AP1832i刚刚刷成Mobility Express就关机

sufee · ‎01-22-2021

AP1832i-E刚刷成Mobility Express，用管理口地址登录机器就自动关机了，POE千兆交换机供电AP，网线重新AP1852i POE接口机器不能开机了，请问是怎么回事？

Starting IPSec Profiles component: ok

Starting CPU ACL Logging services: ok

Enabling Controller Provisioning

Configuring management interface

Cleaning up Provisioning SSID

Applying mgmt ip addr 192.168.10.125netmask 255.255.255.0 gateway 192.168.10.1

As the Mgmt Address is updated, all theDHCP scopes with Central NAT enabled will be disabled and enabled

As the Mgmt Address is updated, all theWLANs associated with central NAT enabled scopes will be enabled and disabled

Enabling mgmt via wireless

EnablingProvisioning SSID

SSID: CiscoAirProvision, Admin Status: 1,Interface Name: management, 802.11 Auth: WPA2-PSK, Wi-Fi Protected Access : Enabled

(Cisco Controller)

Cisco Aironet 1830 Series Mobility Express

Welcome to the Cisco Wizard ConfigurationTool

Use the '-' character to backup

Would you like to terminate autoinstall?[yes]: Can't open format specifier database File:No such file or directory at/bsn/xml2cli_optimized line 43.

yes

Enter Administrative User Name (24characters max):

Enter Administrative Password (3 to 24characters):

Re-enter Administrative Password :

System Name [Cisco_30:47:00] (31 charactersmax):

Enter Country Code list (enter 'help' for alist of countries) [US]: us

Configure a NTP server now? [YES][no]: no

Configure the system time now? [YES][no]:yes

Enter the date in MM/DD/YY format: 01/23/21

Enter the time in HH:MM:SS format: 12:30:00

Enter timezone location index (enter 'help'for a list of timezones): help

1. (GMT-12:00) International Date LineWest 2. (GMT-11:00) Samoa

3.(GMT-10:00) Hawaii 4. (GMT -9:00)Alaska

5.(GMT -8:00) Pacific Time (US and Canada) 6. (GMT -7:00) Mountain Time (US andCanada)

7.(GMT -6:00) Central Time (US and Canada) 8. (GMT -5:00) Eastern Time (US andCanada)

9.(GMT -4:00) Altantic Time (Canada) 10. (GMT -3:00) Buenos Aires (Agentina)

11.(GMT -2:00) Mid-Atlantic 12. (GMT -1:00) Azores

13.(GMT) London, Lisbon, Dublin, Edinburgh 14. (GMT +1:00) Amsterdam, Berlin, Rome, Vienna

15.(GMT +2:00) Jerusalem 16. (GMT +3:00) Baghdad

17.(GMT +4:00) Muscat, Abu Dhabi 18. (GMT +4:30) Kabul

19.(GMT +5:00) Karachi, Islamabad, Tashkent 20. (GMT +5:30) Colombo, Kolkata, Mumbai, New Delhi

21.(GMT +5:45) Katmandu 22. (GMT +6:00) Almaty, Novosibirsk

23.(GMT +6:30) Rangoon 24. (GMT +7:00) Saigon, Hanoi,Bangkok, Jakatar

25.(GMT +8:00) HongKong, Beijing, Chongqing 26. (GMT +9:00) Tokyo, Osaka, Sapporo

27.(GMT +9:30) Darwin 28. (GMT+10:00) Sydney, Melbourne, Canberra

29.(GMT+11:00) Magadan, Solomon Is., New Caledonia 30. (GMT+12:00) Kamchatka, Marshall Is., Fiji

31.(GMT+12:00) Auckland (New Zealand) 32. (GMT+10:30) Adelaide, South Australia

Enter timezone location index (enter 'help'for a list of timezones): 25

Management Interface IP AddressConfiguration [STATIC][dhcp]: static

Management Interface IP Address:

Management Interface Netmask: 255.255.255.0

Management Interface Default Router:

Cleaning up Provisioning SSID

As the Mgmt Address is updated, all theDHCP scopes with Central NAT enabled will be disabled and enabled

As the Mgmt Address is updated, all theWLANs associated with central NAT enabled scopes will be enabled and disabled

Create Management DHCP Scope? [yes][NO]: no

Employee Network Name (SSID)?: Cisco-AP

Employee Network Security?[PSK][enterprise]: psk

Employee PSK Passphrase (8-63 characters)?:

Re-enter Employee PSK Passphrase:

Enable RF Parameter Optimization?[YES][no]: yes

Client Density [TYPICAL][Low][High]:typical

Traffic with Voice [NO][Yes]: no

Configuration correct? If yes, system willsave it and reset. [yes][NO]: yes

Cleaning up Provisioning SSID

Configuration saved!

