本帖最后由 xy411381121 于 2019-12-27 15:26 编辑
设备：ASR1006
版本：15.2(4)S
RP：ASR1000-RP1
ESP：ASR1000-ESP10
SIP：ASR1000-SIP10
SPA：SPA-1XCHSTM1/OC3
年末重启了下路由器，然后就出问题了：

SPA-1XCHSTM1/OC3的STATUS灯灭了，应该是SPA没能上电
主引擎CRIT亮红灯，应该是提示有故障
日志不停告警：
%SPA_EEPROM-3-FIELD_NOT_FOUND: SIP0/0: SPA N/A: Failed to find content of field type 0x40 with data size = 2 bytes. The EEPROM might require an update.
show platform 显示slot 0/0为N/A out of service：
Slot Type State Insert time (ago)
--------- ------------------- --------------------- -----------------
0 ASR1000-SIP10 ok 00:45:26
0/0 N/A out of service never
0/1 SPA-1XCHSTM1/OC3 ok 00:42:57
1 ASR1000-SIP10 ok 00:45:26
1/0 SPA-1XCHSTM1/OC3 ok 00:32:44
1/1 SPA-1XCHSTM1/OC3 ok 00:42:57
1/2 SPA-2X1GE-V2 ok 00:42:57
R0 ASR1000-RP1 ok, active 00:45:26
R1 ASR1000-RP1 ok, standby 00:45:26
F0 ASR1000-ESP10 ok, active 00:45:26
F1 ASR1000-ESP10 ok, standby 00:45:26
P0 ASR1006-PWR-AC ok 00:44:25
P1 ASR1006-PWR-AC ok 00:44:25
我尝试过把其他正常的SPA-1XCHSTM1/OC3与slot0/0的互换，发现不是SPA-1XCHSTM1/OC3模块的问题，只要是安装到slot0/0的模块，STATUS指示灯都不会亮，且都会日志告警
请问，这是重启路由器后，slot0/0槽位硬件故障了吗？怎么消除告警呢？