请选择 进入手机版 | 继续访问电脑版

设为首页 收藏本站
思科社区 关注
思科社区

搜索
热搜: 邮件服务器
查看: 506|回复: 13

【求助】关于ISR4451-X/K9 (2RU)使用不定时重启问题疑问

[复制链接]
发表于 2019-12-23 11:32:07 | 显示全部楼层 |阅读模式
0可用金钱
各路大神好,最近遇到一个问题,超出自己知识范围,特来求助。
Parameter map cws-tunnel global not configuredcisco ISR4451-X/K9 (2RU) processor with 1647778K/6147K bytes of memory.
Processor board ID FT***
4 Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
7341807K bytes of flash memory at bootflash:.


这么一台设备,从11月开始,一接办公网络,就不定时重启,查看深信服,大概带机量在400-500之间,
但日常查看CPU 内存也没啥异常,但就是不定时重启。
这台设备19年已经修两次了,联系供应商,也说没遇到类似情况,现在还拖着
然后一直用着备用路由,备用路由CPU平均值80%左右,好怕出问题。

请各路大神协助解答一下?小弟不胜感激,仅有的22金币虽说不多,但也表达个心意,如数奉上
大概拓扑如图:

  1. ASR4451#sh log
  2. Syslog logging: enabled (0 messages dropped, 10 messages rate-limited, 0 flushes, 0 overruns, xml disabled, filtering disabled)

  3. No Active Message Discriminator.



  4. No Inactive Message Discriminator.


  5.     Console logging: level warnings, 14 messages logged, xml disabled,
  6.                      filtering disabled
  7.     Monitor logging: level debugging, 0 messages logged, xml disabled,
  8.                      filtering disabled
  9.     Buffer logging:  level warnings, 14 messages logged, xml disabled,
  10.                     filtering disabled
  11.     Exception Logging: size (4096 bytes)
  12.     Count and timestamp logging messages: disabled
  13.     Persistent logging: disabled

  14. No active filter modules.

  15.     Trap logging: disabled
  16.          
  17. Log Buffer (4096 bytes):

  18. *Nov 11 08:14:30.421: %LINK-3-UPDOWN: Interface Lsmpi0, changed state to up
  19. *Nov 11 08:14:30.421: %LINK-3-UPDOWN: Interface EOBC0, changed state to up
  20. *Nov 11 08:14:30.421: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed state to down
  21. *Nov 11 08:14:30.425: %LINK-3-UPDOWN: Interface LIIN0, changed state to up
  22. *Nov 11 16:14:35.296 Beijing: %SPA-3-ENVMON_NOT_MONITORED:iomd:  Environmental monitoring is not enabled for ISR4451-X-4x1GE[0/0]
  23. *Nov 11 16:14:35.430 Beijing: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to up
  24. *Nov 11 16:14:41.870 Beijing: %LINK-3-UPDOWN: Interface GigabitEthernet0/0/0, changed state to down
  25. *Nov 11 16:14:41.877 Beijing: %LINK-3-UPDOWN: Interface GigabitEthernet0/0/1, changed state to down
  26. *Nov 11 16:14:41.880 Beijing: %LINK-3-UPDOWN: Interface GigabitEthernet0/0/2, changed state to down
  27. *Nov 11 16:14:41.880 Beijing: %LINK-3-UPDOWN: Interface GigabitEthernet0/0/3, changed state to down
  28. *Nov 11 16:14:55.393 Beijing: %LINK-3-UPDOWN: Interface GigabitEthernet0/0/1, changed state to up
  29. *Nov 11 16:14:57.394 Beijing: %LINK-3-UPDOWN: Interface GigabitEthernet0/0/3, changed state to up
  30. *Nov 11 16:15:05.821 Beijing: %LINK-3-UPDOWN: Interface Virtual-Access2, changed state to up
  31. *Nov 11 16:15:05.825 Beijing: %LINK-3-UPDOWN: Interface Virtual-Access3, changed state to up
复制代码
  1. ASR4451#sh run        
  2. Building configuration...