Resetting system with new configuration...

Writing reload timestamp (Sat Jan 2312:36:44 UTC 2021) to disk

[01/23/2021 12:36:46.6729] UBIFS: un-mountUBI device 0, volume 3

[01/23/2021 12:36:47.5726] Restartingsystem.

[01/23/2021 12:36:47.6026] Going down forrestart now

U-Boot 2012.07 (btldr release 30) (Mar 032017 - 19:13:24)

This product contains some softwarelicensed under the

"GNU General Public License, version2" provided with

ABSOLUTELY NO WARRANTY under the terms of

"GNU General Public License, version2", available here:

http://www.gnu.org/licenses/old-licenses/gpl-2.0.html

DRAM: 1 GiB

NAND (ONFI): Detected SPANSION S34MS02G2[256 MiB]

SF: Detected Macronix MX25U3235F [4 MiB]

MFG data loaded

Scanning shenv data blocks

Total valid parts=4

Active shenv part[1:1], write_counter=12

PCI0 Link Intialized

PCI1 Link Intialized

Net:

PHY ID = 0x4dd074, eth0 found AR8033 PHY

PHY ID = 0x4dd074, eth1 found AR8033 PHY

Valid I2C chip addresses: 51 52

AP 1832 . detected...

Power Type: 802.3af POE or Othersdetected...

Signature returns 0

BL signing verification success, continueto run...

Auto boot mode, use bootipq directly

Hit ESC key to stop autoboot: 0

Specified BOOT: part1

Booting from part1

Read 1024 bytes from volume part1 to45000000

Read 44552564 bytes from volume part1 to 45000000

Signature returns 0

Image signing verification success,continue to run...

Using machid 0x1260 from environment

Starting image ...

[01/01/1970 00:00:00.0000] CPU: ARMv7Processor [512f04d0] revision 0 (ARMv7), cr=10c5387d

[01/01/1970 00:00:00.0000] CPU: PIPT / VIPTnonaliasing data cache, PIPT instruction cache

[01/01/1970 00:00:00.0000] Machine: CiscoSystems 11ac Wave2 Wifi Access Point

[01/01/1970 00:00:00.0000] Memory policy:ECC disabled, Data cache writealloc

[01/01/1970 00:00:00.0000] Kernel commandline: ubi.mtd=0 crashkernel=500M-:64M@1280M console=ttyHSL1,9600n8activepart=part1 activeboot=0 wdgtriggered=0

[01/01/1970 00:00:00.1500] CPU1: Bootedsecondary processor

[01/01/1970 00:00:00.2200]

[01/01/1970 00:00:00.2200] +++hydra_ap_gpio_value =2

[01/01/1970 00:00:28.3613] ACPU PVS: 2

[01/01/1970 00:00:30.8705] buginf ttyflushing thread started, ttyport=ef64de90

[*01/01/1970 00:00:37.1285] buginf()enabled.

[*01/01/1970 00:00:37.1385] Made it intobootsh: Feb 18 2020 05:03:39

[*01/01/1970 00:00:37.1385] bootsh buildT-eaf8c9a5819ff90fa88df9b4045e20adf0d0a259-geaf8c9a5-vipendya

Welcome to Cisco.

Usage of this device is governed by Cisco'sEnd User License Agreement,

available at:

http://www.cisco.com/c/en/us/td/docs/general/warranty/English/EU1KEN_.html.

Restricted Rights Legend

Use, duplication, or disclosure by theGovernment is subject to

restrictions as set forth in subparagraph(c) of the Commercial

Computer Software - Restricted Rightsclause at FAR sec. 52.227-19 and

subparagraph (c) (1) (ii) of the Rights inTechnical Data and Computer

Software clause at DFARS sec. 252.227-7013.

Cisco Systems, Inc.

170 West Tasman Drive

San Jose, California 95134-1706

This product contains cryptographicfeatures and is subject to United

States and local country laws governingimport, export, transfer and

use. Delivery of Cisco cryptographicproducts does not imply

third-party authority to import, export,distribute or use encryption.

Importers, exporters, distributors andusers are responsible for

compliance with U.S. and local countrylaws. By using this product you

agree to comply with applicable laws andregulations. If you are unable

to comply with U.S. and local laws, returnthis product immediately.

A summary of U.S. laws governing Ciscocryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance pleasecontact us by sending email to

export@cisco.com.

