[2.4G HT40] - Do any images/builds can enable 2.4G HT40 mode on Cisco 2702 AP?

comic.chang1 · ‎03-24-2016

Dear all:

Do any images/builds can enable 2.4G HT40 mode on Cisco 2702 AP?

We need to test our DUT's wifi throughput in 2.4G HT40 mode with Cisco 2702AP by conductive mode,

Could you help me on this?

Thanks a lot.

yingnxu · ‎04-15-2016

您好，请问您的ap是胖ap模式还是瘦ap模式，现在是什么版本的ios？如果有具体的信息，建议到cisco开case处理。另外，这些文档功能参考：http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/108184-config-802-11n-wlc.html#topic2
https://supportforums.cisco.com/discussion/12321376/cisco-aironet-3502i-width-channel-24ghz

comic.chang1 · ‎04-15-2016

本帖最后由 comic.chang1 于 2016-4-15 17:23 编辑

yingnxu_cisco 发表于 2016-4-15 16:39
您好，请问您的ap是胖ap模式还是瘦ap模式，现在是什么版本的ios？如果有具体的信息，建议到cisco开case处理 ...

Thanks Yingnxu.
Autonomous Cisco 2702 AP: ap3g2-k9w7-tar.153-3.JC
日前已有發case詢問,但目前Cisco原廠回覆 CiscoAP 都無法設定成2.4G HT40.