取消
显示结果 
搜索替代 
您的意思是: 
cancel
6007
查看次数
6
有帮助
6
回复

关于MDS 交换机的线卡

savi_bj
Level 1
Level 1

各位大神:
这个是什么问题?
rtp-san-23-02-9513# show mod
Mod Ports Module-Type Model Status
--- ----- ----------------------------------- ------------------ ----------
1 8 IP Storage Services Module DS-X9308-SMIP powered-dn
2 8 10 Gbps FCoE Module DS-X9708-K9 powered-dn
3 8 10 Gbps FCoE Module DS-X9708-K9 powered-dn

4 22 4x1GE IPS, 18x1/2/4Gbps FC Module DS-X9304-18K9 ok
5 24 1/2/4/8 Gbps FC Module DS-X9224-96K9 ok
6 8 10 Gbps FCoE Module DS-X9708-K9 powered-dn
7 0 Supervisor/Fabric-2a DS-X9530-SF2AK9 active *
8 0 Supervisor/Fabric-2a DS-X9530-SF2AK9 ha-standby
9 8 IP Storage Services Module DS-X9248-48K9 powered-dn
10 22 4x1GE IPS, 18x1/2/4Gbps FC Module DS-X9304-18K9 ok
11 22 4x1GE IPS, 18x1/2/4Gbps FC Module DS-X9304-18K9 ok
12 24 1/2/4/8 Gbps FC Module DS-X9224-96K9 ok
13 48 1/2/4/8/10 Gbps Advanced FC Module DS-X9248-256K9 ok
1 个已接受解答

已接受的解答

liuzhi001
Level 1
Level 1
查了一下文档,有几种可能的原因,但是都需要reload module。步骤如下:
Reinitializing a Failed Module Using the CLI
To reinitialize a failed module using the CLI, follow these steps:
1. Save the running configuration to the startup configuration.
switch# copy running-config start-config
2. Reload the module.
switch# reload module 2
3. If the module is not operating, verify the software image on the module.
switch# show module
4. If the software image on the module is not the latest, download the latest image to supervisor bootflash memory.
switch# copy tftp: bootflash:
5. Force-download the software image from the supervisor to the module.
switch# reload module 2 force-dnld
6. If the module is still not operating, verify the power status for the module.
switch# show environment power
7. If the module is not powered on, remove and reseat the module and then power on the module.
switch# config t
switch(config)# no poweroff module 2
switch(config)# exit
switch#
8. If the module is still not operating, reload the entire switch.
switch# reload
这样如果还不能解决问题,个人建议进行硬件维保吧。

在原帖中查看解决方案

6 条回复6

liuzhi001
Level 1
Level 1
查了一下文档,有几种可能的原因,但是都需要reload module。步骤如下:
Reinitializing a Failed Module Using the CLI
To reinitialize a failed module using the CLI, follow these steps:
1. Save the running configuration to the startup configuration.
switch# copy running-config start-config
2. Reload the module.
switch# reload module 2
3. If the module is not operating, verify the software image on the module.
switch# show module
4. If the software image on the module is not the latest, download the latest image to supervisor bootflash memory.
switch# copy tftp: bootflash:
5. Force-download the software image from the supervisor to the module.
switch# reload module 2 force-dnld
6. If the module is still not operating, verify the power status for the module.
switch# show environment power
7. If the module is not powered on, remove and reseat the module and then power on the module.
switch# config t
switch(config)# no poweroff module 2
switch(config)# exit
switch#
8. If the module is still not operating, reload the entire switch.
switch# reload
这样如果还不能解决问题,个人建议进行硬件维保吧。

liuzhi001
Level 1
Level 1
你这个是9513上加的storage LC吗?有没有相应的license?

savi_bj
Level 1
Level 1
liuzhi001 发表于 2017-12-11 19:43
你这个是9513上加的storage LC吗?有没有相应的license?

缺许可也会导致无法加电对吧

Jim—Jin
Cisco Employee
Cisco Employee
估计是坏了

one-time
Level 13
Level 13
感谢您的积极参与,已有多位小伙伴为您提供解决方案,若您的问题已解决,记得回来标记最佳答案哦~
入门指南

使用上面的搜索栏输入关键字、短语或问题,搜索问题的答案。

我们希望您在这里的旅程尽可能顺利,因此这里有一些链接可以帮助您快速熟悉思科社区:









快捷链接