This product contains some softwarelicensed under the

"GNU General Public License, version2" provided with

ABSOLUTELY NO WARRANTY under the terms of

"GNU General Public License, version2", available here:

http://www.gnu.org/licenses/old-licenses/gpl-2.0.html

This product contains some softwarelicensed under the

"GNU Library General Public License,version 2" provided

with ABSOLUTELY NO WARRANTY under the termsof "GNU Library

General Public License, version 2",available here:

http://www.gnu.org/licenses/old-licenses/lgpl-2.0.html

This product contains some softwarelicensed under the

"GNU Lesser General Public License,version 2.1" provided

with ABSOLUTELY NO WARRANTY under the termsof "GNU Lesser

General Public License, version 2.1",available here:

http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html

This product contains some softwarelicensed under the

"GNU General Public License, version3" provided with

ABSOLUTELY NO WARRANTY under the termsof

"GNU General Public License, Version3", available here:

http://www.gnu.org/licenses/gpl.html.

This product contains some softwarelicensed under the

"GNU Affero General Public License,version 3" provided

with ABSOLUTELY NO WARRANTY under the termsof

"GNU Affero General Public License,version 3", available here:

http://www.gnu.org/licenses/agpl-3.0.html.

init started: BusyBox v1.23.2 (2020-02-1804:38:33 PST)

[*01/01/1970 00:00:40.4675] GCM-128 POSTpassed

[*01/01/1970 00:00:40.4675] GCM-256 POSTpassed

[*01/01/1970 00:00:40.6175] === 5G radio domain is 12, COPY 5G BDF filesfrom ETSI_BDF folder ===

[*01/01/1970 00:00:40.6774] 1

[*01/01/1970 00:00:40.8974] Active version:8.5.161.0

[*01/01/1970 00:00:40.9074] Backup version:8.5.161.0

Jan 1 00:00:40 FIPS[1596]: *** shell: FIPS Mode = disabled ***

User Access Verification

Username: [*01/01/1970 00:00:41.1173]

[*01/01/1970 00:00:41.1173] led pattern module start

[*01/01/1970 00:00:41.1673] AP1832I

[*01/01/1970 00:00:41.2573] nss_driver -Turbo Support 1

[*01/01/1970 00:00:41.2573] SupportedFrequencies - 110Mhz 550Mhz 733Mhz

[*01/01/1970 00:00:41.2972] NSS firmwarebooted

[*01/01/1970 00:00:41.3272] NSS firmwarebooted

[*01/01/1970 00:00:41.7771] Current valueof FACTORY_RESET=0

[*08/02/2017 23:59:59.0000] Last reloadtime: Jan 23 12:36:44 2021

[*01/23/2021 12:36:44.0000] Setting systemtime Sat Jan 23 12:36:44 UTC 2021

[*01/23/2021 12:36:44.0699] device wired0entered promiscuous mode

[*01/23/2021 12:36:44.5098] stile module dpinit successfully

[*01/23/2021 12:36:44.5098] NBARLabel:BLD_V155_3_S_XE316_THROTTLE_LATEST_20180404_162221 NBAR VERSION:modulebuild date: Feb 18 2020 at 05:00:59

[*01/23/2021 12:36:45.1996] miibus geteec86000!

[*01/23/2021 12:36:45.2396]

[*01/23/2021 12:36:45.2396] boot 7 buildT-eaf8c9a5819ff90fa88df9b4045e20adf0d0a259-geaf8c9a5-vipendya board corsica mac70:D3:79:30:47:08

[*01/23/2021 12:36:45.2496] Module:mbedtls .text=0xbf000000 data=0xbf007e18 bss=0xbf008070

[*01/23/2021 12:36:45.2496] Module:aptrace .text=0xbf00c000 data=0xbf018834 bss=0xbf018cc0

[*01/23/2021 12:36:45.2496] Module:led_module .text=0xbf020000 data=0xbf0204e0 bss=0xbf020b48

[*01/23/2021 12:36:45.2496] Module:qca_nss_gmac .text=0xbf024000 data=0xbf02abc4 bss=0xbf02b088

[*01/23/2021 12:36:45.2496] Module:qca_nss_drv .text=0xbf034000 data=0xbf04f9e8 bss=0xbf050798

[*01/23/2021 12:36:45.2496] Module:qca_nss_capwapmgr .text=0xbf071000 data=0xbf075acc bss=0xbf075c20

[*01/23/2021 12:36:45.2496] Module:nssmgrctl .text=0xbf07c000 data=0xbf07d728 bss=0xbf07da4c

[*01/23/2021 12:36:45.2496] Module:proclikefs .text=0xbf083000 data= bss=0xbf083b40

