接口配置了QOS,现在要改为他用,发现QOS清不了
interface GigabitEthernet7/36
no ip address
shutdown
wrr-queue queue-limit 65 15 15
wrr-queue random-detect min-threshold 1 70 100 100 100 100 100 100 100
wrr-queue random-detect min-threshold 2 70 100 100 100 100 100 100 100
wrr-queue random-detect min-threshold 3 40 40 50 50 60 60 70 70
wrr-queue random-detect max-threshold 1 100 100 100 100 100 100 100 100
wrr-queue random-detect max-threshold 2 100 100 100 100 100 100 100 100
wrr-queue random-detect max-threshold 3 70 70 80 80 90 90 100 100
wrr-queue cos-map 2 1 1 2
wrr-queue cos-map 3 5 3 4
wrr-queue cos-map 3 7 6 7
end
6509Core(config)#int g7/36
6509Core(config-if)#no wrr-queue cos-map 2 1 1 2
Warning: Can't remove cos-map because configuration is used by some other port(s) on this ASIC which has AutoQoS enabled