请选择 进入手机版 | 继续访问电脑版

设为首页 收藏本站
思科服务支持社区 点击关注
思科服务支持社区

  
 找回密码
 立即注册

扫一扫,访问微社区

搜索
热搜: 邮件服务器
查看: 486|回复: 2

ASA 5505升级IOS问题

[复制链接]
发表于 2017-5-10 14:28:18 | 显示全部楼层 |阅读模式
5可用金钱
公司有个ASA 5505要借给客户,让我看下是不是好的顺便把配置清了,我拿到手一看 CF卡里面没有IOS,开机报CISCO SYSTEMS Embedded BIOS Version 1.0(12)13 08/28/08 15:50:37.45

Low Memory: 632 KB
High Memory: 507 MB
PCI Device Table.
Bus Dev Func VendID DevID Class              Irq
00  01  00   1022   2080  Host Bridge        
00  01  02   1022   2082  Chipset En/Decrypt 11
00  0C  00   1148   4320  Ethernet           11
00  0D  00   177D   0003  Network En/Decrypt 10
00  0F  00   1022   2090  ISA Bridge         
00  0F  02   1022   2092  IDE Controller     
00  0F  03   1022   2093  Audio              10
00  0F  04   1022   2094  Serial Bus         9
00  0F  05   1022   2095  Serial Bus         9

Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON

Cisco Systems ROMMON Version (1.0(12)13) #0: Thu Aug 28 15:55:27 PDT 2008

Platform ASA5505

Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.

Launching BootLoader...
Default configuration file contains 1 entry.

Searching / for images to boot.

No images in /
Error 15: File not found

unable to boot an image


Default configuration file contains 1 entry.

Searching / for images to boot.

No images in /
Error 15: File not found

unable to boot an image


Failsafe booting engaged.
Default configuration file contains 1 entry.

Searching / for images to boot.

No images in /
Error 15: File not found

unable to boot an image

开TFTP 灌IOS,
rommon #3> tftp
ROMMON Variable Settings:
  ADDRESS=192.168.1.3
  SERVER=192.168.1.1
  GATEWAY=192.168.1.1
  PORT=Ethernet0/0
  VLAN=untagged
  IMAGE=asa825-k8.bin
  CONFIG=
  LINKTIMEOUT=20
  PKTTIMEOUT=4
  RETRY=20

tftp asa825-k8.bin@192.168.1.1 via 192.168.1.1
!!!!!!!!!!!!!!!!!!!!!!
Received 15390720 bytes

Launching TFTP Image...

Cisco Security Appliance admin loader (3.0) #0: Fri May 20 16:01:46 MDT 2011
Platform ASA5505

Loading...
àdosfsck 2.11, 12 Mar 2005, FAT32, LFN
Currently, only 1 or 2 FATs are supported, not 255.

dosfsck(/dev/hda1) returned 1
mount: mounting /dev/hda1 on /mnt/disk0 failed: Invalid argument
mount: mounting /dev/hda1 on /mnt/disk0 failed: Invalid argument

Processor memory 383688704, Reserved memory: 62914560 (DSOs: 0 + kernel: 62914560)

Total SSMs found: 0

Total NICs found: 10
88E6095 rev 2 Gigabit Ethernet @ index 09 MAC: 0000.0003.0002
88E6095 rev 2 Ethernet @ index 08 MAC: e4d3.f12f.837b
88E6095 rev 2 Ethernet @ index 07 MAC: e4d3.f12f.837a
88E6095 rev 2 Ethernet @ index 06 MAC: e4d3.f12f.8379
88E6095 rev 2 Ethernet @ index 05 MAC: e4d3.f12f.8378
88E6095 rev 2 Ethernet @ index 04 MAC: e4d3.f12f.8377
88E6095 rev 2 Ethernet @ index 03 MAC: e4d3.f12f.8376
88E6095 rev 2 Ethernet @ index 02 MAC: e4d3.f12f.8375
88E6095 rev 2 Ethernet @ index 01 MAC: e4d3.f12f.8374
y88acs06 rev16 Gigabit Ethernet @ index 00 MAC: e4d3.f12f.837c