[*01/23/2021 12:36:45.2496] Module:stile_lm_ft .text= data= bss=

[*01/23/2021 12:36:45.2496] Module:stile_lm_dp .text= data= bss=

[*01/23/2021 12:36:45.2496] Module:ipv6 .text=0xbfa12000 data=0xbfa42f40 bss=0xbfa447ec

[*01/23/2021 12:36:45.2496] Module:bonding .text=0xbfa5e000 data=0xbfa6f62c bss=0xbfa6fa58

[*01/23/2021 12:36:45.2496] Module:lowmemorykiller .text=0xbfa7c000 data=0xbfa7c2c0 bss=0xbfa7c44c

[*01/23/2021 12:36:45.2496] Module:qca_nss_profile_drv .text=0xbfa80000 data=0xbfa81320 bss=0xbfa81494

[*01/23/2021 12:36:45.2496] Module:scsi_wait_scan .text= data= bss=

[*01/23/2021 12:36:45.2496] Module:ssdk_reg .text=0xbfa8a000 data= bss=0xbfa8a838

[*01/23/2021 12:36:45.6995] Last reloadreason : 1: reload command

[*01/23/2021 12:36:47.3290]__mm_init_module

[*01/23/2021 12:36:47.3689]

[*01/23/2021 12:36:47.3689]__ol_ath_attach() Allocated scn ee080480

[*01/23/2021 12:36:47.3889] ol_ath_attachinterface_id 0

[*01/23/2021 12:36:47.3889] Chip id: 0x9,chip version: 0x1000000

[*01/23/2021 12:36:47.3889]

[*01/23/2021 12:36:47.3889] Target Version is 1000000

[*01/23/2021 12:36:47.3889]

[*01/23/2021 12:36:47.3889] Flash Download Address c0000

[*01/23/2021 12:36:47.3889]ol_transfer_bin_file: flash data file defined

[*01/23/2021 12:36:47.3889] Cal location[0]: 00000000

[*01/23/2021 12:36:47.3889]

[*01/23/2021 12:36:47.3889] Wifi0 NAND FLASH Select OFFSET 0x1000

[*01/23/2021 12:36:47.4089] qc98xx_verify_checksum:flash checksum passed: 0x509c

[*01/23/2021 12:36:47.4089]ol_transfer_bin_file 3979: Download Flash data len 12064

[*01/23/2021 12:36:47.4289]

[*01/23/2021 12:36:47.4289] Board data initialized

[*01/23/2021 12:36:47.4789] ol_ath_download_firmware:First OTP download and Execute is good address:0xa000 return param 4660

[*01/23/2021 12:36:47.4789]ol_ath_download_firmware:##Board Id 8 , CHIP Id 1

[*01/23/2021 12:36:47.4789]ol_transfer_bin_file: Board Data File download to address=0xc0000 filename=AR900B/hw.2/boardData_AR900B_CUS260_negative_pwr_offset_2G_v2_008.bin

[*01/23/2021 12:36:47.5589]

[*01/23/2021 12:36:47.5589] [Flash] : Ignore Module param

[*01/23/2021 12:36:47.5589]ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0

[*01/23/2021 12:36:47.5789]ol_transfer_bin_file: Downloading firmware file: AR900B/hw.2/athwlan.bin

[*01/23/2021 12:36:48.6885] HTC Rx:insufficient length, got:4 expected =8

[*01/23/2021 12:36:48.6885] Startup Mode-0set

[*01/23/2021 12:36:48.6885] HTCService:0x0300 ep:1 TX flow control disabled

[*01/23/2021 12:36:48.6885] HTCService:0x0100 ep:2 TX flow control disabled

[*01/23/2021 12:36:48.6985]Firmware_Build_Number:70

[*01/23/2021 12:36:48.6985]num_rf_chain:0x00000003 ht_cap_info:0x0000185b vht_cap_info:0x339a79b2 vht_supp_mcs:0x0000ffea

[*01/23/2021 12:36:48.6985]

[*01/23/2021 12:36:48.6985] RES CFG Support wmi_service_bitmap 9778

[*01/23/2021 12:36:48.6985]

[*01/23/2021 12:36:48.6985] Sending Ext resource cfg: HOST PLATFORM as 0and fw_feature_bitmap as 50 to TGT

[*01/23/2021 12:36:48.6985]ol_ath_service_ready_event: sw_cal_support_check_flag: 1

[*01/23/2021 12:36:48.7685]wmi_ready_event_rx: WMI UNIFIED READYevent

[*01/23/2021 12:36:48.7685] htt_h2t_frag_desc_bank_cfg_msg- HTT_H2T_MSG_TYPE_FRAG_DESC_BANK_CFG sent to FW for radio ID = 0

