1815i是ME控制器模式
这是进入瘦AP的命令行的日志：
[*04/10/2018 18:16:35.7699] Re-Tx Count=4, Max Re-Tx Value=5, SendSeqNum=1, NumofPendingMsgs=1
[*04/10/2018 18:16:35.7699]
[*04/10/2018 18:16:38.6199] Re-Tx Count=5, Max Re-Tx Value=5, SendSeqNum=1, NumofPendingMsgs=1
[*04/10/2018 18:16:38.6199]
[*04/10/2018 18:16:41.4699] Re-Tx Count=6, Max Re-Tx Value=5, SendSeqNum=1, NumofPendingMsgs=1
[*04/10/2018 18:16:41.4699]
[*04/10/2018 18:16:41.4699] Max retransmission count exceeded, going back to DISCOVER mode.
[*04/10/2018 18:16:41.4799]
[*04/10/2018 18:16:41.4799] CAPWAP State: DTLS Teardown
[*04/10/2018 18:16:46.2299] In Flexconnect standalone, skip radio reset
[*04/10/2018 18:16:46.2299] In Flexconnect standalone, skip radio reset
[*04/10/2018 18:16:46.2699] Discovery Response from 10.0.0.254
[*04/10/2018 18:16:55.7299]
[*04/10/2018 18:16:55.7299] CAPWAP State: DTLS Setup
[*04/10/2018 18:16:55.8899]
[*04/10/2018 18:16:55.8899] CAPWAP State: Join
[*04/10/2018 18:16:55.8999] Sending Join request to 10.0.0.254 through port 5264
[*04/10/2018 18:16:55.8999] Join Response from 10.0.0.254
[*04/10/2018 18:16:56.0099]
[*04/10/2018 18:16:56.0099] CAPWAP State: Image Data
[*04/10/2018 18:16:56.0899] do NO_UPGRADE, part2 is active part
[*04/10/2018 18:16:56.0999]
[*04/10/2018 18:16:56.0999] CAPWAP State: Configure
[*04/10/2018 18:16:56.0999] DOT11_CFG[0] Radio Mode is changed from FlexConnect to FlexConnect
[*04/10/2018 18:16:56.0999] DOT11_CFG[1] Radio Mode is changed from FlexConnect to FlexConnect
错误现象为：使用WEB配置后一切正常且无线接入点数为1（ME自身）但是使用CLI做配置后，WEB访问无线接入点数量为0，如何处理，谢谢~