  3. Current configuration : 5215 bytes
  4. !
  5. version 15.5
  6. service timestamps debug datetime msec localtime show-timezone
  7. service timestamps log datetime msec localtime show-timezone
  8. service password-encryption
  9. no platform punt-keepalive disable-kernel-core
  10. !
  11. hostname ASR4451
  12. !
  13. boot-start-marker
  14. boot system flash:isr4400-universalk9.03.16.08.S.155-3.S8-ext.SPA.bin
  15. boot system flash isr4400-universalk9.0
  16. boot system flash bootflash:/isr4400-universalk9.03.16.08.S.155-3.S8-ext.SPA.bin
  17. boot-end-marker
  18. !
  19. !
  20. vrf definition Mgmt-intf
  21. !
  22. address-family ipv4
  23. exit-address-family
  24. !
  25. address-family ipv6
  26. exit-address-family
  27. !
  28. logging buffered warnings
  29. logging console warnings

  30. !
  31. no aaa new-model
  32. clock timezone Beijing 8 0
  33. !
  34. !
  35. !
  36. !
  37. !
  38. login block-for 600 attempts 4 within 60
  39. !
  40. !
  41. !
  42. !         
  43. !
  44. !
  45. !
  46. subscriber templating
  47. !
  48. multilink bundle-name authenticated
  49. !
  50. license udi pid ISR4451-X/K9 sn
  51. !
  52. spanning-tree extend system-id
  53. !
  54. !
  55. redundancy
  56. mode none
  57. !
  58. no cdp run
  59. !
  60. track 10 interface GigabitEthernet0/0/2 line-protocol
  61. !
  62. track 20 interface GigabitEthernet0/0/1 line-protocol
  63. !
  64. track 30 interface GigabitEthernet0/0/3 line-protocol
  65. !
  66. interface Loopback0
  67. ip address 192.168.*.1 255.255.255.0
  68. !
  69. interface Loopback1
  70. no ip address
  71. !
  72. interface GigabitEthernet0/0/0
  73. ip address 192.168.*.1 255.255.255.0
  74. negotiation auto
  75. !
  76. interface GigabitEthernet0/0/1
  77. no ip address
  78. ip nat outside
  79. ip access-group port_445_5938 in
  80. negotiation auto
  81. pppoe enable group 1
  82. pppoe-client dial-pool-number 1
  83. ip virtual-reassembly
  84. !
  85. interface GigabitEthernet0/0/2
  86. no ip address
  87. ip nat outside
  88. ip access-group port_445_5938 in
  89. negotiation auto
  90. pppoe enable group 2
  91. pppoe-client dial-pool-number 2
  92. ip virtual-reassembly
  93. !
  94. interface GigabitEthernet0/0/3
  95. no ip address
  96. ip nat outside
  97. ip access-group port_445_5938 in
  98. negotiation auto
  99. pppoe enable group 3
  100. pppoe-client dial-pool-number 3
  101. ip virtual-reassembly
  102. !
  103. interface GigabitEthernet0
  104. vrf forwarding Mgmt-intf
  105. no ip address
  106. shutdown
  107. negotiation auto
  108. !
  109. interface Dialer0
  110. description adsl-dianxin200
  111. ip address negotiated
  112. ip nat outside
  113. encapsulation ppp
  114. ip tcp adjust-mss 1440
  115. dialer pool 1
  116. dialer idle-timeout 0
  117. dialer-group 1
  118. ppp authentication pap callin
  119. ppp pap sent-username *
  120. ppp ipcp dns request
  121. !
  122. interface Dialer1
  123. description adsl-dianxin500
  124. ip address negotiated
  125. ip nat outside
  126. encapsulation ppp
  127. ip tcp adjust-mss 1440
  128. dialer pool 2
  129. dialer idle-timeout 0
  130. dialer-group 2
  131. ppp authentication pap callin
  132. ppp pap sent-username *
  133. !
  134. interface Dialer2
  135. description adsl-liantong200
  136. ip address negotiated
  137. ip nat outside
  138. encapsulation ppp
  139. ip tcp adjust-mss 1440
  140. dialer pool 3
  141. dialer idle-timeout 0
  142. dialer-group 3
  143. ppp authentication pap callin
  144. ppp pap sent-username *
  145. ppp ipcp dns request
  146. ip virtual-reassembly max-reassemblies 1024
  147. !
  148. ip nat inside source route-map to_D0 interface Dialer0 overload
  149. ip nat inside source route-map to_D1 interface Dialer1 overload
  150. ip nat inside source route-map to_D2 interface Dialer2 overload
  151. ip forward-protocol nd
  152. no ip http server
  153. no ip http secure-server
  154. ip tftp source-interface GigabitEthernet0
  155. ip route 0.0.0.0 0.0.0.0 Dialer1 track 10
  156. ip route 0.0.0.0 0.0.0.0 Dialer0 10
  157. ip route 0.0.0.0 0.0.0.0 Dialer2 20
  158. ip route 192.168.0.0 255.255.0.0 192.168.20.2
  159. ip ssh authentication-retries 5
  160. ip ssh version 2
  161. !
  162. !
  163. ip access-list extended NAT_D0