[*01/23/2021 12:36:48.7685] ACS not enabled

[*01/23/2021 12:36:48.7785]ol_ath_thermal_mitigation_attach: --

[*01/23/2021 12:36:48.7785]

[*01/23/2021 12:36:48.7785]__ol_ath_attach() Allocated scn ece80480

[*01/23/2021 12:36:48.7885] ol_ath_attachinterface_id 1

[*01/23/2021 12:36:48.7885] Chip id: 0x9,chip version: 0x1000000

[*01/23/2021 12:36:48.7885]

[*01/23/2021 12:36:48.7885] Target Version is 1000000

[*01/23/2021 12:36:48.7885]

[*01/23/2021 12:36:48.7885] Flash Download Address c0000

[*01/23/2021 12:36:48.7885]ol_transfer_bin_file: flash data file defined

[*01/23/2021 12:36:48.7885] Cal location[1]: 00004000

[*01/23/2021 12:36:48.7885]

[*01/23/2021 12:36:48.7885] wifi1 NAND FLASH Select OFFSET 0x5000

[*01/23/2021 12:36:48.8085]qc98xx_verify_checksum: flash checksum passed: 0x7897

[*01/23/2021 12:36:48.8085]ol_transfer_bin_file 3979: Download Flash data len 12064

[*01/23/2021 12:36:48.8285]

[*01/23/2021 12:36:48.8285] Board data initialized

[*01/23/2021 12:36:48.8785]ol_ath_download_firmware :First OTP download and Execute is good address:0x9c00return param 4660

[*01/23/2021 12:36:48.8785]ol_ath_download_firmware:##Board Id 7 , CHIP Id 1

[*01/23/2021 12:36:48.8785]ol_transfer_bin_file: Board Data File download to address=0xc0000 filename=AR900B/hw.2/boardData_AR900B_CUS239_negative_pwr_offset_5G_v2_007.bin

[*01/23/2021 12:36:48.9584]

[*01/23/2021 12:36:48.9584] [Flash] : Ignore Module param

[*01/23/2021 12:36:48.9584]ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0

[*01/23/2021 12:36:48.9884]ol_transfer_bin_file: Downloading firmware file: AR900B/hw.2/athwlan.bin

[*01/23/2021 12:36:49.6882] FWLOG: [47470]WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0xdeb001, 0x94c, 0x94c, 0x0 )

[*01/23/2021 12:36:49.6882] FWLOG: [47470]WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x94c, 0x94c, 0x0 )

[*01/23/2021 12:36:49.6882] FWLOG: [47470]WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x94c, 0x94c, 0x0 )

[*01/23/2021 12:36:49.6882] FWLOG: [47470]WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x94c, 0x94c, 0x0 )

[*01/23/2021 12:36:50.0881] HTC Rx:insufficient length, got:4 expected =8

[*01/23/2021 12:36:50.0881] Startup Mode-0set

[*01/23/2021 12:36:50.0881] HTCService:0x0300 ep:1 TX flow control disabled

[*01/23/2021 12:36:50.0881] HTCService:0x0100 ep:2 TX flow control disabled

[*01/23/2021 12:36:50.0881]Firmware_Build_Number:70

[*01/23/2021 12:36:50.0881]num_rf_chain:0x00000004 ht_cap_info:0x0000185b vht_cap_info:0x339b79b2 vht_supp_mcs:0x0000ffaa

[*01/23/2021 12:36:50.0881]

[*01/23/2021 12:36:50.0881] RES CFG Support wmi_service_bitmap 9778

[*01/23/2021 12:36:50.0881]

[*01/23/2021 12:36:50.0881] Sending Ext resource cfg: HOST PLATFORM as 0and fw_feature_bitmap as 50 to TGT

[*01/23/2021 12:36:50.0881]ol_ath_service_ready_event: sw_cal_support_check_flag: 1

[*01/23/2021 12:36:50.1581]wmi_ready_event_rx: WMI UNIFIED READYevent

[*01/23/2021 12:36:50.1581]htt_h2t_frag_desc_bank_cfg_msg - HTT_H2T_MSG_TYPE_FRAG_DESC_BANK_CFG sent to FWfor radio ID = 1

[*01/23/2021 12:36:50.1681] acfg_attach:Offload using existing sock ee43a000

[*01/23/2021 12:36:50.1681] ACS not enabled

[*01/23/2021 12:36:50.1681]ol_ath_thermal_mitigation_attach: --

[*01/23/2021 12:36:50.2081] pktlog_init: Initializing Pktlog for AR900B,pktlog_hdr_size = 16

