请选择 进入手机版 | 继续访问电脑版

设为首页 收藏本站
思科服务支持社区 点击关注
思科服务支持社区

  
 找回密码
 立即注册

扫一扫,访问微社区

搜索
热搜: 邮件服务器
查看: 1666|回复: 13

求:cisco 6509设备,有一块插槽模块提示unknown 和pwrdown ,不知道什么原因。 ...

[复制链接]
发表于 2018-5-5 17:11:32 | 显示全部楼层 |阅读模式
0可用金钱
求:cisco 6509设备,有一块插槽模块提示unknown 和pwrdown ,不知道什么原因。

请高手指点。谢谢!

  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分2 (3 评价)
发表于 2018-5-7 13:57:08 | 显示全部楼层
很多原因的,比如IOS版本不支持,机箱背板故障,业务板卡自身故障,业务板卡没插到位,
撸主告知一下业务板卡具体型号,引擎具体型号,IOS版本信息,机箱是6509还是6509-E, 还有热插拔该业务板卡后,超级终端弹出的信息和show  modu信息
  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分3 (1 评价)
发表于 2018-5-7 14:37:33 | 显示全部楼层
When a module appears as Unknown on the show module command output, make sure you check these:

  • The supervisor engine and the software it runs support the module.
  • The specifications of the module. Make sure the module can be inserted in any slot or if it can only be inserted in specific slots.

Note: For both options, check the Release Notes of the software version that the supervisor engine runs.


After you insert a module, the status of it is PwrDeny. If this is the case, check if there is enough power to turn on the module that appears as PwrDeny.

If you have checked that the power supplies deliver enough power to turn on all of the modules, then enter the power enable module [module slot number] command in order to enable the power for the module that appears as PwrDeny:

    Switch(config)#power enable module 4

If you are still unable to determine the problem, or if the error message is not present in the documentation, contact the Cisco Technical Support escalation center.

以上信息来自:Online Insertion and Removal (OIR) of Modules in Cisco Catalyst Switches
楼主可以参考一下
  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分5 (1 评价)
发表于 2018-5-7 14:48:03 | 显示全部楼层
楼主还可以参考一下下面的文章
Cisco Catalyst 6500 Series Switches - Module status is Unknown / PwrDeny
https://support.hpe.com/hpsc/doc ... ocId=mmr_kc-0130828
  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分2 (1 评价)
发表于 2018-5-7 15:34:54 | 显示全部楼层
什么板卡?把show module的输出内容贴出来看看。
另外,有可能是人工手动关闭了板卡,尝试把板卡热插拔一次看看启动过程就能看出问题。
  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分4 (1 评价)
发表于 2018-5-7 16:33:09 | 显示全部楼层
可能是槽位电源关闭了,可以尝试no power enable module slot X开启槽位电源...
  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分3 (1 评价)
发表于 2018-5-8 16:08:15 | 显示全部楼层
show module
show env power
show log
还有 pwr down module 的具体 PID
提供以下
  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分0 (0 评价)
 楼主| 发表于 2018-5-21 19:10:11 | 显示全部楼层
Router#show module
Mod Ports Card Type                              Model              Serial No.
--- ----- -------------------------------------- ------------------ -----------
  6    8  8 port 1000mb GBIC Enhanced QoS        WS-X6408A-GBIC     SAL1249C6DY
  8    2  Supervisor Engine 720 (Active)         WS-SUP720-3B       SAL1226VCRF
10   48  48 port 10/100 mb RJ45                 WS-X6148A-RJ-45    SAL1248B4SX
12   48  FRU type (0x6003, 0x399(921))          WS-X6148A-GE-TX    SAL1113K62T

Mod MAC addresses                       Hw    Fw           Sw           Status
--- ---------------------------------- ------ ------------ ------------ -------
  6  0005.3130.4958 to 0005.3130.495f   2.3   5.4(2)       8.3(0.156)RO Ok
  8  0013.c43a.6c48 to 0013.c43a.6c4b   4.6   8.5(2)       12.2(18)SXD7 Ok
10  0030.9634.df28 to 0030.9634.df57   1.1   5.3(1)       8.3(0.156)RO Ok
12  001b.2a04.7e40 to 001b.2a04.7e6f   1.5   Unknown      Unknown      PwrDown

Mod Sub-Module                  Model              Serial        Hw     Status
--- --------------------------- ------------------ ------------ ------- -------
  8 Policy Feature Card 3       WS-F6K-PFC3B       SAL1004BG73   2.4    Ok
  8 MSFC3 Daughterboard         WS-SUP720          SAL1003AMVC   2.8    Ok

Mod Online Diag Status
--- -------------------
  6 Pass
  8 Pass
10 Pass  
12 Unknown




Router#show environment status module 12
The module in slot 12, is either not present or not online.