INFO: Unable to read firewall mode from flash
       Writing default firewall mode (single) to flash
Running Activation Key: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000

This activation key is not valid.
Use default settings only

Encryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0)
                             Boot microcode   : CN1000-MC-BOOT-2.00
                             SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
                             IPSec microcode  : CNlite-MC-IPSECm-MAIN-2.05
i2c_write_byte_w_suspend() error, slot = 0x0, device = 0x40, address = 26 byte count = 1. Reason: I2C_UNPOPULATED_ERROR

Cisco Adaptive Security Appliance Software Version 8.2(5)

  ****************************** Warning *******************************
  This product contains cryptographic features and is
  subject to United States and local country laws
  governing, import, export, transfer, and use.
  Delivery of Cisco cryptographic products does not
  imply third-party authority to import, export,
  distribute, or use encryption. Importers, exporters,
  distributors and users are responsible for compliance
  with U.S. and local country laws. By using this
  product you agree to comply with applicable laws and
  regulations. If you are unable to comply with U.S.
  and local laws, return the enclosed items immediately.

  A summary of U.S. laws governing Cisco cryptographic
  products may be found at:
  http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

  If you require further assistance please contact us by
  sending email to export@cisco.com.
  ******************************* Warning *******************************

Copyright (c) 1996-2011 by Cisco Systems, Inc.

                Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

                Cisco Systems, Inc.
                170 West Tasman Drive
                San Jose, California 95134-1706



从TFTP灌的IOS解压安装到这边就卡住没反应了。试了好几个版本 官网最高的924  然后 845 825都试过了,都是一样。


然后发现有个坏的5505,把CF卡拆下来装这个机子上启动,


CISCO SYSTEMS
Embedded BIOS Version 1.0(12)13 08/28/08 15:50:37.45

Low Memory: 632 KB
High Memory: 507 MB
PCI Device Table.
Bus Dev Func VendID DevID Class              Irq
00  01  00   1022   2080  Host Bridge        
00  01  02   1022   2082  Chipset En/Decrypt 11
00  0C  00   1148   4320  Ethernet           11
00  0D  00   177D   0003  Network En/Decrypt 10
00  0F  00   1022   2090  ISA Bridge         
00  0F  02   1022   2092  IDE Controller     
00  0F  03   1022   2093  Audio              10
00  0F  04   1022   2094  Serial Bus         9
00  0F  05   1022   2095  Serial Bus         9

Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON

Cisco Systems ROMMON Version (1.0(12)13) #0: Thu Aug 28 15:55:27 PDT 2008

Platform ASA5505

Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.
Boot interrupted.                              

Ethernet0/0
MAC Address: e4d3.f12f.837c
Link is UP

Use ? for help.
rommon #0> reload



Rebooting....


CISCO SYSTEMS
Embedded BIOS Version 1.0(12)13 08/28/08 15:50:37.45

Low Memory: 632 KB
High Memory: 507 MB
PCI Device Table.
Bus Dev Func VendID DevID Class              Irq
00  01  00   1022   2080  Host Bridge        
00  01  02   1022   2082  Chipset En/Decrypt 11
00  0C  00   1148   4320  Ethernet           11
00  0D  00   177D   0003  Network En/Decrypt 10
00  0F  00   1022   2090  ISA Bridge         
00  0F  02   1022   2092  IDE Controller     
00  0F  03   1022   2093  Audio              10
00  0F  04   1022   2094  Serial Bus         9
00  0F  05   1022   2095  Serial Bus         9

Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON

Cisco Systems ROMMON Version (1.0(12)13) #0: Thu Aug 28 15:55:27 PDT 2008

Platform ASA5505

Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.

Launching BootLoader...
Default configuration file contains 1 entry.

Searching / for images to boot.