[*01/23/2021 12:36:51.0878] FWLOG: [48857]WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0xdeb001, 0x94c, 0x94c, 0x0 )

[*01/23/2021 12:36:51.0878] FWLOG: [48857]WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x94c, 0x94c, 0x0 )

[*01/23/2021 12:36:51.0878] FWLOG: [48857]WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x94c, 0x94c, 0x0 )

[*01/23/2021 12:36:51.0878] FWLOG: [48857]WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x94c, 0x94c, 0x0 )

[*01/23/2021 12:36:51.0878] FWLOG: [48865]UNKNOWN 22:55 ( 0x3a, 0x10, 0x0, 0x10, 0x0 )

[*01/23/2021 12:36:51.9375] pid 2455'scurrent affinity mask: 3

[*01/23/2021 12:36:51.9375] pid 2455's newaffinity mask: 1

[*01/23/2021 12:36:54.4467]

[*01/23/2021 12:36:54.4467] Click schedmonitor: schedulers = 1

[*01/23/2021 12:36:55.1665]click-config/io-real.click:131: While configuring 'todev_wired0 :: ToDevice':

[*01/23/2021 12:36:55.1665] warning: device 'wired0' is down

[*01/23/2021 12:36:55.2665]click-config/io-real.click:131: While configuring 'fromdev_wired0 ::FromDevice':

[*01/23/2021 12:36:55.2665] warning: device 'wired0' is down

[*01/23/2021 12:36:58.0756]click-config/io-real.click:131: While initializing 'tohost_wired0 :: ToHost':

[*01/23/2021 12:36:58.0756] warning: device 'wired0' is down

[*01/23/2021 12:36:58.5455]wmi_dbg_cfg_send: mod[0]00000000 dbgcfg40000000 cfgvalid[0] 00000000cfgvalid[1] 00000000

[*01/23/2021 12:36:58.5554]wmi_dbg_cfg_send: mod[0]00000000 dbgcfg40000000 cfgvalid[0] 00000000cfgvalid[1] 00000000

[*01/23/2021 12:36:59.6051] chatter:tohost_srcr6 :: ToHost: device 'srcr6' went down

[*01/23/2021 12:36:59.6251] chatter:tohost_srcr6 :: ToHost: device 'srcr6' came up

[*01/23/2021 12:36:59.6251] ip6_port srcr6,ip6local fe80::72d3:79ff:fe30:4708, ip6 ::, plen 0, gw6 ::, gw6_mac00:00:00:00:00:00, mtu 1500, vid 0, mode6 3(slaac)

[*01/23/2021 12:37:00.4249] wired0: 1000Mbps Full Duplex

[*01/23/2021 12:37:00.4249]

[*01/23/2021 12:37:01.0147] ethernet_portwired0, ip xxx.xxx.xx.xxx, netmask 255.255.255.0, gw 192.168.xx.xxx, mtu 1500,bcast 192.168.xx.255, dns1 0.0.0.0, is_static true, vid 0, static_ip_failoverfalse, dhcp_vlan_failover false

[*01/23/2021 12:37:04.1238] ip6_port srcr6,ip6local , ip6 ,plen 64, gw6 f:, gw6_mac , mtu 1500,vid 0, mode6 3(slaac)

[*01/23/2021 12:37:07.0528] Loading sha2...

[*01/23/2021 12:37:07.0528] Dumppingsha1...

[*01/23/2021 12:37:08.4924] Loading MICcert and key

[*01/23/2021 12:37:08.5024] Dumppingsha2...

[*01/23/2021 12:37:09.9519] Loading MICcert and key

[*01/23/2021 12:37:10.3418] Generating key,this may take a while...

[*01/23/2021 12:37:14.3406] Public keyportion is:

[*01/23/2021 12:37:14.3406] ssh-rsaAAAAB3NzaC1yc2EAAAADAQABAAABAQCD0+M0C1ImLOs1zIL8s7Cx3PYcwrh5+Wvx4BUtXbWkR0+McTHLERiX/7KmUrIHEBLsdUpu5kIQQWRS8pOD8kmShNnbjibAAsMYHLY4JwNaJsBw+5hQDFawnerrbBtWc73CGnrRHzQIAMXLy4p3jswssrHTfNKQITw5z8+TMlnJpWvX5GdnBAopdnxB7aMnhlzRXAcvwjq4o5VG2qZLLg+Sx/WqFaOvHiiisanK1TwQLUZZuljdJ3jIlevXkjAOc5AWLw2jLMoI0WnR+pqsLmiU5IvyMg7erQc2HVW9PejIvi9wZ/AjBYe8FSEsz12YS7A0565bLc+eUtxbZN1aR2Vxroot@m70D379304708

