请选择 进入手机版 | 继续访问电脑版

设为首页 收藏本站
思科服务支持社区 点击关注
思科服务支持社区

  
 找回密码
 立即注册

扫一扫,访问微社区

搜索
热搜: 邮件服务器
查看: 248|回复: 5

WLC2504升级8.2及以上系统后不能启动

[复制链接]
发表于 2017-9-26 12:08:35 | 显示全部楼层 |阅读模式
10可用金钱
各位大神, 昨天升级一台WLC2504的控制器系统, 初始版本是7.6.100的版本, 我升级到8.0.110启动正常的, 是从新版本8.0.110启动的, 然后我再升级到8.2.141启动后就不能从8.2.141启动, 控制器会在提示加载完8.2.141系统后重新从8.0.110启动,然后进入系统后还是8.0.110。 然后我再次升级系统更换了8.3.122的版本, 这次升级完提示重启后在加载完8.3.122的版本后就会停留在lunching这里不会再有任何进展了。 然后我用论坛上提供的RTOS把系统恢复到7.0.250后(http://bbs.csc-china.com.cn/foru ... hread&tid=40460 (AS_5500_cavium_main-7.0.250.0) and RTO file corrupted (AS_5500_RTOS-7.0.250.0).), 再次尝试升级7.6.110再8.0.110再到8.2以上系统然后还是一样的效果8.2及以上系统都不能启动。 所有升级AES软件我都用md5校验和官网提供的md5一致,文件是没问题的。
和下面这个帖子里遇到的状况是一样的。
https://supportforums.cisco.com/ ... 3-120-0/m-p/2985878

下面是升级日志:


(Cisco Controller) >show sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 8.0.110.0   #### 从7.6.100升级到8.0.110启动正常的
Bootloader Version............................... 1.0.20             #### FUS也是1.9 排除 CSCuu46671  这个bug
Field Recovery Image Version..................... 7.6.101.1
Firmware Version................................. PIC 20.0


Build Type....................................... DATA + WPS
System Name...................................... Cisco_be:40:64
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1279
IP Address....................................... 192.168.1.31
IPv6 Address..................................... ::
Last Reset....................................... Software reset
System Up Time................................... 0 days 0 hrs 22 mins 13 secs
System Timezone Location.........................
System Stats Realtime Interval................... 5
System Stats Normal Interval..................... 180

--More-- or (q)uit

Configured Country............................... CN  - China
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +44 C
External Temperature............................. +47 C
Fan Status....................................... 4200 rpm

State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 1
Number of Active Clients......................... 0

Burned-in MAC Address............................ 68:9C:E2:BE:40:60
Maximum number of APs supported.................. 75
System Nas-Id.................................... Cisco_be:40:64
WLC MIC Certificate Types........................ SHA1/SHA2

(Cisco Controller) >Restarting system.


WLCNG Boot Loader Version 1.0.20 (Built on Jan 14 2014 at 11:40:45 by cisco)
Board Revision 0.0 (SN: Type: AIR-CT2504-K9) (P)

Verifying boot loader integrity... OK.

OCTEON CN5230C-SCP pass 2.0, Core clock: 750 MHz, DDR clock: 330 MHz (660 Mhz data rate)
CPU Cores:  4
DRAM:  1024 MB
Flash: 32 MB
Clearing DRAM........ done
Network: octeth0', octeth1, octeth2, octeth3
  ' - Active interface
  E - Environment MAC address override
CF Bus 0 (IDE): OK
IDE device 0:
- Model: 1GB CompactFlash Card Firm: CF B61FK Ser#: @771100001A1Yq7EMCKR
- Type: Hard Disk
- Capacity: 977.4 MB = 0.9 GB (2001888 x 512)


Press <ESC> now to access the Boot Menu...


Loading primary image (8.3.122.0)    #####从8.0.110升级到8.3.122 重启后提示加载了系统, 但没有从这个版本启动起来
100%

35904881 bytes read
Launching...
Launching images...
init started: BusyBox v1.6.0 (2010-05-13 17:50:10 EDT) multi-call binary
starting pid 688, tty '': '/etc/init.d/rcS'
Detecting Hardware ...
Installing ether-pow driver - 0x6008
starting pid 873, tty '/dev/ttyS0': '/usr/bin/gettyOrMwar'
Setting up ZVM
Exporting LD_LIBRARY_PATH
Decompressing...
Validating...... OK

Cryptographic library self-test....passed!
XML config selected
Validating XML configuration
octeon_device_init: found 1 DPs
/dev/fpga: No such device or address
readCPUConfigData: cardid 0x6060001
Cisco is a trademark of Cisco Systems, Inc.
Software Copyright Cisco Systems, Inc. All rights reserved.

Cisco AireOS Version 8.0.110.0    ####  系统并没有从8.3.122启动, 而是从备用系统8.0.110启动了,  这里也没有提示任何错误信息
Firmware Version PIC 20.0


Initializing OS Services: ok
Initializing Serial Services: ok
Initializing Network Services: ok
Initializing Licensing Services:
License daemon start initialization.....
ok