  164. permit ip 192.168.0.0 0.0.255.255 any
  165. ip access-list extended NAT_D1
  166. permit ip 192.168.0.0 0.0.255.255 any
  167. ip access-list extended NAT_D2
  168. permit ip 192.168.0.0 0.0.255.255 any
  169. ip access-list extended out_D0
  170. permit ip 192.168.100.0 0.0.0.255 any
  171. permit ip 192.168.*.0 0.0.0.255 any
  172. permit ip 192.168.*.0 0.0.0.255 any
  173. permit ip 192.168.*.0 0.0.0.255 any
  174. permit ip 192.168.*.0 0.0.0.255 any
  175. ip access-list extended out_D2
  176. permit ip 192.168.*.0 0.0.0.255 any
  177. permit ip 192.168.*.0 0.0.0.255 any
  178. ip access-list extended port_445_5938
  179. deny   tcp any any eq 445
  180. deny   tcp any any eq 5938
  181. permit ip any any
  182. !
  183. no logging trap
  184. logging source-interface Loopback0
  185. logging host 192.168*
  186. access-list 90 permit 192.168*
  187. access-list 90 permit 192.168*
  188. !
  189. route-map to_D0 permit 10
  190. match ip address NAT_D0
  191. match interface Dialer0
  192. !
  193. route-map to_D1 permit 10
  194. match ip address NAT_D1
  195. match interface Dialer1
  196. !
  197. route-map to_D2 permit 10
  198. match ip address NAT_D2
  199. match interface Dialer2
  200. !
  201. route-map out_D0 permit 10
  202. match ip address out_D0
  203. match track  20
  204. set default interface Dialer0
  205. !
  206. route-map out_D0 permit 20
  207. match ip address out_D2
  208. match track  30
  209. set default interface Dialer2
  210. !
  211. !
  212. control-plane
  213. !
  214. !
  215. line con 0
  216. exec-timeout 3 0
  217. logging synchronous
  218. stopbits 1
  219. line aux 0
  220. stopbits 1
  221. line vty 0 4
  222. exec-timeout 20 0
  223. privilege level 15
  224. login local
  225. transport input ssh
  226. line vty 5 15
  227. login local
  228. transport input ssh
  229. !
  230. end
复制代码
  1. ASR4451# sh processes cpu
  2. CPU utilization for five seconds: 0%/0%; one minute: 0%; five minutes: 0%
  3. PID Runtime(ms)     Invoked      uSecs   5Sec   1Min   5Min TTY Process
  4. PID Runtime(ms)     Invoked      uSecs   5Sec   1Min   5Min TTY Process
  5.    1           3          33         90  0.00%  0.00%  0.00%   0 Chunk Manager   
  6.    2          18          81        222  0.00%  0.00%  0.00%   0 Load Meter      
  7.    3           0           2          0  0.00%  0.00%  0.00%   0 SSH Event handle
  8.    4           0           1          0  0.00%  0.00%  0.00%   0 Retransmission o
  9.    5           0           1          0  0.00%  0.00%  0.00%   0 IPC ISSU Dispatc
  10.    6           5          12        416  0.00%  0.00%  0.00%   0 RF Slave Main Th
  11.    7           0           1          0  0.00%  0.00%  0.00%   0 EDDRI_MAIN      
  12.    8           0           1          0  0.00%  0.00%  0.00%   0 RO Notify Timers
  13.    9          87          54       1611  0.00%  0.01%  0.00%   0 Check heaps      
  14.   10           0           9          0  0.00%  0.00%  0.00%   0 Pool Manager     
  15.   11           0           1          0  0.00%  0.00%  0.00%   0 DiscardQ Backgro
  16. PID Runtime(ms)     Invoked      uSecs   5Sec   1Min   5Min TTY Process
  17.   12           0           2          0  0.00%  0.00%  0.00%   0 Timers           
  18.   13           0          20          0  0.00%  0.00%  0.00%   0 WATCH_AFS        
  19.   14           0           1          0  0.00%  0.00%  0.00%   0 MEMLEAK PROCESS  
  20.   15           2           5        400  0.00%  0.00%  0.00%   0 ARP Input        
  21.   16           8         440         18  0.00%  0.00%  0.00%   0 ARP Background   
  22.   17           0           2          0  0.00%  0.00%  0.00%   0 ATM Idle Timer   
  23.   18           0           1          0  0.00%  0.00%  0.00%   0 ATM ASYNC PROC   
  24.   19           0           1          0  0.00%  0.00%  0.00%   0 CEF MIB API      
  25.   20           0           1          0  0.00%  0.00%  0.00%   0 AAA_SERVER_DEADT
  26.   21           0           1          0  0.00%  0.00%  0.00%   0 Policy Manager   
  27.   22           1          28         35  0.00%  0.00%  0.00%   0 DDR Timers      
复制代码
  1. ASR4451#sh processes memory
  2. Processor Pool Total: 1687325248 Used:  284327624 Free: 1402997624
  3. lsmpi_io Pool Total:    6295128 Used:    6294296 Free:        832

