请选择 进入手机版 | 继续访问电脑版

设为首页 收藏本站
思科服务支持社区 点击关注
思科服务支持社区

  
 找回密码
 立即注册

扫一扫,访问微社区

搜索
热搜: 邮件服务器
查看: 1074|回复: 2

【原创】思科UCS Manager 密码恢复

[复制链接]
发表于 2017-12-20 09:28:12 | 显示全部楼层 |阅读模式
本帖最后由 arvinjing 于 2017-12-20 13:37 编辑

昨天刚把Nexus 9000的密码恢复了,今天UCS Manager遇到同样的问题,好尴尬呀,下面和大家分享密码恢复的过程
开机CTRL+L 进入loader模式

loader> dir      先查看一下flash中的软件版本                                                              
bootflash:
  ucs-6100-k9-kickstart.5.0.3.N2.2.11.3a.bin
  ucs-6100-k9-system.5.0.3.N2.2.11.3a.bin  

loader> boot ucs-6100-k9-kickstart.5.0.3.N2.2.11.3a.bin         先启动kickstart软件               
Booting kickstart image: ucs-6100-k9-kickstart.5.0.3.N2.2.11.3a.bin....
...............................................................................
.......Image verification OK

Starting kernel...
Usage: init 0123456SsQqAaBbCcUu
INIT: version 2.85 booting
I2C - Mezz present
sprom_drv_init_platform: nuova_i2c_register_get_card_index
blogger: /var/log/isan.log: No such file or directory (2).
Starting system POST.....
  Executing Mod 1 1 SEEPROM Test:...done (0 seconds)
  Executing Mod 1 1 GigE Port Test:....done (32 seconds)
  Executing Mod 1 1 PCIE Test:.................done (0 seconds)
  Mod 1 1 Post Completed Successfully
POST is completed
autoneg unmodified, ignoring
autoneg unmodified, ignoring
S10mount-ramfs.supnuovaca Mounting /isan 3000m
Mounted /isan
Creating /callhome..
Mounting /callhome..
Creating /callhome done.
Callhome spool file system init done.
Checking all filesystems..... done.
Checking NVRAM block device ... done
The startup-config won't be used until the next reboot.
.
Loading system software
No system image Unexporting directories for NFS kernel daemon...done.
Stopping NFS kernel daemon: rpc.mountd rpc.nfsddone.
Unexporting directories for NFS kernel daemon...
done.
INIT: Sending processes the KILL signal
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2013, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
switch(boot)# conf t
Enter configuration commands, one per line.  End with CNTL/Z.
switch(boot)(config)# admin-password cisco@123  设置新的密码,如果系统提示需要满足复杂性要求,就设置一个复杂一些的密码
WARNING! Enabling local authentication for login through console due to password recovery

switch(boot)(config)# exit
switch(boot)# load bootflash:ucs-6100-k9-system.5.0.3.N2.2.11.3a.bin  然后启动system软件
Uncompressing system image: bootflash:/ucs-6100-k9-system.5.0.3.N2.2.11.3a.bin

Loading plugin 0: core_plugin...
Loading plugin 1: eth_plugin...
Loading plugin 2: fc_plugin...

System is coming up ... Please wait ...
2017 Dec 19 07:19:24  %$ VDC-1 %$ %VDC_MGR-2-VDC_ONLINE: vdc 1 has come online
System is coming up ... Please wait ...

Cisco UCS 6200 Series Fabric Interconnect
HX-FI-A login: admin               启动完成后,使用新设置的密码登录
Password: cisco@123
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2009, Cisco Systems, Inc. All rights reserved.

HX-FI-A#


  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分3 (1 评价)
发表于 2017-12-20 11:27:03 | 显示全部楼层
9K是开机按ctrl和[还是]进入boot模式的吧??
  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分2 (1 评价)
 楼主| 发表于 2017-12-20 13:37:43 | 显示全部楼层
zhengwei272 发表于 2017-12-20 11:27
9K是开机按ctrl和[还是]进入boot模式的吧??

CTRL+C就可以
  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分3 (1 评价)
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

Archiver | 思科服务支持社区  

GMT+8, 2018-9-22 21:48 , Processed in 0.078833 second(s), 33 queries .

京ICP备09041801号-187

版权所有 :copyright:1992-2019 思科系统  重要声明 | 保密声明 | 隐私权政策 | 商标 |

快速回复 返回顶部 返回列表