取消
显示结果 
搜索替代 
您的意思是: 
cancel
14238
查看次数
0
有帮助
8
回复

ACI 模拟器怎么用?switch注册不了。

willliu12542
Spotlight
Spotlight
装好了ACI模拟器,在fabric membership页面,通过"create fabric node member"创建了三台交换机,但是一直处于pending register状态。该怎么注册?
8 条回复8

To register the switch into the fabric you have to specify some information:
Pod ID: The number of the POD the switch will be part of. Defaults to 1 and only needs to be changed in the case of a multi-pod environment.
Node ID: A unique number specifying the node. This number can be anything between 101 and 4000. It is recommended to have a numbering scheme for Spine and leaf switches. For example 101 - 199 for Spine switches, and 201 - 299 for Leaf switches. The numbers don’t have to be consecutive.
Node Name: The human readable identifier of the switch. I would recommend to include the node number in the name, but this is not required.
Role: The role of the switch. This can be:
-Spine
-Leaf
-Virtual Leaf
-Virtual Spine
-Remote Leaf
-Tier 2 Leaf (as of version 4.1)
Rack name: Optional information about the location of the switch.
As soon as you’ve registered the first leaf switch it will assigned an IP address by the APIC. After a basic configuration by the APIC it can be used to continue the discovery. The leaf switch will detect its connected spines and those will detect the leaf switches after they’ve been registered.
Refer to:https://www.mvankleij.nl/post/aci_fabric_discovery/
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Rps-Cheers | If it solves your problem, please mark as answer. Thanks !

Rockyw
Spotlight
Spotlight
楼主参考一下下面的文档
Solved: First leaf on ACI simulator is inactive
https://community.cisco.com/t5/application-centric/first-leaf-on-aci-simulator-is-inactive/td-p/3937937
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Rockyw | If it solves your problem, please mark as answer. Thanks !

18653465190
Spotlight
Spotlight
跟着楼上的大神们学习。

shlei
Cisco Employee
Cisco Employee
-模拟器的版本是什么?3.x和4.x略有不同
-模拟器中是两台leaf,一台spine,正常的流程如下:
在fabric membership中发现第一台leaf,配置leaf的name,id等信息,确认后leaf经过发现过程会变成active状态,leaf1 active后,会发现spine,同样流程注册spine后,会发现第二台leaf,再注册leaf2.

谁来带我走
Level 1
Level 1
怎末安装aci的模拟器啊,我就是单纯下载下来了,然后电脑安装虚拟机,然后导入到虚拟机里面去吗,就可以自动安装好了吗

CDB
Level 1
Level 1
好好学习:L

siyxiao
Cisco Employee
Cisco Employee
谁来带我走 发表于 2020-5-20 14:00
怎末安装aci的模拟器啊,我就是单纯下载下来了,然后电脑安装虚拟机,然后导入到虚拟机里面去吗,就可以自 ...

安装aci simulator 需要安装在UCS server上或者EXSI上, 如果使用exsi,保证你的环境能够提供至少12 Vcpu以及 24G以上memory

ghkjobs
Level 1
Level 1

我也想安装模拟器试一下,你在哪里下载的?官网吗

入门指南

使用上面的搜索栏输入关键字、短语或问题,搜索问题的答案。

我们希望您在这里的旅程尽可能顺利,因此这里有一些链接可以帮助您快速熟悉思科社区:









快捷链接