取消
显示结果 
搜索替代 
您的意思是: 
cancel
5419
查看次数
10
有帮助
4
回复

cisco 6509-E 部分端口业务不通

小斌
Level 1
Level 1
------------------ show version ------------------
Cisco IOS Software, s2t54 Software (s2t54-ADVIPSERVICESK9-M), Version 15.1(2)SY, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Wed 04-Sep-13 12:37 by prod_rel_team
ROM: System Bootstrap, Version 12.2(50r)SYS3, RELEASE SOFTWARE (fc1)
GDDS-VS6509 uptime is 3 years, 3 days, 15 hours, 17 minutes
Uptime for this control processor is 1 year, 14 weeks, 6 days, 4 hours, 45 minutes
System returned to ROM by Stateful Switchover at 13:24:09 UTC Mon Jun 6 2016
System restarted at 21:26:25 UTC Mon Jun 6 2016
System image file is "bootdisk:s2t54-advipservicesk9-mz.SPA.151-2.SY.bin"
Last reload reason: unknown reload cause - reason ptr 0x17, PC 0x527F7E0, address 0x527F7E0
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
TenGigabitEthernet2/6/3 is down, line protocol is down (notconnect)
Hardware is C6k 10000Mb 802.3, address is b4e9.b0c8.dd00 (bia b4e9.b0c8.dd00)
Description: bad port
MTU 1500 bytes, BW 10000000 Kbit, DLY 10 usec,
reliability 255/255, txload 0/255, rxload 0/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 10Gb/s
input flow-control is off, output flow-control is off
Clock mode is auto
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:04:26, output never, output hang never
Last clearing of "show interface" counters 00:13:46
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 3766602026
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
L2 Switched: ucast: 0 pkt, 0 bytes - mcast: 0 pkt, 0 bytes
L3 in Switched: ucast: 0 pkt, 0 bytes - mcast: 0 pkt, 0 bytes
L3 out Switched: ucast: 0 pkt, 0 bytes - mcast: 0 pkt, 0 bytes
48471 packets input, 4959812 bytes, 0 no buffer
Received 48469 broadcasts (0 IP multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 2 frame, 0 overrun, 0 ignored
0 watchdog, 0 multicast, 2797300 pause input
0 input packets with dribble condition detected
1028744917844 packets output, 697102243319577 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 PAUSE output
0 output buffer failures, 0 output buffers swapped out
TenGigabitEthernet2/6/4 is administratively down, line protocol is down (disabled)
Hardware is C6k 10000Mb 802.3, address is b4e9.b0c8.dd00 (bia b4e9.b0c8.dd00)
Description: bad port
MTU 1500 bytes, BW 10000000 Kbit, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 10Gb/s
input flow-control is off, output flow-control is off
Clock mode is auto
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output never, output hang never
Last clearing of "show interface" counters 00:13:44
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 2073921457
Queueing strategy: fifo
Output queue: 0/40 (size/max)
30 second input rate 0 bits/sec, 0 packets/sec
30 second output rate 0 bits/sec, 0 packets/sec
L2 Switched: ucast: 0 pkt, 0 bytes - mcast: 0 pkt, 0 bytes
L3 in Switched: ucast: 0 pkt, 0 bytes - mcast: 0 pkt, 0 bytes
L3 out Switched: ucast: 0 pkt, 0 bytes - mcast: 0 pkt, 0 bytes
10420 packets input, 915604 bytes, 0 no buffer
Received 10398 broadcasts (0 IP multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 0 multicast, 9633874 pause input
0 input packets with dribble condition detected
2321046322542 packets output, 1169801400983745 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 PAUSE output
0 output buffer failures, 0 output buffers swapped out
4 条回复4

fortune
VIP Alumni
VIP Alumni
你的一个是notconnect ,另外一个是administratively down, administrator down 是手动关闭, 而notc 是表示没接东西,如果你接了,但是现实这个,你就要用一下替换法,替换一下对方连接的设备,端口,光纤来测试是不是端口问题

RenxChen
Spotlight
Spotlight
从物理上GigabitEthernet2/6/3,GigabitEthernet2/6/4如果是接入光纤,把多模光纤模块替换个试试。
从协议上看,两个接口上会不会配置错了什么导致的问题?,你可以show run | s GigabitEthernet2/6/3;show run | s GigabitEthernet2/6/4. 帖个配置看下。
也可以将原有配置保存,使用default interface 把接口配置重置后,再贴新的配置试试。
运行了这么多年的设备,突然出现的接口问题,可能是接口问题的。

13nash
Level 8
Level 8
手动关闭了, no shutdown

stoneyeye
Level 1
Level 1
模块坏了!
入门指南

使用上面的搜索栏输入关键字、短语或问题,搜索问题的答案。

我们希望您在这里的旅程尽可能顺利,因此这里有一些链接可以帮助您快速熟悉思科社区:









快捷链接