  4. PID TTY  Allocated      Freed    Holding    Getbufs    Retbufs Process
  5.    0   0  423479288  168386280  237274936        686        799 *Init*         
  6.    0   0        360     257952        360          0          0 *Sched*         
  7.    0   0     844776     337976     446416          1          1 *Dead*         
  8.    0   0          0          0     395600          0          0 *MallocLite*   
  9.    1   0    2089280          0    2119144          0          0 Chunk Manager   
  10.    2   0        448        448      17864          0          0 Load Meter      
  11.    3   0       8696          0      38464          2          2 SSH Event handle
  12.    4   0          0          0      29864          0          0 Retransmission o
  13.    5   0          0          0      29864          0          0 IPC ISSU Dispatc
  14.    6   0     528368      22648     463560          0          0 RF Slave Main Th
  15.    7   0      65632          0     167496          0          0 EDDRI_MAIN      
  16.    8   0          0          0      29864          0          0 RO Notify Timers
  17.    9   0       6240        448      35656          0          0 Check heaps     
  18.   10   0     562688     548864     112296         51          0 Pool Manager   
  19.   11   0          0          0      29864          0          0 DiscardQ Backgro
  20.   12   0        448        448      29864          0          0 Timers         
  21.   13   0          0          0      17864          0          0 WATCH_AFS      
  22.   14   0          0          0      29864          0          0 MEMLEAK PROCESS
  23.   15   0          0          0      29864          9          9 ARP Input      
复制代码
  1. ASR4451#sh log uptime
  2. Slot              Reset reason  Power On                  
  3. ---------------------------------------------------------                     
  4.     0      reset local software  07/19/19 11:36:52         
  5.     0      reset local software  07/19/19 12:04:47         
  6.     0      reset local software  10/23/19 09:39:28         
  7.     0      reset local software  10/24/19 09:29:06         
  8.     0      reset local software  11/02/19 17:59:08         
  9.     0      reset local software  11/02/19 19:01:01         
  10.     0      reset local software  11/03/19 04:08:53         
  11.     0      reset local software  11/03/19 11:05:09         
  12.     0      reset local software  11/03/19 16:23:54         
  13.     0      reset local software  11/04/19 02:57:56         
  14.     0      reset local software  11/04/19 10:38:26         
  15.     0      reset local software  11/04/19 14:11:46         
  16.     0      reset local software  11/05/19 12:15:55         
  17.     0      reset local software  11/05/19 12:24:53         
  18.     0      reset local software  11/05/19 12:31:36         
  19.     0      reset local software  11/05/19 14:12:36         
  20.     0      reset local software  11/05/19 14:36:20         
  21.     0      reset local software  11/05/19 14:54:20         
  22.     0      reset local software  11/09/19 08:28:54         
  23.     0      reset local software  11/11/19 09:24:28         
  24.     0      reset local software  11/11/19 13:19:15         
  25.     0      reset local software  11/11/19 16:13:50         
  26.     0      reset local software  11/12/19 09:21:09         
  27.     0      reset local software  11/14/19 18:18:27         
  28.     0      reset local software  11/29/19 10:08:06         
  29.     0      reset local software  01/01/10 08:02:34         
  30.     0      reset local software  01/01/10 08:15:53         
  31.     0      reset local software  01/01/10 08:45:06         
  32.     0      reset local software  01/01/10 08:58:54         
  33.     0            reset power on  01/04/10 07:23:51         
  34.     0            reset power on  01/06/10 04:13:23         
  35.     0            reset power on  01/06/10 06:42:11         
  36.     0            reset power on  01/11/10 07:56:48         
  37.     0      reset local software  12/19/19 13:46:54         
  38.     0      reset local software  12/19/19 15:18:48         
  39.     0      reset local software  12/19/19 15:39:55         
  40.     0      reset local software  12/19/19 16:01:15         
  41.     0      reset local software  12/19/19 17:13:57         
  42.     0      reset local software  12/19/19 19:13:16         
  43.     0      reset local software  12/20/19 08:44:12         
  44.     0      reset local software  12/20/19 09:57:44         
  45.     0      reset local software  12/20/19 10:42:10   
复制代码