License daemon running.....
Starting Statistics Service: ok
Starting ARP Services: ok
Starting Trap Manager: ok
Starting Network Interface Management Services: ok
Starting System Services: ok
Starting FIPS Features: ok : Not enabled
Starting Fastpath Hardware Acceleration: ok
Starting Fastpath Console redirect : ok
Starting Fastpath DP Heartbeat : ok
Fastpath CPU0.00: Starting Fastpath Application. SDK-1.8.0, build 269. Flags-[DUTY CYCLE] : ok
Fastpath CPU0.00: Initializing last packet received queue. Num of cores(2)
Fastpath CPU0.00: Init MBUF size: 1856, Subsequent MBUF size: 2040
Fastpath CPU0.00: Core 0 Initialization: ok
Fastpath CPU0.00: Initializing Timer...
Fastpath CPU0.00: Initializing Timer...done.
Fastpath CPU0.00: Initializing Timer...
Fastpath CPU0.00: Initializing NBAR AGING Timer...done.
Fastpath CPU0.01: Core 1 Initialization: ok
Starting Switching Services: ok
Starting QoS Services: ok
Starting Policy Manager: ok
Starting Data Transport Link Layer: ok
Starting Access Control List Services: ok
Starting System Interfaces: ok
Starting Client Troubleshooting Service: ok
Starting Certificate Database: ok
Starting VPN Services: ok
Starting Management Frame Protection: ok
Starting DNS Services: ok
Starting Licensing Services: ok
Starting Redundancy: ok
Starting LWAPP: ok
Starting CAPWAP: ok
Starting LOCP: ok
Starting Security Services: ok
Starting Policy Manager: ok
Starting Authentication Engine: ok
Starting Mobility Management: ok
Starting Capwap Ping Component: ok
Starting AVC Services: ok
Starting Virtual AP Services: ok
Starting AireWave Director: ok
Starting Network Time Services: ok
Starting Cisco Discovery Protocol: ok
Starting Broadcast Services: ok
Starting Logging Services: ok
Starting DHCP Server: ok
Starting IDS Signature Manager: ok
Starting RFID Tag Tracking: ok
Starting RF Profiles: ok
Starting Power Supply and Fan Status Monitoring Service: ok
Starting Mesh Services:  ok
Starting TSM: ok
Starting CIDS Services: ok
Starting Ethernet-over-IP: ok
Starting DTLS server:  enabled in CAPWAP
Starting CleanAir: ok
Starting WIPS: ok
Starting SSHPM LSC PROV LIST: ok
Starting RRC Services: ok
Starting SXP Services: ok
Starting Alarm Services: ok
Starting FMC HS: ok
Starting IPv6 Services: ok
Starting Config Sync Manager : ok
Starting Hotspot Services: ok
Starting Portal Server Services: ok
Starting mDNS Services: ok
Starting Management Services:
   Web Server:    CLI:    Secure Web: ok

(Cisco Controller)

Enter User Name (or 'Recover-Config' this one-time only to reset configuration to factory defaults)

User:  cisco
Password:*********
(Cisco Controller) >show sysinfo

Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 8.0.110.0           ### 启动后显示的版本
Bootloader Version............................... 1.0.20
Field Recovery Image Version..................... 7.6.101.1
Firmware Version................................. PIC 20.0


Build Type....................................... DATA + WPS

System Name...................................... Cisco_be:40:64
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1279
IP Address....................................... 192.168.1.31
IPv6 Address..................................... ::
Last Reset....................................... Software reset
System Up Time................................... 0 days 0 hrs 2 mins 34 secs
System Timezone Location.........................
System Stats Realtime Interval................... 5
System Stats Normal Interval..................... 180


Configured Country............................... CN  - China
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +43 C
External Temperature............................. +46 C
Fan Status....................................... 4200 rpm

State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 1
Number of Active Clients......................... 0

Burned-in MAC Address............................ 68:9C:E2:BE:40:60
Maximum number of APs supported.................. 75
System Nas-Id.................................... Cisco_be:40:64
WLC MIC Certificate Types........................ SHA1/SHA2


(Cisco Controller) >
(Cisco Controller) >show boot
Primary Boot Image............................... 8.3.122.0 (default)       #### 启动项里显示的8.3.122为主启动设备,  这个启动选项我切换过几次都是不能从8.3启动。
Backup Boot Image................................ 8.0.110.0 (active)




有没有人遇到过这种情况呢?  有没什么办法可以尝试呢?



  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分0 (0 评价)
发表于 2017-9-27 16:40:14 | 显示全部楼层
本帖最后由 duxiulei 于 2017-9-27 16:41 编辑

这不是单纯技术问题,联系供货商或者开CASE吧
  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分0 (0 评价)
发表于 2017-9-27 17:33:59 | 显示全部楼层
看了升级8.3.122的文档,过程也没有发现什么问题。
要不试试从7.6直接升级8.3?

现在我公司的WLC还是7.6,准备等8.4稳定之后,直接升级到8.4
  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分0 (0 评价)
 楼主| 发表于 2017-9-28 12:26:03 | 显示全部楼层
duxiulei 发表于 2017-9-27 16:40
这不是单纯技术问题,联系供货商或者开CASE吧

谢谢, 主要是设备过保了, 开不了case了
  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分0 (0 评价)
 楼主| 发表于 2017-9-28 12:27:09 | 显示全部楼层
maguanghua2013 发表于 2017-9-27 17:33
看了升级8.3.122的文档,过程也没有发现什么问题。
要不试试从7.6直接升级8.3?

谢谢,  我再尝试尝试,这个问题确实有点奇怪
  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分0 (0 评价)
发表于 2017-9-29 16:50:55 | 显示全部楼层
2504不是行货的几率占8-9成,
  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分0 (0 评价)
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

Archiver | 思科服务支持社区  

GMT+8, 2017-10-23 23:27 , Processed in 0.090684 second(s), 42 queries .

京ICP备09041801号-187

版权所有 :copyright:1992-2019 思科系统  重要声明 | 保密声明 | 隐私权政策 | 商标 |

快速回复 返回顶部 返回列表