令有问题吗