[*01/23/2021 12:37:14.3406] Fingerprint:sha1!! ab:5e:f2:1a:d7:07:3c:ac:69:bd:8f:de:27:22:cb:63:74:93:77:dd

[*01/23/2021 12:37:14.4005] pid 4013'scurrent affinity mask: 3

[*01/23/2021 12:37:14.4005] pid 4013's newaffinity mask: 1

[*01/23/2021 12:37:14.9104] Password foruser changed

[*01/23/2021 12:37:15.0203] gzip -dc/etc/wcp.usermodule.template.gz | sed -e's/__TX_POWER_2G_FILE__/\/radio_fw\/S2.csv/g' -e's/__TX_POWER_5G_FILE__/\/radio_fw\/S5.csv/g' -e's/__EVM_POWER_2G_FILE__/\/radio_fw\/EVM_2.csv/g' -e's/__EVM_POWER_5G_FILE__/\/radio_fw\/EVM_5.csv/g' -e 's/__DOMAIN_2G__/1/g' -e's/__DOMAIN_5G__/12/g' -e 's/__PWR_TABLE_49G__/0/g' -e's/__PRODUCT_ID__/AIR-AP1832I-E-K9/g' -e 's/__AP_TYPE__/58/g' -e's/__WIRELESS_MAC__/xxx/g' -e 's/__WIRED_MAC__/xxx/g'-e 's/__WIRED1_MAC__/xxxx/g' |DMALLOC_OPTIONS=debug=0x400003,inter=1000,log=/tmp/wcp.dmalloc.log,limit=40000000wcpd &

[*01/23/2021 12:37:16.4499] DOT11_DRV[0]:Init Radio0

[*01/23/2021 12:37:16.4799] DOT11_DRV[0]:Stop Radio0

[*01/23/2021 12:37:16.4799] DOT11_DRV[0]:set_channel Channel set to 6

[*01/23/2021 12:37:16.4899] DOT11_DRV[1]:Init Radio1

[*01/23/2021 12:37:16.5199] DOT11_DRV[1]:Stop Radio1

[*01/23/2021 12:37:16.5199] DOT11_DRV[1]:set_channel Channel set to 36

[*01/23/2021 12:37:16.5199]CRIT-MeshControl:

[*01/23/2021 12:37:16.5199] Mesh Control:skipped adding wired1 backhaul

[*01/23/2021 12:37:17.1197] DOT11_CFG[0]Radio Mode is changed from Local to FlexConnect

[*01/23/2021 12:37:17.1197] DOT11_DRV[0]:Start Radio0

[*01/23/2021 12:37:17.1297] DOT11_CFG[1]Radio Mode is changed from Local to FlexConnect

[*01/23/2021 12:37:17.1297] DOT11_DRV[1]:Start Radio1

[*01/23/2021 12:37:17.1497] DOT11_DRV[0]:Stop Radio0

[*01/23/2021 12:37:17.4796] DOT11_DRV[0]:set_channel Channel set to 1

[*01/23/2021 12:37:17.4796] DOT11_DRV[0]:Start Radio0

[*01/23/2021 12:37:17.4796] DOT11_DRV[0]:Channel set to 1, width 20

[*01/23/2021 12:37:17.4896] DOT11_DRV[0]:Stop Radio0

[*01/23/2021 12:37:17.8295] DOT11_DRV[0]: StartRadio0

[*01/23/2021 12:37:17.8295] DOT11_DRV[0]:Channel set to 1, width 20

[*01/23/2021 12:37:17.8395] DOT11_DRV[1]:Stop Radio1

[*01/23/2021 12:37:17.8495] DOT11_DRV[1]:set_channel Channel set to 36

[*01/23/2021 12:37:17.8495] DOT11_DRV[1]:Start Radio1

[*01/23/2021 12:37:17.8595] DOT11_DRV[1]:Stop Radio1

[*01/23/2021 12:37:18.2593] DOT11_DRV[1]:Start Radio1

[*01/23/2021 12:37:18.2593] DOT11_DRV[1]:Channel set to 36, width 20

[*01/23/2021 12:37:18.2593] DOT11_DRV[1]:Stop Radio1

[*01/23/2021 12:37:18.2693] DOT11_DRV[1]:Start Radio1

[*01/23/2021 12:37:18.2693] DOT11_DRV[1]:Channel set to 36, width 20

[*01/23/2021 12:37:18.3093]/usr/sbin/capwapd: opening /click/cli_h/apr_bypass/active failed!: No such fileor directory

[*01/23/2021 12:37:18.3093]