Router#show log
Router#show logging
Syslog logging: enabled (0 messages dropped, 0 messages rate-limited, 0 flushes, 0 overruns)
    Console logging: level debugging, 37 messages logged
    Monitor logging: level debugging, 0 messages logged
    Buffer logging: level debugging, 37 messages logged
    Exception Logging: size (4096 bytes)
    Count and timestamp logging messages: disabled
    Trap logging: level informational, 60 message lines logged
         
Log Buffer (8192 bytes):

00:00:44: curr is 0x0

00:00:44: RP: Currently running ROMMON from S (Gold) region
00:01:09: %SYS-4-CONFIG_RESOLVE_FAILURE: System config parse from (tftp://255.255.255.255/network-confg) failed
00:01:09: %SYS-4-CONFIG_RESOLVE_FAILURE: System config parse from (tftp://255.255.255.255/cisconet.cfg) failed
00:01:18: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) s72033_rp Software (s72033_rp-PSV-M), Version 12.2(18)SXD7b, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by cisco Systems, Inc.
Compiled Fri 08-Dec-06 12:38 by ccai
00:00:03: %SYS-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.

00:00:04: %SYS-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.

         
Firmware compiled 24-Oct-06 16:18 by integ Build [100]


- RELIABILITY DRIVER: wrong signature on NVFLASH

00:00:52: SP: IDB is not allocated for unsupported card: slot 12, index 196
00:00:52: %SPANTREE-SP-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
00:00:52: SP: SP: Currently running ROMMON from F1 region
00:01:18: %SYS-SP-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) s72033_sp Software (s72033_sp-PSV-M), Version 12.2(18)SXD7b, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by cisco Systems, Inc.
Compiled Fri 08-Dec-06 12:31 by ccai
00:01:19: %OIR-SP-6-INSPS: Power supply inserted in slot 1
00:01:19: %C6KPWR-SP-4-PSOK: power supply 1 turned on.
00:01:19: %OIR-SP-6-INSPS: Power supply inserted in slot 2
00:01:19: %C6KPWR-SP-4-PSOK: power supply 2 turned on.
00:01:19: %C6KPWR-SP-4-PSREDUNDANTBOTHSUPPLY: in power-redundancy mode, system is operating on both power supplies.
00:01:21: %C6KENV-SP-4-FANHIOUTPUT: Version 2 high-output fan-tray is in effect
00:01:21: %C6KPWR-SP-4-UNSUPPORTED: unsupported module in slot 12, power not allowed: Unknown Card Type.
00:01:23: %FABRIC-SP-5-CLEAR_BLOCK: Clear block option is off for the fabric in slot 8.
00:01:24: %FABRIC-SP-5-FABRIC_MODULE_ACTIVE: The Switch Fabric Module in slot 8 became active.
00:01:25: %DIAG-SP-6-RUN_MINIMUM: Module 8: Running Minimum Diagnostics...
00:01:37: %DIAG-SP-6-DIAG_OK: Module 8: Passed Online Diagnostics
00:01:37: %OIR-SP-6-INSCARD: Card inserted in slot 8, interfaces are now online
00:01:42: %DIAG-SP-6-RUN_MINIMUM: Module 6: Running Minimum Diagnostics...
00:01:44: %DIAG-SP-6-DIAG_OK: Module 6: Passed Online Diagnostics
00:01:44: %OIR-SP-6-INSCARD: Card inserted in slot 6, interfaces are now online
00:02:01: %DIAG-SP-6-RUN_MINIMUM: Module 10: Running Minimum Diagnostics...
00:02:10: %DIAG-SP-6-DIAG_OK: Module 10: Passed Online Diagnostics
00:02:10: %OIR-SP-6-INSCARD: Card inserted in slot 10, interfaces are now online
00:03:35: %C6KPWR-SP-4-UNSUPPORTED: unsupported module in slot 12, power not allowed: Unknown Card Type.
00:07:30: %SYS-5-CONFIG_I: Configured from console by console
6d21h: %C6KENV-SP-4-PSFANFAILED: the fan in power supply 1 has failed
6d21h: %C6KPWR-SP-4-PSINPUTDROP: Power supply 1 input has dropped
6d21h: %C6KPWR-SP-4-PSFAIL: power supply 1 output failed.
6d21h: %C6KPWR-SP-4-PSREDUNDANTONESUPPLY: in power-redundancy mode, system is operating on one power supply.
6d21h: %C6KPWR-SP-4-DISABLED: power to module in slot 6 set off (Reset)
6d21h: %C6KPWR-SP-4-DISABLED: power to module in slot 10 set off (Reset)
6d21h: %DIAG-SP-6-RUN_MINIMUM: Module 6: Running Minimum Diagnostics...
6d21h: %DIAG-SP-6-DIAG_OK: Module 6: Passed Online Diagnostics
6d21h: %OIR-SP-6-INSCARD: Card inserted in slot 6, interfaces are now online
6d21h: %DIAG-SP-6-RUN_MINIMUM: Module 10: Running Minimum Diagnostics...
6d21h: %DIAG-SP-6-DIAG_OK: Module 10: Passed Online Diagnostics
6d21h: %OIR-SP-6-INSCARD: Card inserted in slot 10, interfaces are now online
6d23h: %C6KENV-SP-4-PSFANOK: the fan in power supply 1 is OK
6d23h: %C6KPWR-SP-4-PSOK: power supply 1 turned on.
6d23h: %C6KPWR-SP-4-PSREDUNDANTBOTHSUPPLY: in power-redundancy mode, system is operating on both power supplies.
2w2d: %SYS-5-CONFIG_I: Configured from console by console
2w2d: %C6KPWR-SP-4-UNSUPPORTED: unsupported module in slot 12, power not allowed: Unknown Card Type.
2w2d: %C6KPWR-SP-4-UNSUPPORTED: unsupported module in slot 12, power not allowed: Unknown Card Type.
2w2d: %SYS-5-CONFIG_I: Configured from console by console
2w2d: %C6KPWR-SP-4-UNSUPPORTED: unsupported module in slot 12, power not allowed: Unknown Card Type.
2w2d: %SYS-5-CONFIG_I: Configured from console by console

  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分0 (0 评价)
 楼主| 发表于 2018-5-21 19:20:09 | 显示全部楼层
outer#sh version
Cisco Internetwork Operating System Software
IOS (tm) s72033_rp Software (s72033_rp-PSV-M), Version 12.2(18)SXD7b, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by cisco Systems, Inc.
Compiled Fri 08-Dec-06 12:38 by ccai
Image text-base: 0x4002100C, data-base: 0x42040000

ROM: System Bootstrap, Version 12.2(17r)S4, RELEASE SOFTWARE (fc1)
BOOTLDR: s72033_rp Software (s72033_rp-PSV-M), Version 12.2(18)SXD7b, RELEASE SOFTWARE (fc1)

Router uptime is 2 weeks, 2 days, 2 hours, 33 minutes
Time since Router switched to active is 2 weeks, 2 days, 2 hours, 32 minutes
System returned to ROM by reload at 00:16:52 UTC Thu Dec 18 2008 (SP by reload)
System image file is "sup-bootflash:s72033-psv-mz.122-18.SXD7b.bin"

cisco WS-C6513 (R7000) processor (revision 1.0) with 458720K/65536K bytes of memory.
Processor board ID SAL1029VM6X
SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache
Last reset from s/w reset
X.25 software, Version 3.0.0.
Bridging software.
1 Virtual Ethernet/IEEE 802.3  interface(s)
48 FastEthernet/IEEE 802.3 interface(s)
10 Gigabit Ethernet/IEEE 802.3 interface(s)
1917K bytes of non-volatile configuration memory.
8192K bytes of packet buffer memory.

