请选择 进入手机版 | 继续访问电脑版

设为首页 收藏本站
思科社区 关注
思科社区

  思科 CCO 登录
 找回密码
 立即注册

扫一扫,访问微社区

搜索
热搜: 邮件服务器
查看: 337|回复: 2

ISR G2 Router 开机过程

[复制链接]
发表于 2018-9-7 11:16:22 | 显示全部楼层 |阅读模式
Proceed with reload? [confirm]

*Sep  7 10:09:25.051: %SYS-5-RELOAD: Reload requested by guangxil on console. Reload Reason: Reload Command.
RO ROMMON (00000000)
Initializing DRAM                                                    <<<<<<<<<<<<<  Initialize Memory DIMMs through I2C bus
Clearing DRAM 1st 16MB..... done                        <<<<<<<<<<<<<<   Write 0's to DDR2 memory for the first 256MB memory
Performing the Memory POST Test                     >>>>>>>>>>>>>>  1.
Testing memory - L2 data cache ECC               
Testing memory - L2 instruction cache ECC      
Testing memory - ECC DDR memory                  
Memory POST Test Success                              >>>>>>>>>>>>>>>>1.    Testing CPU internal Memory


Memory tests are from 0x80403000 to 0x80503000               >>>>>>>>>>>>2.
Testing memory - all 0xffffffff
Testing memory - data equals address
Testing memory - checkerboard
Testing memory - inverse checkerboard
Testing memory - all 0x00000000                             
Memory test complete -- PASS                    >>>>>>>>>>2.Testing On-Board Memory within specified address location with different pattems
Relocating the code to DRAM                  <<<<<<<<<<<<<<<<< Copy portion of rommon image to DDR2 memory
Continue initializing the platform
Clearing the rest of 1st 256MB (240MB).....
Clearing next 256MB of On-board DRAM

Memory tests are from 0x80000000 to 0x80403000                  >>>>>>>>>>>>>>>>3.
Testing memory - all 0xffffffff
Testing memory - data equals address
Testing memory - checkerboard
Testing memory - inverse checkerboard
Testing memory - all 0x00000000
Memory test complete -- PASS                       

Memory tests are from 0x80803000 to 0x80B03000
Testing memory - all 0xffffffff
Testing memory - data equals address
Testing memory - checkerboard
Testing memory - inverse checkerboard
Testing memory - all 0x00000000
Memory test complete -- PASS

Memory tests are from 0x80B23F38 to 0x81000000
Testing memory - all 0xffffffff
Testing memory - data equals address
Testing memory - checkerboard
Testing memory - inverse checkerboard
Testing memory - all 0x00000000
Memory test complete -- PASS                                     >>>>>>>>>>>>>>3.Initialize and test of the DDR2 memory
Retrieve board id 1

Reset type is System Reset
No Frequency Margin
Performing the CPU BIST Test
Testing memory - CPU internal memory
CPU BIST Success
Performing the IOCTRL BIST Test
IOCTRL BIST Success

Before CFI command
Passed CFI querry string

Value for write(TYP)=6

Value for write(Max)=3

Value for write buffer(TYP)=6

Value for write buffer(Max)=5

Value for erase(TYP)=9

Value for erase(MAX)=3

cfi_write_time = 400

cfi_wr_buf_time = 1000

cfi_erase_time = 7d0000

After CFI commandInit Rommon Upgrade NVRAM Vars     <<<<<<<<Flash memory corruption cause this step to fail;No need to replace the part
Compact Flash Initialization                                                    >>>>>>>>unless the failure keeps showing up after couple rommeon boot up

Compact Flash 0 is present

Power recycle of CF 0 successful

CF 1 not present

System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1)   <<<<Print Banner
Technical Support: http://www.cisco.com/techsupport                              <<<<Print Banner
Copyright (c) 2012 by cisco Systems, Inc.                                               <<<<Print Banner

Total memory size = 512 MB - On-board = 512 MB, DIMM0 = 0 MB        <<<<Print Banner
Set up ROMMON TLB
Disable the 3rd level watchdog during mem test
Enable the 3rd level watchdog after mem test
Initialize PCIE Interface and Goofy     >>>>>>>>>>>>Initializes PCIE interface between CPU and I/O Contorller; if fails, check CPU 100MHz differential
Enable EHWIC reference clock                       <<<<<<<<ref clock and make QLM 1.2 is there
Enable second reference clock source

Read second_ref_clock CLK2 : rc = 1 data [0x16]
Write second_ref_clock CLK2 : rc = 1 data [0x16]
Init Exception
Init Platform Cookie
Other core(s) process

Sizing NVRAM

Set Up Environmental Data

Validate EEPROM Checksum.            <<<<<<<<<<<<If  EEPROM checksum fails still after reboot , check U3F
Turn off the 2rd level watchdog
Turn off the 3rd level watchdog
Exiting Init
CISCO1941/K9 platform with 524288 Kbytes of main memory             <<<<Print Banner
Main memory is configured to 64/-1(On-board/DIMM0) bit mode with ECC disabled           <<<<Print Banner


Readonly ROMMON initialized                       <<<<Print Banner
rommon 1 > boot
program load complete, entry point: 0x80803000, size: 0x1b340
program load complete, entry point: 0x80803000, size: 0x1b340


IOS Image Load Test
___________________
Digitally Signed Release Software
program load complete, entry point: 0x81000000, size: 0x50101fc
Stack pointer       : 0x8EFFFF80
monstack            : 0x80FFFFC0
monra               : 0x80410474
edata : 0x81019300
start : 0x81019300
magic : 0xFEEDFACE
memsize             : 0x0F000000
uncomp_size         : 0x0AB72988
comp_size           : 0x04FF6EE6
STACK_BYTES         : 0x00008000
COPY_CODE_BUF       : 0x00000800
_end                : 0x81045000
comp_checksum       : 0xB4636796
comp_checksum       : 0xB4636796
uncomp_checksum     : 0x811E7BBC
Self decompressing the image : ####################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################### [OK]
Source elf_hdr->e_shnum = 0x0000000D
Setting up to copy ELF section 0x00000001
to image_info section 0x00000000
sh_name = 0x0000000B
sh_type = 0x00000001
sh_flags = 0x00000007
sh_addr = 0x81000000
sh_offset = 0x00001000
sh_size = 0x05F52000
sh_link = 0x00000000
sh_info = 0x00000000
sh_addralign = 0x00002000
sh_entsize = 0x00000000
Setting up to copy ELF section 0x00000002
to image_info section 0x00000001
sh_name = 0x00000011
sh_type = 0x00000001
sh_flags = 0x00000002
sh_addr = 0x86F52000
sh_offset = 0x05F53000
sh_size = 0x02107FE0
sh_link = 0x00000000
sh_info = 0x00000000
sh_addralign = 0x00000008
sh_entsize = 0x00000000
Setting up to copy ELF section 0x00000003
to image_info section 0x00000002
sh_name = 0x00000019
sh_type = 0x00000001
sh_flags = 0x00000002
sh_addr = 0x89059FE0
sh_offset = 0x0805AFE0
sh_size = 0x00000064
sh_link = 0x00000000
sh_info = 0x00000000
sh_addralign = 0x00000004
sh_entsize = 0x00000000
Setting up to copy ELF section 0x00000004
to image_info section 0x00000003
sh_name = 0x00000023
sh_type = 0x00000001
sh_flags = 0x00000002
sh_addr = 0x8905A044
sh_offset = 0x0805B044
sh_size = 0x011C9658
sh_link = 0x00000000
sh_info = 0x00000000
sh_addralign = 0x00000004
sh_entsize = 0x00000000
Setting up to copy ELF section 0x00000005
to image_info section 0x00000004
sh_name = 0x0000002D
sh_type = 0x00000001
sh_flags = 0x00000003
sh_addr = 0x8A2236EC
sh_offset = 0x092246EC
sh_size = 0x0103EEB4
sh_link = 0x00000000
sh_info = 0x00000000
sh_addralign = 0x00000080
sh_entsize = 0x00000000
Setting up to copy ELF section 0x00000006
to image_info section 0x00000005
sh_name = 0x00000033
sh_type = 0x00000001
sh_flags = 0x00000003
sh_addr = 0x8B2625A0
sh_offset = 0x0A2635A0
sh_size = 0x00000020
sh_link = 0x00000000
sh_info = 0x00000000
sh_addralign = 0x00000001
sh_entsize = 0x00000000
Setting up to copy ELF section 0x00000007
to image_info section 0x00000006
sh_name = 0x0000003A
sh_type = 0x00000001
sh_flags = 0x10000003
sh_addr = 0x8B2625C0
sh_offset = 0x0A2635C0
sh_size = 0x000027A0
sh_link = 0x00000000
sh_info = 0x00000000
sh_addralign = 0x00000010
sh_entsize = 0x00000000
Setting up to copy ELF section 0x00000008
to image_info section 0x00000007
sh_name = 0x00000041
sh_type = 0x00000001
sh_flags = 0x10000003
sh_addr = 0x8B264D60
sh_offset = 0x0A265D60
sh_size = 0x00008D20
sh_link = 0x00000000
sh_info = 0x00000000
sh_addralign = 0x00000008
sh_entsize = 0x00000000
cpu type                   : 0x00000040
uncomp_size                : 0x0AB72988
monstack                   : 0x80FFFFC0

