取消
显示结果 
搜索替代 
您的意思是: 
cancel
5840
查看次数
0
有帮助
8
回复

求解:瘦ap加入控制器时,ap端报错,提示国家不匹配

CanZhou293239
Level 1
Level 1
日志如下:
*Dec 7 16:42:31.451: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Dec 7 16:42:31.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.20.10 peer_port: 5246
*Dec 7 16:42:31.435: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 192.168.20.10 peer_port: 5246
*Dec 7 16:42:31.435: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.20.10
*Dec 7 16:42:31.435: %CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination.
*Dec 7 16:42:31.439: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 10 state 5.
*Dec 7 16:42:31.439: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
*Dec 7 16:42:31.439: %CAPWAP-3-ERRORLOG: Failed to process encrypted capwap packet from 192.168.20.10
., 1) 7 16:42:49.599: %CAPWAP-3-ERRORLOG: Retransmission count for packet exceeded max(UNKNOWN_MESSAGE_TYPE (5)
请问如何更改ap的国家
8 条回复8

CanZhou293239
Level 1
Level 1
型号:1602i-A-K9

wyc_chao
Spotlight
Spotlight
控制器添加AP对应的国家代码

ruichen06618
Level 1
Level 1
如果是虚拟控制器,这种情况肯定搞不定的,如果你把国家代码改成 a 其他国家的瘦ap 比如 h 将不会被发现,

HaifengLi
Cisco Employee
Cisco Employee
(wireless-vwlc-2) >config country ?

Enter the country code list (e.g. US,CA,MX) max per command = 30.

CanZhou293239
Level 1
Level 1
haifeli 发表于 2020-12-8 18:03

你好 是ap端报错,ac端的设置是对的

CanZhou293239
Level 1
Level 1
ruichen06618 发表于 2020-12-8 12:08
如果是虚拟控制器,这种情况肯定搞不定的,如果你把国家代码改成 a 其他国家的瘦ap 比如 h 将不会被 ...

不是虚拟的,就是wac

CanZhou293239 发表于 2020-12-8 21:24
你好 是ap端报错,ac端的设置是对的

这个问题需要在WLC上去修改国家代码,可以添加一个和多个国家代码,CN是中国支持的国家代码,-A应该是US的,所以可以按照Cisco大佬的操作,将US的国家代码添加。
(Controller) >config 802.11a disable network
(Controller) >config 802.11b disable network
(Controller) >config country CN,US
Changing country code could reset channel & RRM grouping configuration.
If running in RRM One-Time mode, reassign channels after this command.
Check customized APs for valid channel values after this command.
Are you sure you want to continue? (y/n) y
(Controller) >config 802.11a enable network
(Controller) >config 802.11b enable network
(Controller) >show country <<<<<<<<<该命令可以WLC目前配置的国家代码
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Rps-Cheers | If it solves your problem, please mark as answer. Thanks !

修改国家代码,修改的方法楼上的有发,-a的不是美国,美国的是-b,国家代码需要硬件设备型蛤对应关系查询可以看这个链接去查:https://www.cisco.com/c/dam/assets/prod/wireless/wireless-compliance-tool/index.html
入门指南

使用上面的搜索栏输入关键字、短语或问题,搜索问题的答案。

我们希望您在这里的旅程尽可能顺利,因此这里有一些链接可以帮助您快速熟悉思科社区:









快捷链接