请选择 进入手机版 | 继续访问电脑版

设为首页 收藏本站
思科服务支持社区 点击关注
思科服务支持社区

  
 找回密码
 立即注册

扫一扫,访问微社区

搜索
热搜: 邮件服务器
查看: 191|回复: 0

#分享达人# AP IOS 命名

[复制链接]
发表于 2017-9-8 17:02:57 | 显示全部楼层 |阅读模式
现在AP1600  2600 3600   1700 2700 3700等IOS 命名有自己的一套规则,大家是否清楚IOS命名规则?如果我们要升级IOS,拿到一个IOS,能付看IOS名字知道是什么硬件使用的呢? 这里学习一下大家就清晰了(没有特别全,以后补全)!
All Cisco Aironet wireless access points and bridges currently being shipped run IOS.  The only exception is the OEAP602.
Note:- Some older Cisco access points did not run IOS, such as the Aironet 340 which ran only VxWorks, and the 1000 series lightweight APs.  Access Point IOS is distributed as a tar file. These tar files can be downloaded from cisco.com SDS; lightweight IOS images (k9w8) are also bundled in the WLC software images (.aes.)  The IOS image names include the following components:-

platform-featureset-tar.version.tar
  • platform- the access point hardware model or family supported by the image
    • ap1g1 - 700 series (702w beginning with 15.2(4)JB5)
    • ap1g2 - 1600 series
    • ap1g3 - 1530 series
    • ap3g2 - 3700/3600/2700/2600/1700 series
    • ap3g1 - 3500/1260 series
    • ap802 - AP embedded in 819, 812, 886VA-W/887VA-W, and C88x routers
    • ap801 - AP embedded in 861W, 891W, 1911W routers and most 88xW routers
    • apw5100 - Rockwell Stratix 5100 WAPAK9, WAPCK9, WAPEK9, WAPZK9
    • c1570 - 1570 series outdoor APs
    • c1520 - 1550 and 1520 series mesh APs
    • c1410 - BR1410
    • c1310 - BR1310
    • c1250 - 1250 series APs
    • c1240 - 1240 series APs
    • c1200 - 1200 series (1200/1210/1220/1230)
    • c1140 - 1140 and 1040 series APs
    • c1130 - 1130 series APs
    • c1100 - 1100 series APs (i.e. the AP1121)
    • c520 - 521 AP
    • c350 - 350 series APs

  • featureset- the set of software features supported by the image - one of:      
    • k9w7 - autonomous (or "site survey") IOS
    • k9w8 - full lightweight IOS (this is what is bundled in the WLC .aes image, and is factory installed on "mesh" APs)
    • rcvk9w8 - lightweight recovery image - this is factory installed on lightweight APs, unless a "mesh" image is specified; it lacks radio firmware
    • boot - bootloader image (not IOS) - normally installed by manufacturing and not updated in the field
  • version- the IOS version      

Example:
c1240-k9w7-tar.124-25d.JA1.tar
  • Platform: c1240: 1240 series AP
  • Featureset: k9w7: autonomous IOS
  • Version: 124-25d.JA1: 12.4(25d)JA1

As AP IOS is always distributed as a tar file, the AP cannot directly execute such a file (thus, if you were to copy c1240-k9w7-tar.124-25d.JA1.tar directly onto AP flash, and then try to boot it, this could not work.)  The tar file contains, in addition to the IOS image proper, the radio firmware files, the HTML GUI files (if present), and various other files.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分0 (0 评价)
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

Archiver | 思科服务支持社区  

GMT+8, 2017-11-25 08:07 , Processed in 0.073140 second(s), 24 queries .

京ICP备09041801号-187

版权所有 :copyright:1992-2019 思科系统  重要声明 | 保密声明 | 隐私权政策 | 商标 |

快速回复 返回顶部 返回列表