image_info.entry_point   = 0x81004F80
image_info.section_count = 0x00000008
image_info.monstack      = 0x80FFFFC0
image_info.monra         = 0x80410474
image_info.param0        = 0x00000002
image_info.param1        = 0x00000000
image_info.param2        = 0x80B0F770
image_info.param3        = 0x81000000
Section Index = 0x00000000
    source    = 0x81046100
    dest      = 0x81004F80
    bytes     = 0x05F52000
Section Index = 0x00000001
    source    = 0x86F98100
    dest      = 0x86F56F80
    bytes     = 0x02107FE0
Section Index = 0x00000002
    source    = 0x890A00E0
    dest      = 0x8905EF60
    bytes     = 0x00000064
Section Index = 0x00000003
    source    = 0x890A0144
    dest      = 0x8905EFC4
    bytes     = 0x011C9658
Section Index = 0x00000004
    source    = 0x8A2697EC
    dest      = 0x8A22866C
    bytes     = 0x0103EEB4
Section Index = 0x00000005
    source    = 0x8B2A86A0
    dest      = 0x8B267520
    bytes     = 0x00000020
Section Index = 0x00000006
    source    = 0x8B2A86C0
    dest      = 0x8B267540
    bytes     = 0x000027A0
Section Index = 0x00000007
    source    = 0x8B2AAE60
    dest      = 0x8B269CE0
    bytes     = 0x00008D20

Smart Init is enabled
smart init is sizing iomem
                 TYPE      MEMORY_REQ
    Onboard devices &
         buffer pools      0x01E8F000
-----------------------------------------------
               TOTAL:      0x01E8F000

Rounded IOMEM up to: 32MB.
Using 6 percent iomem. [32MB/512MB]

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706



Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.6(3)M1, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2016 by Cisco Systems, Inc.
Compiled Fri 02-Dec-16 15:02 by prod_rel_team


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Installed image archive
Cisco CISCO1941/K9 (revision 1.0) with 491520K/32768K bytes of memory.
Processor board ID FGL183925EQ
2 Gigabit Ethernet interfaces
1 terminal line
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity disabled.
255K bytes of non-volatile configuration memory.
255488K bytes of ATA System CompactFlash 0 (Read/Write)


         --- System Configuration Dialog ---

Would you like to enter the initial configuration dialog? [yes/no]: no


Press RETURN to get started!


*Jan  2 00:00:02.083: %SMART_LIC-6-AGENT_READY: Smart Agent for Licensing is initialized
*Jan  2 00:00:02.399: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c1900 Next reboot level = ipbasek9 and License = ipbasek9
*Jan  2 00:00:02.595: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c1900 Next reboot level = securityk9 and License = securityk9
*Jan  2 00:00:02.795: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c1900 Next reboot level = datak9 and License = datak9
*Sep  7 10:12:23.619: c3600_scp_set_dstaddr2_idb(185)add = 80 name is Embedded-Service-Engine0/0
*Sep  7 10:12:38.575: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0  State changed to: Initialized
*Sep  7 10:12:38.579: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0  State changed to: Enabled
*Sep  7 10:12:45.239: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to up
*Sep  7 10:12:45.239: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down
*Sep  7 10:12:46.287: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up
*Sep  7 10:12:46.287: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to down
*Sep  7 10:12:47.699: %SYS-6-STARTUP_CONFIG_IGNORED: System startup configuration is ignored based on the configuration register setting.
*Sep  7 10:12:59.663: %LINK-5-CHANGED: Interface Embedded-Service-Engine0/0, changed state to administratively down
*Sep  7 10:12:59.663: %LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to administratively down
*Sep  7 10:12:59.663: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to administratively down
*Sep  7 10:13:00.695: %LINEPROTO-5-UPDOWN: Line protocol on Interface Embedded-Service-Engine0/0, changed state to down
*Sep  7 10:13:00.695: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to down
*Sep  7 10:13:01.927: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.6(3)M1, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2016 by Cisco Systems, Inc.
Compiled Fri 02-Dec-16 15:02 by prod_rel_team
*Sep  7 10:13:02.603: %SYS-6-BOOTTIME: Time taken to reboot after reload =  222 seconds
*Sep  7 10:13:03.215: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*Sep  7 10:13:03.215: %CRYPTO-6-GDOI_ON_OFF: GDOI is OFF
*Sep  7 10:13:03.215: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*Sep  7 10:13:03.215: %CRYPTO-6-GDOI_ON_OFF: GDOI is OFF
Router>
  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分3 (2 评价)
发表于 2018-9-10 09:22:46 | 显示全部楼层
请问,这有何有用信息不?
  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分0 (0 评价)
 楼主| 发表于 2018-9-10 17:23:29 | 显示全部楼层
wuleihen 发表于 2018-9-10 09:22
请问,这有何有用信息不?

G2路由器开机不能正常启动的时候能看到具体是在启动的哪里出了问题
  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分5 (1 评价)
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

Archiver | 思科社区  

GMT+8, 2018-9-24 06:47 , Processed in 0.087363 second(s), 33 queries .

京ICP备09041801号-187

版权所有 :copyright:1992-2019 思科系统  重要声明 | 保密声明 | 隐私权政策 | 商标 |

快速回复 返回顶部 返回列表