[*01/23/2021 12:37:18.3093] !!!!!{/usr/sbin/capwapd} failed writing /click/cli_h/apr_bypass/active len 1 data:"1"

[*01/23/2021 12:37:18.3793] DOT11_CFG[0]Radio Mode is changed from FlexConnect to FlexConnect

[*01/23/2021 12:37:18.3793] DOT11_CFG[1]Radio Mode is changed from FlexConnect to FlexConnect

[*01/23/2021 12:37:18.4193] AP IPv4 Addressupdated from 0.0.0.0 to 192.168.xx.xxx

[*01/23/2021 12:37:18.4393] send CAPWAPctrl msg to the socket: Socket operation on non-socket

[*01/23/2021 12:37:18.4393]send_msg_to_capwap_sm: Capwap SM restart message send failed for message: 9

[*01/23/2021 12:37:18.4393] AP IPv6 Addressupdated from :: to

[*01/23/2021 12:40:07.4865] chatter:tohost_virtual :: ToHost: device 'virtual' went down

[*01/23/2021 12:40:07.4865] chatter:tohost_vlan0 :: ToHost: device 'vlan0' went down

[*01/23/2021 12:40:07.4965] chatter:tohost_vlan1 :: ToHost: device 'vlan1' went down

[*01/23/2021 12:40:07.4965] chatter:tohost_vlan2 :: ToHost: device 'vlan2' went down

[*01/23/2021 12:40:07.5064] chat

Cryptographic library self-test....

Testing SHA1 Short Message 1

Testing SHA256 Short Message 1

Testing SHA384 Short Message 1

SHA1 POST PASSED

Testing HMAC SHA1 Short Message 1

Testing HMAC SHA2 Short Message 1

Testing HMAC SHA384 Short Message 1

passed!

XML config selected

/bin/sh: /usr/bin/iptables: not found

Starting SSHD: ok

Validating XML configuration

Cisco is a trademark of Cisco Systems, Inc.

Software Copyright Cisco Systems, Inc. Allrights reserved.

Cisco AireOS Version 8.5.161.0

Initializing OS Services: ok

Initializing Serial Services: ok

Initializing Network Services: ok

Starting Statistics Service: ok

Starting ARP Services: ok

Starting Trap Manager: ok

Starting Network Interface ManagementServices: ok

Starting System Services: ok

Starting SNMP services: ok

Starting Fastpath Hardware Acceleration:Starting Switching Services: ok

Starting QoS Services: ok

Starting Policy Manager: ok

Starting Data Transport Link Layer: ok

Starting Access Control List Services: ok

Starting System Interfaces:

As the Mgmt Address is updated, all theDHCP scopes with Central NAT enabled will be disabled and enabled

As the Mgmt Address is updated, all theWLANs associated with central NAT enabled scopes will be enabled and disabled

ok

Starting Client Troubleshooting Service: ok

Starting Certificate Database: InitializingCurl Globally..

ok

Starting VPN Services: ok

Starting Management Frame Protection: ok

Starting DNS Services: ok

ok

Starting LWAPP: ok

Starting CAPWAP: ok

Starting LOCP: ok

Starting Security Services: ok

Starting Policy Manager: ok

Starting Authentication Engine: ok

Starting Mobility Management: ok

Starting Capwap Ping Component: ok

Starting AVC Services: ok

Starting AVC Flex Services: ok

Starting Virtual AP Services: ok

Starting AireWave Director: ok

Starting Network Time Services: ok

Starting Cisco Discovery Protocol: ok

Starting Broadcast Services: ok

Starting Logging Services: ok

Starting DHCP Server: ok

Starting IDS Signature Manager: ok

Starting RFID Tag Tracking: ok

Starting RF Profiles: ok

Starting Mesh Services: ok

Starting TSM: ok

Starting CIDS Services: ok

Starting Ethernet-over-IP: ok

Starting DTLS server: enabled in CAPWAP

Starting CleanAir: ok

Starting WIPS: ok

Starting SSHPM LSC PROV LIST: ok

Starting RRC Services: ok

Starting SXP Services: ok

Starting Alarm Services: ok

Starting FMC HS: ok

Starting FLEXEXPRESS ConfigSync Task: ok

Starting Hotspot Services: ok

Starting HTTP Image Download Task: ok

Starting Tunnel Services New: ok

Starting Portal Server Services: ok

Starting Management Services:

Web Server: CLI: Secure Web: ok

Starting IPSec Profiles component: ok

Starting CPU ACL Logging services: ok

(Cisco Controller)

Enter User Name (or 'Recover-Config' thisone-time only to reset configuration to factory defaults)

User: