本帖最后由 xy411381121 于 2018-12-11 12:02 编辑 地方上有一部分老路由器，是思科的1760，我们中心这里有两套核心路由器，作为主备，最近发现这些1760路由器在访问中心服务器时，路径并不是最优的，排查后，才发现，许多地方路由器连接中心的端口Ser 1/1带宽居然还是128K，而地方路由器之间的端口Ser 0/0反而是1544K，请问，这是1760这款路由器不同插槽的带宽不同的原因，还是地方上的物理链路存在问题啊？查看路由器的插槽模块信息是用什么命令啊？
1760#sho ver
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-Y-M), Version 12.2(11)T1, RELEASE SOFTWARE (fc2)
TAC Support:
http://www.cisco.com/tacCopyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Mon 30-Sep-02 02:52 by ccai
Image text-base: 0x80008124, data-base: 0x807E44CC
ROM: System Bootstrap, Version 12.2(4r)XL, RELEASE SOFTWARE (fc1)
yangang uptime is 2 years, 30 weeks, 3 days, 1 hour, 26 minutes
System returned to ROM by reload
System image file is "flash:c1700-y-mz.122-11.T1.bin"
cisco 1760 (MPC860P) processor (revision 0x200) with 29492K/3276K bytes of memory.
Processor board ID FOC064108BV (562502672), with hardware revision BB67
MPC860P processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
2 Serial(sync/async) network interface(s)
2 Low-speed serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
show int看到的端口状态住下：
Serial0/0 is up, line protocol is up
Hardware is PowerQUICC Serial
Internet address is 172.28.196.66/30
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
Serial0/1 is up, line protocol is up
Hardware is PowerQUICC Serial
Internet address is 172.28.196.69/30
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
reliability 255/255, txload 19/255, rxload 42/255
Encapsulation HDLC, loopback not set
Serial1/0 is up, line protocol is up
Hardware is PowerQUICC Serial
Internet address is 172.28.198.74/30
MTU 1500 bytes, BW 128 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 247/255
Encapsulation HDLC, loopback not set
Serial1/1 is up, line protocol is up
Hardware is PowerQUICC Serial
Internet address is 172.29.211.73/30
MTU 1500 bytes, BW 128 Kbit, DLY 20000 usec,
reliability 255/255, txload 247/255, rxload 33/255
Encapsulation HDLC, loopback not set
1760#sho diag
Slot 0:
C1760 1FE VE 4SLOT DV Mainboard Port adapter, 5 ports
Port adapter is analyzed
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
Hardware Revision : 2.0
PCB Serial Number : FOC064108BV
Part Number : 73-7167-02
Board Revision : C0
Deviation Number : 0-47975
Fab Version : 04
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 03 16 41 02 00 C1 8B 46 4F 43 30 36 34
0x10: 31 30 38 42 56 82 49 1B FF 02 42 43 30 80 00 00
0x20: BB 67 02 04 FF FF FF FF FF FF FF FF FF FF FF FF
0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
WIC/VIC Slot 0:
Serial 2T (12in1)
Hardware revision 1.0 Board revision D0
Serial number 0024046683 Part number 800-03181-01
Test history 0x00 RMA number 00-00-00
Connector type PCI
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 12 01 00 01 6E EC 5B 50 0C 6D 01 00 00 00 00
0x30: 68 00 00 00 00 09 02 00 FF FF FF FF FF FF FF FF
WIC/VIC Slot 1:
Serial 2A/S (12in1)
Hardware revision 1.0 Board revision C0
Serial number 0721489018 Part number 800-03182-01
Test history 0x00 RMA number 00-00-00
Connector type PCI
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 13 01 00 2B 01 0C 7A 50 0C 6E 01 00 00 00 00
0x30: 60 00 00 00 00 05 07 00 FF FF FF FF FF FF FF FF
