wuhao0015 发表于 2019-5-28 14:00
再apciscoshell下敲ap-type mobility-express tftp://x.x.x.x/x.tar
回复信息是这个:
PE00E.DA99.8AD0#ap-type mobility-express tftp://192.168.2.102/ap3g3
Image upgrade not needed, changing AP Type to Mobility Express
Writing reload timestamp (Tue May 28 02:32:18 UTC 2019) to disk
APE00E.DA99.8AD0#failed to unmount /storage; waiting 1s and trying again.
[05/28/2019 02:32:22.6200] reboot: Restarting system
BootROM - 1.78
Booting from SPI flash, Secure mode
BootROM: RSA Public key verification PASSED
BootROM: CSK block signature verification PASSED
BootROM: Boot header signature verification PASSED
BootROM: Box ID verification PASSED
BootROM: JTAG is disabled
cisco AIR-AP2802I-B-K9 ARMv7 Processor rev 1 (v7l) with 1030528/475176K bytes of--More memory.
Processor board ID FDW2027D12L
AP Running Image : 8.3.102.0
Primary Boot Image : 8.3.102.0
Backup Boot Image : 8.2.130.0
AP Image type : MOBILITY EXPRESS IMAGE
AP Configuration : MOBILITY EXPRESS CAPABLE
2 Gigabit Ethernet interfaces
2 802.11 Radios
Radio Driver version : 9.0.5.5-W8964
Radio FW version : 9.1.8.1
NSS FW version :
Base ethernet MAC Address :*******
Part Number :******
PCA Assembly Number : 000-00000-00
PCA Revision Number :
PCB Serial Number : ********
Top Assembly Part Number :*******
Top Assembly Serial Number : *******
Top Revision Number : A0
Product/Model Number : AIR-AP2802I-B-K9