现有一台思科路由器查看cpu显示 TTY Background 进程占用60%,按照网上说的停止logging synchronous没有变化。请问该如何解决?按照官网的说法需要重启路由器,可这是台核心路由器真的不能随便重启啊。
网上的说法为使用下面命令:
Router(config)#line con 0
Router(config-line)#no logging synchronous
软件版本
Cisco Internetwork Operating System Software
IOS (tm) GS Software (C12KPRP-P-M), Version 12.0(32)SY4, RELEASE SOFTWARE (fc1)
Technical Support:
http://www.cisco.com/techsupportCopyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Mon 20-Aug-07 18:23 by leccese
Image text-base: 0x00010000, data-base: 0x053A2000
ROM: System Bootstrap, Version 12.0(20070523:115224) [knawani-CSCsi59917_32_sy 1.19dev(0.1)] DEVELOPMENT SOFTWARE
BOOTLDR: GS Software (C12KPRP-P-M), Version 12.0(32)SY4, RELEASE SOFTWARE (fc1)
61000000cr12000-1n uptime is 2 years, 30 weeks, 3 days, 15 hours, 53 minutes
Uptime for this control processor is 2 years, 30 weeks, 3 days, 15 hours, 53 minutes
System returned to ROM by reload at 03:47:55 UTC Tue Aug 26 2014
System restarted at 20:09:06 UTC Tue Aug 26 2014
System image file is "disk0:c12kprp-p-mz.120-32.SY4.bin"
cisco 12410/PRP (MPC7455) processor (revision 0x00) with 524288K bytes of memory.
MPC7455 CPU at 665Mhz, Rev 2.1, 256KB L2, 2048KB L3 Cache
Last reset from sw reset
2 Route Processor Cards
2 Clock Scheduler Cards
5 Switch Fabric Cards
1 ISE 5G SPA Interface Card (12000-SIP-501)
2 Ethernet/IEEE 802.3 interface(s)
5 GigabitEthernet/IEEE 802.3 interface(s)
63 Serial network interface(s)
2043K bytes of non-volatile configuration memory.