YilinChen 发表于 2020-4-23 14:55
是胖AP么？ 不需要在物理接口下配置IP，胖AP 物理口默认是绑在BVI接口下通信的，所以如果要手动指定 AP的IP ...

LingJiang81426 发表于 2020-4-24 09:56
是胖的，但是好像没有bvi接口，我看信息里面是ethernet_port_wired0这个接口获取了IP地址，这个接口怎么 ...

(Cisco Controller) >apciscoshell
!!Warning!!: You are entering ap shell. This will stop you from establishing new telnet/SSH/Web sessions to controller.
 Also the exsisting sessions will be suspended till you exit the ap shell.
 To exit the ap shell, use 'logout'
User Access Verification
Username: admin
Password:
AP1852>ena
Password:
AP1852#
AP1852#
AP1852#capwap ap ip 1.1.1.234 255.255.255.0 1.1.1.1
AP1852#
AP1852#
AP1852#show ip int brief
Interface  IP-Address      Method   Status                 Protocol   Speed      Duplex
wired0     1.1.1.234 static up                     up         1000       full
wired1     n/a             n/a      down                   up         n/a        n/a
wifi0      n/a             n/a      up                     up         n/a        n/a
wifi1      n/a             n/a      up                     up         n/a        n/a
AP1852#
AP1852#
AP1852#logout
AP1852>logout
(Cisco Controller) >

haifeli 发表于 2020-4-24 11:04