65536K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102
  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分0 (0 评价)
 楼主| 发表于 2018-5-22 12:45:54 | 显示全部楼层
fushuang 发表于 2018-5-8 16:08
show module
show env power
show log

Router#show module
Mod Ports Card Type                              Model              Serial No.
--- ----- -------------------------------------- ------------------ -----------
  6    8  8 port 1000mb GBIC Enhanced QoS        WS-X6408A-GBIC     SAL1249C6DY
  8    2  Supervisor Engine 720 (Active)         WS-SUP720-3B       SAL1226VCRF
10   48  48 port 10/100 mb RJ45                 WS-X6148A-RJ-45    SAL1248B4SX
12   48  FRU type (0x6003, 0x399(921))          WS-X6148A-GE-TX    SAL1113K62T

Mod MAC addresses                       Hw    Fw           Sw           Status
--- ---------------------------------- ------ ------------ ------------ -------
  6  0005.3130.4958 to 0005.3130.495f   2.3   5.4(2)       8.3(0.156)RO Ok
  8  0013.c43a.6c48 to 0013.c43a.6c4b   4.6   8.5(2)       12.2(18)SXD7 Ok
10  0030.9634.df28 to 0030.9634.df57   1.1   5.3(1)       8.3(0.156)RO Ok
12  001b.2a04.7e40 to 001b.2a04.7e6f   1.5   Unknown      Unknown      PwrDown

Mod Sub-Module                  Model              Serial        Hw     Status
--- --------------------------- ------------------ ------------ ------- -------
  8 Policy Feature Card 3       WS-F6K-PFC3B       SAL1004BG73   2.4    Ok
  8 MSFC3 Daughterboard         WS-SUP720          SAL1003AMVC   2.8    Ok

Mod Online Diag Status
--- -------------------
  6 Pass
  8 Pass
10 Pass  
12 Unknown




Router#show environment status module 12
The module in slot 12, is either not present or not online.





Router#show log
Router#show logging
Syslog logging: enabled (0 messages dropped, 0 messages rate-limited, 0 flushes, 0 overruns)
    Console logging: level debugging, 37 messages logged
    Monitor logging: level debugging, 0 messages logged
    Buffer logging: level debugging, 37 messages logged
    Exception Logging: size (4096 bytes)
    Count and timestamp logging messages: disabled
    Trap logging: level informational, 60 message lines logged
         
Log Buffer (8192 bytes):

00:00:44: curr is 0x0

00:00:44: RP: Currently running ROMMON from S (Gold) region
00:01:09: %SYS-4-CONFIG_RESOLVE_FAILURE: System config parse from (tftp://255.255.255.255/network-confg) failed
00:01:09: %SYS-4-CONFIG_RESOLVE_FAILURE: System config parse from (tftp://255.255.255.255/cisconet.cfg) failed
00:01:18: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) s72033_rp Software (s72033_rp-PSV-M), Version 12.2(18)SXD7b, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by cisco Systems, Inc.
Compiled Fri 08-Dec-06 12:38 by ccai
00:00:03: %SYS-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.

00:00:04: %SYS-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.

         
Firmware compiled 24-Oct-06 16:18 by integ Build [100]


