SPA-1CHOC3-CE-ATM子卡测试报告如下:
Router#sh ver
Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVIPSERVICESK9-M), Version 12.2(33)SRE7a, RELEASE SOFTWARE (fc1)
Technical Support:
http://www.cisco.com/techsupport Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Mon 22-Oct-12 02:30 by prod_rel_team
ROM: System Bootstrap, Version 12.2(33r)SRD5, RELEASE SOFTWARE (fc1)
BOOTLDR: Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVIPSERVICESK9-M), Version 12.2(33)SRE7a, RELEASE SOFTWARE (fc1)
Router uptime is 4 minutes
Uptime for this control processor is 4 minutes
System returned to ROM by power cycle (SP by power on)
System image file is "bootdisk:c7600rsp72043-advipservicesk9-mz.122-33.SRE7a.bin"
Last reload type: Normal Reload
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to
export@cisco.com.
Cisco CISCO7609-S (M8500) processor (revision 1.0) with 917504K/65536K bytes of memory.
Processor board ID FOX1419HADH
BASEBOARD: RSP720
CPU: MPC8548_E, Version: 2.0, (0x80390020)
CORE: E500, Version: 2.0, (0x80210020)
CPU:1200MHz, CCB:400MHz, DDR:200MHz,
L1: D-cache 32 kB enabled
I-cache 32 kB enabled
Last reset from power-on
2 SIP-400 controllers (2 Channelized OC3/STM-1).
1 Virtual Ethernet interface
2 Gigabit Ethernet interfaces
2 Channelized STM-1 ports
2 Channelized STM-1 ports
3964K bytes of non-volatile configuration memory.
500472K bytes of Internal ATA PCMCIA card (Sector size 512 bytes).
Configuration register is 0x2102
Router#sh mod
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
4 0 4-subslot SPA Interface Processor-400 7600-SIP-400 SAL15******
6 2 Route Switch Processor 720 (Active) RSP720-3C-GE JAE13******
8 0 4-subslot SPA Interface Processor-400 7600-SIP-400 SAL15******
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
4 0007.7d19.f940 to 0007.7d19.f9bf 3.3 12.2(33)SRE7 12.2(33)SRE7 Ok
6 001c.584e.8d3c to 001c.584e.8d3f 5.11 12.2(33r)SRD 12.2(33)SRE7 Ok
8 0007.7d1a.00c0 to 0007.7d1a.013f 3.3 12.2(33)SRE7 12.2(33)SRE7 Ok
Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- ------- -------
4/0 1xOC3STM1 CE/ATM SPA SPA-1CHOC3-CE-ATM JAE13****** 2.0 Ok
6 Policy Feature Card 3 7600-PFC3C JAE13****** 1.2 Ok
6 C7600 MSFC4 Daughterboard 7600-MSFC4 JAE13****** 1.5 Ok
8/0 1xOC3STM1 CE/ATM SPA SPA-1CHOC3-CE-ATM JAE12****** 2.0 Ok
Mod Online Diag Status
---- -------------------
4 Pass
4/0 Not Applicable
6 Pass
8 Pass
8/0 Not Applicable
以上SPA-1CHOC3-CE-ATM测试硬件是PASS,怎么会出现Not Applicable这个问题?求各位大神帮忙指点一下,小弟在此谢过。