Loading /asa804-k8.bin... Booting...
Loading...
à
Processor memory 451465216, Reserved memory: 41943040 (DSOs: 0 + kernel: 41943040)
Guest RAM start: 0xc5000080
Guest RAM   end: 0xdd400000
Guest RAM   brk: 0xc5001000

IO memory 39403520 bytes
IO memory start: 0xc27f9000
IO memory   end: 0xc4d8d000

Total SSMs found: 0

Total NICs found: 10
88E6095 rev 2 Gigabit Ethernet @ index 09 MAC: 0000.0003.0002
88E6095 rev 2 Ethernet @ index 08 MAC: e4d3.f12f.837b
88E6095 rev 2 Ethernet @ index 07 MAC: e4d3.f12f.837a
88E6095 rev 2 Ethernet @ index 06 MAC: e4d3.f12f.8379
88E6095 rev 2 Ethernet @ index 05 MAC: e4d3.f12f.8378
88E6095 rev 2 Ethernet @ index 04 MAC: e4d3.f12f.8377
88E6095 rev 2 Ethernet @ index 03 MAC: e4d3.f12f.8376
88E6095 rev 2 Ethernet @ index 02 MAC: e4d3.f12f.8375
88E6095 rev 2 Ethernet @ index 01 MAC: e4d3.f12f.8374
y88acs06 rev16 Gigabit Ethernet @ index 00 MAC: e4d3.f12f.837c
imb_upgrade_thread: IMB in slot 0 is version 1.8
imb_upgrade_thread: IMB in slot 0 is being upgraded to 1.7
i2c_write_byte_w_suspend() error, slot = 0x0, device = 0x40, address = 26 byte count = 1. Reason: I2C_UNPOPULATED_ERROR
IMBFS: Updating the IMB to v1.7. Please wait...
IMBFS: The IMB software was changed to v1.7.
Running Activation Key: 0x3a1f045e 0x50248de4 0x4ce12908 0x8264d840 0x8a07efb1

This activation key is not valid, use default settings only

Encryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0)
                             Boot microcode   : CN1000-MC-BOOT-2.00
                             SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
                             IPSec microcode  : CNlite-MC-IPSECm-MAIN-2.05

Cisco Adaptive Security Appliance Software Version 8.0(4)

  ****************************** Warning *******************************
  This product contains cryptographic features and is
  subject to United States and local country laws
  governing, import, export, transfer, and use.
  Delivery of Cisco cryptographic products does not
  imply third-party authority to import, export,
  distribute, or use encryption. Importers, exporters,
  distributors and users are responsible for compliance
  with U.S. and local country laws. By using this
  product you agree to comply with applicable laws and
  regulations. If you are unable to comply with U.S.
  and local laws, return the enclosed items immediately.

  A summary of U.S. laws governing Cisco cryptographic
  products may be found at:
  http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

  If you require further assistance please contact us by
  sending email to export@cisco.com.
  ******************************* Warning *******************************

Copyright (c) 1996-2008 by Cisco Systems, Inc.

                Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

                Cisco Systems, Inc.
                170 West Tasman Drive
                San Jose, California 95134-1706




结果还是一样卡在这,请各位帮忙看看是什么问题

最佳答案

查看完整内容

i2c_write_byte_w_suspend() error, slot = 0x0, device = 0x40, address = 26 byte count = 1. Reason: I2C_UNPOPULATED_ERROR 有芯片报错了,硬件故障,不是IOS问题

点评

感谢您的提问!稍后会有小伙伴为您解答的!  发表于 2017-5-10 15:07
  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分0 (0 评价)
发表于 2017-5-10 14:28:19 | 显示全部楼层
i2c_write_byte_w_suspend() error, slot = 0x0, device = 0x40, address = 26 byte count = 1. Reason: I2C_UNPOPULATED_ERROR

有芯片报错了,硬件故障,不是IOS问题
  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分0 (0 评价)
 楼主| 发表于 2017-5-12 14:10:45 | 显示全部楼层
pxhen 发表于 2017-5-12 11:21
i2c_write_byte_w_suspend() error, slot = 0x0, device = 0x40, address = 26 byte count = 1. Reason: I2 ...

哦,好的 谢谢了,我查下服务开case试试
  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分0 (0 评价)
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

Archiver | 思科服务支持社区  

GMT+8, 2017-11-24 09:36 , Processed in 0.106351 second(s), 31 queries .

京ICP备09041801号-187

版权所有 :copyright:1992-2019 思科系统  重要声明 | 保密声明 | 隐私权政策 | 商标 |

快速回复 返回顶部 返回列表