上传Cisco Configuration Professional Express到flash
然后开启http服务,以及配置一个level 15的用户,之后访问接口地址即可:
Step 1. Connect to your router using Telnet or SSH or through the console.
Enter the global configuration mode using the command:
Router(config)# enable
Step 2. Enable the router HTTP or HTTPS server using the following Cisco IOS Software commands:
If HTTP and HTTPS are enabled and configured to use nonstandard port numbers, you can skip this step and simply use the port number already configured.
Router(config)# ip http server
Router(config)# ip http secure-server
Router(config)# ip http authentication local
Note: HTTPS is enabled only for cryptography-enabled Cisco IOS Software images.
Step 3. Create a user with privilege level 15.
Router(config)# username
privilege 15 password 0
Note: Replace and with the username and password that you want to configure.
参考:
http://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/configuration-professional/qa_c67_494831.html
:)