请选择 进入手机版 | 继续访问电脑版

设为首页 收藏本站
思科服务支持社区 点击关注
思科服务支持社区

  
 找回密码
 立即注册

扫一扫,访问微社区

搜索
热搜: 邮件服务器
查看: 363|回复: 3

cisco 6509 部分端口ping不通

[复制链接]
发表于 2017-9-24 00:31:14 | 显示全部楼层 |阅读模式
0可用金钱
------------------ show version ------------------
Cisco IOS Software, s2t54 Software (s2t54-ADVIPSERVICESK9-M), Version 15.1(2)SY, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Wed 04-Sep-13 12:37 by prod_rel_team
ROM: System Bootstrap, Version 12.2(50r)SYS3, RELEASE SOFTWARE (fc1)
GDDS-VS6509 uptime is 3 years, 3 days, 15 hours, 17 minutes
Uptime for this control processor is 1 year, 14 weeks, 6 days, 4 hours, 45 minutes
System returned to ROM by Stateful Switchover at 13:24:09 UTC Mon Jun 6 2016
System restarted at 21:26:25 UTC Mon Jun 6 2016
System image file is "bootdisk:s2t54-advipservicesk9-mz.SPA.151-2.SY.bin"
Last reload reason: unknown reload cause - reason ptr 0x17, PC 0x527F7E0, address 0x527F7E0

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
interface TenGigabitEthernet2/6/3
description bad port
no switchport
no ip address
TenGigabitEthernet2/6/3 is down, line protocol is down (notconnect)
  Hardware is C6k 10000Mb 802.3, address is b4e9.b0c8.dd00 (bia b4e9.b0c8.dd00)
  Description: bad port
  MTU 1500 bytes, BW 10000000 Kbit, DLY 10 usec,
     reliability 255/255, txload 0/255, rxload 0/255
  Encapsulation ARPA, loopback not set
  Keepalive set (10 sec)
  Full-duplex, 10Gb/s
  input flow-control is off, output flow-control is off
  Clock mode is auto
  ARP type: ARPA, ARP Timeout 04:00:00
  Last input 00:04:26, output never, output hang never
  Last clearing of "show interface" counters 00:13:46
  Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 3766602026
  Queueing strategy: fifo
  Output queue: 0/40 (size/max)
  5 minute input rate 0 bits/sec, 0 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
  L2 Switched: ucast: 0 pkt, 0 bytes - mcast: 0 pkt, 0 bytes
  L3 in Switched: ucast: 0 pkt, 0 bytes - mcast: 0 pkt, 0 bytes
  L3 out Switched: ucast: 0 pkt, 0 bytes - mcast: 0 pkt, 0 bytes
     48471 packets input, 4959812 bytes, 0 no buffer
     Received 48469 broadcasts (0 IP multicasts)
     0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 2 frame, 0 overrun, 0 ignored
     0 watchdog, 0 multicast, 2797300 pause input
     0 input packets with dribble condition detected
     1028744917844 packets output, 697102243319577 bytes, 0 underruns
     0 output errors, 0 collisions, 0 interface resets
     0 babbles, 0 late collision, 0 deferred
     0 lost carrier, 0 no carrier, 0 PAUSE output
     0 output buffer failures, 0 output buffers swapped out



  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分1 (1 评价)
发表于 2017-10-9 18:54:04 | 显示全部楼层
(notconnect   是表示物理down,你要测试下 线缆跟PC 测试下看看,如果一直都是down的,有模块看看更换个好的模块试试看。 如果还是down,估计是端口坏了的说
  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分2 (1 评价)
发表于 2017-11-2 10:16:38 | 显示全部楼层
TenGigabitEthernet2/6/3 is down, line protocol is down (notconnect)
根据端口的状态显示二层连接有问题,
1.请检查你的跳线是否有问题,可以把此跳线连接到其他的空接口,查看端口是否可以up,从而可以判断跳线是否有问题。
2可以把此接口的光模块和其他接口的光模块互换,判断此模块和端口是否有问题
通过上面的测试基本可以确认问题的原因
  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分2 (1 评价)
发表于 2017-11-3 09:09:27 | 显示全部楼层
PING不通是有很多原因,从贴的配置,
只能看到描述是bad
description bad port
并且没有连接,二层协议down
TenGigabitEthernet2/6/3 is down, line protocol is down (notconnect)
还是个三层接口,没有配置IP
no switchport
no ip address。

可以给接口配个地址,直连个设备看下能不能ping。
  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分2 (1 评价)
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

Archiver | 思科服务支持社区  

GMT+8, 2017-12-19 06:14 , Processed in 0.083424 second(s), 35 queries .

京ICP备09041801号-187

版权所有 :copyright:1992-2019 思科系统  重要声明 | 保密声明 | 隐私权政策 | 商标 |

快速回复 返回顶部 返回列表