本帖最后由 xuhyoyeon 于 2018-6-20 10:39 编辑 先前遇到个问题,AD同步通讯组到Cisco jabber (version 11.9.3)。
超过100人的组内,人员的状态有些无法显示。
之后询问过供应商都不太了解这个问题,直到开CASE给Cisco。
回复给我:Cisco jabber 本身就有这个人数限制,人数不要超过100。
具体文档资料
https://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-version-110/200574-Configure-the-Enterprise-Group-for-CUCM.html· If the Presence of the AD Group member is not shown then check if the AD Group members count is more than 100. If it is more than 100 then the presence for that AD Group is blocked as the maximum limit is 100 for each AD Group
可以将CUCM 和 IM&P升级到11.5以上去修改IM&P中的参数,去解决这个问题。