- RELIABILITY DRIVER: wrong signature on NVFLASH

00:00:52: SP: IDB is not allocated for unsupported card: slot 12, index 196
00:00:52: %SPANTREE-SP-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
00:00:52: SP: SP: Currently running ROMMON from F1 region
00:01:18: %SYS-SP-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) s72033_sp Software (s72033_sp-PSV-M), Version 12.2(18)SXD7b, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by cisco Systems, Inc.
Compiled Fri 08-Dec-06 12:31 by ccai
00:01:19: %OIR-SP-6-INSPS: Power supply inserted in slot 1
00:01:19: %C6KPWR-SP-4-PSOK: power supply 1 turned on.
00:01:19: %OIR-SP-6-INSPS: Power supply inserted in slot 2
00:01:19: %C6KPWR-SP-4-PSOK: power supply 2 turned on.
00:01:19: %C6KPWR-SP-4-PSREDUNDANTBOTHSUPPLY: in power-redundancy mode, system is operating on both power supplies.
00:01:21: %C6KENV-SP-4-FANHIOUTPUT: Version 2 high-output fan-tray is in effect
00:01:21: %C6KPWR-SP-4-UNSUPPORTED: unsupported module in slot 12, power not allowed: Unknown Card Type.
00:01:23: %FABRIC-SP-5-CLEAR_BLOCK: Clear block option is off for the fabric in slot 8.
00:01:24: %FABRIC-SP-5-FABRIC_MODULE_ACTIVE: The Switch Fabric Module in slot 8 became active.
00:01:25: %DIAG-SP-6-RUN_MINIMUM: Module 8: Running Minimum Diagnostics...
00:01:37: %DIAG-SP-6-DIAG_OK: Module 8: Passed Online Diagnostics
00:01:37: %OIR-SP-6-INSCARD: Card inserted in slot 8, interfaces are now online
00:01:42: %DIAG-SP-6-RUN_MINIMUM: Module 6: Running Minimum Diagnostics...
00:01:44: %DIAG-SP-6-DIAG_OK: Module 6: Passed Online Diagnostics
00:01:44: %OIR-SP-6-INSCARD: Card inserted in slot 6, interfaces are now online
00:02:01: %DIAG-SP-6-RUN_MINIMUM: Module 10: Running Minimum Diagnostics...
00:02:10: %DIAG-SP-6-DIAG_OK: Module 10: Passed Online Diagnostics
00:02:10: %OIR-SP-6-INSCARD: Card inserted in slot 10, interfaces are now online
00:03:35: %C6KPWR-SP-4-UNSUPPORTED: unsupported module in slot 12, power not allowed: Unknown Card Type.
00:07:30: %SYS-5-CONFIG_I: Configured from console by console
6d21h: %C6KENV-SP-4-PSFANFAILED: the fan in power supply 1 has failed
6d21h: %C6KPWR-SP-4-PSINPUTDROP: Power supply 1 input has dropped
6d21h: %C6KPWR-SP-4-PSFAIL: power supply 1 output failed.
6d21h: %C6KPWR-SP-4-PSREDUNDANTONESUPPLY: in power-redundancy mode, system is operating on one power supply.
6d21h: %C6KPWR-SP-4-DISABLED: power to module in slot 6 set off (Reset)
6d21h: %C6KPWR-SP-4-DISABLED: power to module in slot 10 set off (Reset)
6d21h: %DIAG-SP-6-RUN_MINIMUM: Module 6: Running Minimum Diagnostics...
6d21h: %DIAG-SP-6-DIAG_OK: Module 6: Passed Online Diagnostics
6d21h: %OIR-SP-6-INSCARD: Card inserted in slot 6, interfaces are now online
6d21h: %DIAG-SP-6-RUN_MINIMUM: Module 10: Running Minimum Diagnostics...
6d21h: %DIAG-SP-6-DIAG_OK: Module 10: Passed Online Diagnostics
6d21h: %OIR-SP-6-INSCARD: Card inserted in slot 10, interfaces are now online
6d23h: %C6KENV-SP-4-PSFANOK: the fan in power supply 1 is OK
6d23h: %C6KPWR-SP-4-PSOK: power supply 1 turned on.
6d23h: %C6KPWR-SP-4-PSREDUNDANTBOTHSUPPLY: in power-redundancy mode, system is operating on both power supplies.
2w2d: %SYS-5-CONFIG_I: Configured from console by console
2w2d: %C6KPWR-SP-4-UNSUPPORTED: unsupported module in slot 12, power not allowed: Unknown Card Type.
2w2d: %C6KPWR-SP-4-UNSUPPORTED: unsupported module in slot 12, power not allowed: Unknown Card Type.
2w2d: %SYS-5-CONFIG_I: Configured from console by console
2w2d: %C6KPWR-SP-4-UNSUPPORTED: unsupported module in slot 12, power not allowed: Unknown Card Type.
2w2d: %SYS-5-CONFIG_I: Configured from console by console
  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分0 (0 评价)
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

Archiver | 思科服务支持社区  

GMT+8, 2018-8-15 11:50 , Processed in 0.103049 second(s), 55 queries .

京ICP备09041801号-187

版权所有 :copyright:1992-2019 思科系统  重要声明 | 保密声明 | 隐私权政策 | 商标 |

快速回复 返回顶部 返回列表