附件: 您需要 思科 CCO 登录 才可以下载或查看,没有帐号?思科 CCO 注册
  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分0 (0 评价)
发表于 2019-12-23 13:23:45 | 显示全部楼层
1、show ver 信息是什么?
2、dir 检查 flash目录,看是不是有CoreDump 文件存在
  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分0 (0 评价)
发表于 2019-12-23 13:25:51 | 显示全部楼层
另外,为什么一定要把路由器顶在最外面,用于连接互联网呢?
防火墙直连不行么?
多线路负载均衡可以考虑直接上个负截均衡设备
  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分0 (0 评价)
 楼主| 发表于 2019-12-23 13:36:38 | 显示全部楼层
YilinChen 发表于 2019-12-23 13:23
1、show ver 信息是什么?
2、dir 检查 flash目录,看是不是有CoreDump 文件存在

感谢大佬提醒,请帮忙查看,好像是有生成dump

ASR4451#sh ver
Cisco IOS XE Software, Version 03.16.08.S - Extended Support Release
Cisco IOS Software, ISR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.5(3)S8, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Wed 08-Aug-18 10:48 by mcpre


Cisco IOS-XE software, Copyright (c) 2005-2018 by cisco Systems, Inc.
All rights reserved.  Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0.  The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY.  You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0.  For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.


ROM: IOS-XE ROMMON

ASR4451 uptime is 3 days, 2 hours, 51 minutes
Uptime for this control processor is 3 days, 2 hours, 52 minutes
System returned to ROM by reload
System image file is "bootflash:/isr4400-universalk9.03.16.08.S.155-3.S8-ext.SPA.bin"
Last reload reason: Critical software exception, check bootflash:crashinfo_RP_00_00_20191220-103738-Beijing



This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

         

Suite License Information for Module:'esg'

--------------------------------------------------------------------------------
Suite                 Suite Current         Type           Suite Next reboot     
--------------------------------------------------------------------------------
FoundationSuiteK9     None                  None           None                  
securityk9
appxk9

AdvUCSuiteK9          None                  None           None                  
uck9
cme-srst
cube


Technology Package License Information:

-----------------------------------------------------------------
Technology    Technology-package           Technology-package
              Current       Type           Next reboot  
------------------------------------------------------------------
appxk9           None             None             None
uck9             None             None             None
securityk9       securityk9       Permanent        securityk9
ipbase           ipbasek9         Permanent        ipbasek9

cisco ISR4451-X/K9 (2RU) processor with 1647778K/6147K bytes of memory.
Processor board ID FT**
4 Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
7341807K bytes of flash memory at bootflash:.

