请选择 进入手机版 | 继续访问电脑版

设为首页 收藏本站
思科社区 关注
思科社区

搜索
热搜: 邮件服务器
查看: 478|回复: 4

2960x许可问题

[复制链接]
发表于 2020-7-10 10:30:09 | 显示全部楼层 |阅读模式
0可用金钱
2960x一直用得好好的, 突然 有一天断电重起后,就出现下面的信息:
LET-1-AUTHENTICATION_FAIL: This Switch may not have been manufactured by Cisco or with Cisco's authorization.  This product may contain s
oftware that was copied in violation of Cisco's license terms.  If your use of this product is the cause of a support issue, Cisco may deny operation of the product, support under your warranty or under a Cisco technical support program such as Smartnet.  Please contact Cisco's Technical Assistance Center for more information.


重启,拨电源等操作全用过了, 还是出现这样的信息, 致使下面的电脑不能正常工作

有什么办法不

  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分0 (0 评价)
发表于 2020-7-10 12:53:51 | 显示全部楼层
https://www.cisco.com/c/en/us/support/docs/switches/catalyst-2960-x-series-switches/118837-technote-catalyst-00.html
  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分0 (0 评价)
发表于 2020-7-11 09:32:15 | 显示全部楼层
Issue 2
The hardware defect in Cisco bug ID CSCuu00752 applies specifically to the FlexStack Plus module (C2960X-STACK=) only. These errors might be seen when a 2960X is booted up with an affected Flexstack Plus module. Note that this issue affects less than 0.03% of the install base.

"POST: ACT2 Authentication : End, Status Passed FlexStack Module SmartChip Authentication Failed". Note that POST is the "Power On Self Test" that is run when the switch boots up. ACT2 is the Smart Chip responsible for hardware authentication.
"%ILET-1-DEVICE_AUTHENTICATION_FAIL: The FlexStack Module inserted in this switch might not have been manufactured by Cisco or with Cisco's authorization. If your use of this product is the cause of a support issue, Cisco might deny operation of the product, support under your warranty or under a Cisco technical support program such as Smartnet. Please contact Cisco's Technical Assistance Center (TAC) for more information."

Solution:
Issue 2
Ensure that the solution for issue 1 is in place.
If the FlexStack ILET message continues then the FlexStack Plus module (C2960X-STACK=) needs to be replaced. Field Notice 63972 can be used in order to proactively help identify specific FlexStack Plus module serial numbers that are impacted by Cisco bug ID CSCuu00752 and also provides the procedure to get them replaced. Note that this issue affects less than 0.03% of the install base.


Issue 3
A C2960X-FIBER-STK or C2960X-HYBRID-STK FlexStack Extended module may experience the following ILET error if the C2960X switch the module is installed in is running software earlier then 15.2(6)E. 15.2(6)E or newer software is the minimum software required to support these 2 module types.

"%ILET-1-DEVICE_AUTHENTICATION_FAIL: The FlexStack Module inserted in this switch might not have been manufactured by Cisco or with Cisco's authorization. If your use of this product is the cause of a support issue, Cisco might deny operation of the product, support under your warranty or under a Cisco technical support program such as Smartnet. Please contact Cisco's Technical Assistance Center for more information."

Solution
Issue 3
Ensure that 15.2(6)E or newer software is running on the C2960X switch the C2960X-FIBER-STK or C2960X-HYBRID-STK FlexStack Extended module is installed in. This is the minimum software required to support these 2 module types.

Workarounds
Issue 2
None
Issue 3
None
https://www.cisco.com/c/en/us/su ... te-catalyst-00.html
  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分0 (0 评价)
发表于 2020-7-12 11:05:36 | 显示全部楼层
排除交换机上插有OEM模块,那就是交换机非行货导致,找经销商
  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分0 (0 评价)
发表于 2020-7-15 22:34:16 | 显示全部楼层
盗版系统,A没有通过思科的认证
  • 1
  • 2
  • 3
  • 4
  • 5
  • 1
  • 2
  • 3
  • 4
  • 5
平均得分0 (0 评价)
您需要登录后才可以回帖 思科 CCO 登录 | 思科 CCO 注册   

本版积分规则

Archiver | 思科社区  

GMT+8, 2020-8-6 00:13 , Processed in 0.086767 second(s), 38 queries .

京ICP备11014401号-17

© 2020 思科系统.版权所有 重要声明 | 保密声明 | 隐私权政策 | 商标 |

快速回复 返回顶部 返回列表