Configuration register is 0x2102

ASR4451#dir fl
ASR4451#dir flash:
Directory of bootflash:/

574561  drwx             4096  Apr 22 2019 15:50:36 +08:00  .rollback_timer
771553  drwx             4096  Dec 20 2019 10:38:54 +08:00  core
   12  -rw-        491568196  Nov 26 2018 14:46:58 +08:00  isr4400-universalk9.03.16.05.S.155-3.S5-ext.SPA.bin
853633  drwx             4096  Dec 20 2019 10:42:47 +08:00  .prst_sync
   11  -rw-                0  Apr 22 2019 15:53:03 +08:00  tracelogs.547
804385  drwx            65536  Dec 21 2019 23:11:48 +08:00  tracelogs
426817  drwx             4096  Apr 22 2019 15:53:04 +08:00  .installer
131329  drwx             4096  Apr 22 2019 15:53:05 +08:00  virtual-instance
   13  -rw-               30  Dec 20 2019 10:42:53 +08:00  throughput_monitor_params
   14  drwx             4096  Apr 25 2019 10:58:46 +08:00  lost+found
   15  -rw-        494675108   Nov 5 2019 12:09:20 +08:00  isr4400-universalk9.03.16.08.S.155-3.S8-ext.SPA.bin
   16  -rw-           241859  Nov 11 2019 16:09:38 +08:00  crashinfo_RP_00_00_20191111-160858-Beijing
   17  -rw-               35  Dec 19 2019 19:15:41 +08:00  pnp-tech-time
   18  -rw-            17613  Dec 19 2019 19:15:49 +08:00  pnp-tech-discovery-summary
   19  -rw-           247943  Dec 20 2019 09:53:47 +08:00  crashinfo_RP_00_00_20191220-095308-Beijing
   20  -rw-           241497  Dec 20 2019 10:38:17 +08:00  crashinfo_RP_00_00_20191220-103738-Beijing

7397990400 bytes total (5552988160 bytes free)
ASR4451#
  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分0 (0 评价)
 楼主| 发表于 2019-12-23 14:20:05 | 显示全部楼层
YilinChen 发表于 2019-12-23 13:25
另外,为什么一定要把路由器顶在最外面,用于连接互联网呢?
防火墙直连不行么?
多线路负载均衡可以考虑 ...

这个架构在我来的时候就已经是这样了,
后期再考虑升级,因为都是拨号的宽带。
按照大佬的意思,这个拓扑还有很大的改善空间哦?
  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分0 (0 评价)
发表于 2019-12-23 14:41:52 | 显示全部楼层
more flash:/crashinfo_RP_00_00_20191220-103738-Beijing
看下里面的信息。
估计是bug。。。
  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分0 (0 评价)
发表于 2019-12-23 15:36:08 | 显示全部楼层
zhihonghan42550 发表于 2019-12-23 13:36
感谢大佬提醒,请帮忙查看,好像是有生成dump

ASR4451#sh ver

Last reload reason: Critical software exception,


check bootflash:crashinfo_RP_00_00_20191220-103738-Beijing


考虑升级版本吧

  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分0 (0 评价)
 楼主| 发表于 2019-12-23 16:47:44 | 显示全部楼层
wuhao0015 发表于 2019-12-23 14:41
more flash:/crashinfo_RP_00_00_20191220-103738-Beijing
看下里面的信息。
估计是bug。。。

是的,4000+行BUG,看不懂,无法分析什么原因导致
  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分0 (0 评价)
 楼主| 发表于 2019-12-23 16:55:11 | 显示全部楼层
YilinChen 发表于 2019-12-23 15:36
Last reload reason: Critical software exception,

11.2无故出现不定时重启,当时的版本是这个S5的,
System image file is "bootflash:/isr4400-universalk9.03.16.05.S.155-3.S5-ext.SPA.bin"

11.5升级后版本
System image file is "bootflash:/isr4400-universalk9.03.16.08.S.155-3.S8-ext.SPA.bin"
但一切换回办公网就会重启,与升级前一样的情况额、
然后 11.15返厂检修,说是一个配件问题,然后更换了。
12.9收到返修的路由器,恢复配置,未接回办公网,正常。
一接回办公网,又不定时重启。
然后就是现在这情况了。
  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分0 (0 评价)
发表于 2019-12-23 17:20:04 | 显示全部楼层
zhihonghan42550 发表于 2019-12-23 16:55
11.2无故出现不定时重启,当时的版本是这个S5的,
System image file is "bootflash:/isr4400-universal ...

不行就改架构吧,防火墙直接顶外面
  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分0 (0 评价)
您需要登录后才可以回帖 思科 CCO 登录 | 思科 CCO 注册   

本版积分规则

Archiver | 思科社区  

GMT+8, 2020-1-25 08:08 , Processed in 0.109491 second(s), 58 queries .

京ICP备09041801号-187

版权所有 :copyright:1992-2019 思科系统  重要声明 | 保密声明 | 隐私权政策 | 商标 |

快速回复 返回顶部 返回列表